Documentation

nxos_snmp_traps - Manages SNMP traps.

New in version 2.2.

Synopsis

  • Manages SNMP traps configurations.

Options

parameter required default choices comments
group
yes
  • aaa
  • bridge
  • callhome
  • cfs
  • config
  • entity
  • feature-control
  • hsrp
  • license
  • link
  • lldp
  • ospf
  • pim
  • rf
  • rmon
  • snmp
  • storm-control
  • stpx
  • sysmgr
  • system
  • upgrade
  • vtp
  • all
Case sensitive group.
host
yes
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
no
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
no 0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
provider
no
Convenience method that allows all nxos arguments to be passed as a dict object. All constraints (required, choices, etc) must be met either by individual arguments or values in this dict.
ssh_keyfile
no
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
state
no enabled
  • enabled
  • disabled
Manage the state of the resource.
timeout
(added in 2.3)
no 10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
yes cli
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_ssl
no
  • yes
  • no
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
username
no
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
no
  • yes
  • no
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.

Examples

# ensure lldp trap configured
- nxos_snmp_traps:
    group: lldp
    state: enabled

# ensure lldp trap is not configured
- nxos_snmp_traps:
    group: lldp
    state: disabled

Return Values

Common return values are documented here Return Values, the following are the fields unique to this module:

name description returned type sample
commands
command sent to the device
always list snmp-server enable traps lldp ;


Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • This module works at the group level for traps. If you need to only enable/disable 1 specific trap within a group, use the nxos_command module.
  • Be aware that you can set a trap only for an enabled feature.

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance Info

For more information about Red Hat’s this support of this module, please refer to this knowledge base article<https://access.redhat.com/articles/rhel-top-support-policies>

For help in developing on modules, should you be so inclined, please read Community Information & Contributing, Testing Ansible and Developing Modules.