Documentation

nxos_facts - Gets facts about NX-OS switches

New in version 2.1.

Synopsis

  • Collects facts from Cisco Nexus devices running the NX-OS operating system. Fact collection is supported over both Cli and Nxapi transports. This module prepends all of the base network fact keys with ansible_net_<fact>. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.

Options

parameter required default choices comments
gather_subset
(added in 2.2)
no !config
When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, legacy, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected.
host
yes
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
no
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
no 0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
provider
no
Convenience method that allows all nxos arguments to be passed as a dict object. All constraints (required, choices, etc) must be met either by individual arguments or values in this dict.
ssh_keyfile
no
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
(added in 2.3)
no 10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
yes cli
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_ssl
no
  • yes
  • no
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
username
no
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
no
  • yes
  • no
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

Examples

- nxos_facts:
    gather_subset: all

# Collect only the config and default facts
- nxos_facts:
    gather_subset:
      - config

# Do not collect hardware facts
- nxos_facts:
    gather_subset:
      - "!hardware"

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name description returned type sample
fan_info
A hash of facts about fans in the remote device
when legacy is configured dict
kickstart
The software version used to boot the system
when legacy is configured str
ansible_net_all_ipv4_addresses
All IPv4 addresses configured on the device
when interfaces is configured list
ansible_net_hostname
The configured hostname of the device
always string
ansible_net_model
The model name returned from the device
always str
ansible_net_serialnum
The serial number of the remote device
always str
module
A hash of facts about the modules in a remote device
when legacy is configured dict
vlan_list
The list of VLAN IDs configured on the remote device
when legacy is configured list
ansible_net_version
The operating system version running on the remote device
always str
ansible_net_memtotal_mb
The total memory on the remote device in Mb
when hardware is configured int
ansible_net_filesystems
All file system names available on the device
when hardware is configured list
ansible_net_image
The image file the device is running
always string
platform
The hardware platform reported by the remote device
when legacy is configured str
ansible_net_config
The current active config from the device
when config is configured str
interfaces_list
The list of interface names on the remote device
when legacy is configured dict
ansible_net_gather_subset
The list of fact subsets collected from the device
always list
power_supply_info
A hash of facts about the power supplies in the remote device
when legacy is configured str
ansible_net_interfaces
A hash of all interfaces running on the system
when interfaces is configured dict
ansible_net_all_ipv6_addresses
All IPv6 addresses configured on the device
when interfaces is configured list
ansible_net_neighbors
The list of LLDP neighbors from the remote device
when interfaces is configured dict
ansible_net_memfree_mb
The available free memory on the remote device in Mb
when hardware is configured int
hostname
The configured hostname of the remote device
when legacy is configured dict


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance Info

For more information about Red Hat’s this support of this module, please refer to this knowledge base article<https://access.redhat.com/articles/rhel-top-support-policies>

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.