vyos.vyos.vyos_ospf_interfaces – OSPF Interfaces Resource Module.

Note

This plugin is part of the vyos.vyos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_ospf_interfaces.

New in version 1.2.0: of vyos.vyos

Synopsis

  • This module manages OSPF configuration of interfaces on devices running VYOS.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of OSPF configuration for interfaces.

address_family

list / elements=dictionary

OSPF settings on the interfaces in address-family context.

afi

string / required

Address Family Identifier (AFI) for OSPF settings on the interfaces.

Choices:

  • ipv4

  • ipv6

authentication

dictionary

Authentication settings on the interface.

md5_key

dictionary

md5 parameters.

key

string

md5 key.

key_id

integer

key id.

plaintext_password

string

Plain Text password.

bandwidth

integer

Bandwidth of interface (kilobits/sec)

cost

integer

metric associated with interface.

dead_interval

integer

Time interval to detect a dead router.

hello_interval

integer

Timer interval between transmission of hello packets.

ifmtu

integer

interface MTU.

instance

string

Instance ID.

mtu_ignore

boolean

if True, Disable MTU check for Database Description packets.

Choices:

  • no

  • yes

network

string

Interface type.

passive

boolean

If True, disables forming adjacency.

Choices:

  • no

  • yes

priority

integer

Interface priority.

retransmit_interval

integer

LSA retransmission interval.

transmit_delay

integer

LSA transmission delay.

name

string

Name/Identifier of the interface.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the VYOS device by executing the command show configuration commands | match “set interfaces”.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • gathered

  • parsed

  • rendered

Examples

# Using merged
#
# Before state:
# -------------
#

# @vyos:~$ show configuration commands | match "ospf"

  - name: Merge provided configuration with device configuration
    vyos.vyos.vyos_ospf_interfaces:
      config:
        - name: "eth1"
          address_family:
            - afi: "ipv4"
              transmit_delay: 50
              priority: 26
              network: "point-to-point"
            - afi: "ipv6"
              dead_interval: 39
        - name: "bond2"
          address_family:
            - afi: "ipv4"
              transmit_delay: 45
              bandwidth: 70
              authentication:
                md5_key:
                  key_id: 10
                  key: "1111111111232345"
            - afi: "ipv6"
              passive: True
      state: merged

# After State:
# --------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'

# "after": [
#        "
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "before": [
#        {
#            "name": "eth0"
#        },
#        {
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "changed": true,
#    "commands": [
#        "set interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "set interfaces ethernet eth1 ip ospf priority 26",
#        "set interfaces ethernet eth1 ip ospf network point-to-point",
#        "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "set interfaces bonding bond2 ip ospf transmit-delay 45",
#        "set interfaces bonding bond2 ip ospf bandwidth 70",
#        "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
#        "set interfaces bonding bond2 ipv6 ospfv3 passive"
#    ],




# Using replaced:

# Before State:
# ------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'

  - name: Replace provided configuration with device configuration
    vyos.vyos.vyos_ospf_interfaces:
      config:
        - name: "eth1"
          address_family:
            - afi: "ipv4"
              cost: 100
            - afi: "ipv6"
              ifmtu: 33
        - name: "bond2"
          address_family:
            - afi: "ipv4"
              transmit_delay: 45
            - afi: "ipv6"
              passive: True
      state: replaced

# After State:
# -----------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$

# Module Execution
# ----------------
#    "after": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "cost": 100
#                },
#                {
#                    "afi": "ipv6",
#                    "ifmtu": 33
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "before": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],
#    "changed": true,
#    "commands": [
#        "set interfaces ethernet eth1 ip ospf cost 100",
#        "set interfaces ethernet eth1 ipv6 ospfv3 ifmtu 33",
#        "delete interfaces ethernet eth1 ip ospf network point-to-point",
#        "delete interfaces ethernet eth1 ip ospf priority 26",
#        "delete interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "delete interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "delete interfaces bonding bond2 ip ospf authentication",
#        "delete interfaces bonding bond2 ip ospf bandwidth 70"
#    ],
#

# Using Overridden:
# -----------------

# Before State:
# ------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf cost '100'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# set interfaces ethernet eth1 ipv6 ospfv3 ifmtu '33'
# vyos@vyos:~$

  - name: Override device configuration with provided configuration
    vyos.vyos.vyos_ospf_interfaces:
      config:
        - name: "eth0"
          address_family:
            - afi: "ipv4"
              cost: 100
            - afi: "ipv6"
              ifmtu: 33
              passive: True
      state: overridden
# After State:
# -----------

# 200~vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# vyos@vyos:~$
#
#
#     "after": [
#         {
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100
#                 },
#                 {
#                     "afi": "ipv6",
#                     "ifmtu": 33,
#                     "passive": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100,
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39,
#                     "ifmtu": 33
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete interfaces bonding bond2 ip ospf",
#         "delete interfaces bonding bond2 ipv6 ospfv3",
#         "delete interfaces ethernet eth1 ip ospf",
#         "delete interfaces ethernet eth1 ipv6 ospfv3",
#         "set interfaces ethernet eth0 ip ospf cost 100",
#         "set interfaces ethernet eth0 ipv6 ospfv3 ifmtu 33",
#         "set interfaces ethernet eth0 ipv6 ospfv3 passive"
#     ],
#

# Using deleted:
# -------------

# before state:
# -------------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '100'
# set interfaces ethernet eth0 ipv6 ospfv3 ifmtu '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$

  - name: Delete device configuration
    vyos.vyos.vyos_ospf_interfaces:
      config:
        - name: "eth0"
      state: deleted

# After State:
# -----------

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$
#
#
# "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 100
#                 },
#                 {
#                     "afi": "ipv6",
#                     "ifmtu": 33,
#                     "passive": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         },
#         {
#             "name": "eth2"
#         },
#         {
#             "name": "eth3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete interfaces ethernet eth0 ip ospf",
#         "delete interfaces ethernet eth0 ipv6 ospfv3"
#     ],
#
# Using parsed:
# parsed.cfg:

# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth0 ip ospf cost '50'
# set interfaces ethernet eth0 ip ospf priority '26'
# set interfaces ethernet eth0 ipv6 ospfv3 instance-id '33'
# set interfaces ethernet eth0 ipv6 ospfv3 'mtu-ignore'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
#

  - name: parse configs
    vyos.vyos.vyos_ospf_interfaces:
      running_config: "{{ lookup('file', './parsed.cfg') }}"
      state: parsed

# Module Execution:
# ----------------

#  "parsed": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "md5_key": {
#                             "key": "1111111111232345",
#                             "key_id": 10
#                         }
#                     },
#                     "bandwidth": 70,
#                     "transmit_delay": 45
#                 },
#                 {
#                     "afi": "ipv6",
#                     "passive": true
#                 }
#             ],
#             "name": "bond2"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "cost": 50,
#                     "priority": 26
#                 },
#                 {
#                     "afi": "ipv6",
#                     "instance": "33",
#                     "mtu_ignore": true
#                 }
#             ],
#             "name": "eth0"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "network": "point-to-point",
#                     "priority": 26,
#                     "transmit_delay": 50
#                 },
#                 {
#                     "afi": "ipv6",
#                     "dead_interval": 39
#                 }
#             ],
#             "name": "eth1"
#         }
#     ]

# Using rendered:
# --------------

  - name: Render
    vyos.vyos.vyos_ospf_interfaces:
      config:
        - name: "eth1"
          address_family:
            - afi: "ipv4"
              transmit_delay: 50
              priority: 26
              network: "point-to-point"
            - afi: "ipv6"
              dead_interval: 39
        - name: "bond2"
          address_family:
            - afi: "ipv4"
              transmit_delay: 45
              bandwidth: 70
              authentication:
                md5_key:
                  key_id: 10
                  key: "1111111111232345"
            - afi: "ipv6"
              passive: True
      state: rendered

# Module Execution:
# ----------------

#    "rendered": [
#        "set interfaces ethernet eth1 ip ospf transmit-delay 50",
#        "set interfaces ethernet eth1 ip ospf priority 26",
#        "set interfaces ethernet eth1 ip ospf network point-to-point",
#        "set interfaces ethernet eth1 ipv6 ospfv3 dead-interval 39",
#        "set interfaces bonding bond2 ip ospf transmit-delay 45",
#        "set interfaces bonding bond2 ip ospf bandwidth 70",
#        "set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key 1111111111232345",
#        "set interfaces bonding bond2 ipv6 ospfv3 passive"
#    ]
#

# Using Gathered:
# --------------

# Native Config:

# vyos@vyos:~$ show configuration commands | match "ospf"
# set interfaces bonding bond2 ip ospf authentication md5 key-id 10 md5-key '1111111111232345'
# set interfaces bonding bond2 ip ospf bandwidth '70'
# set interfaces bonding bond2 ip ospf transmit-delay '45'
# set interfaces bonding bond2 ipv6 ospfv3 'passive'
# set interfaces ethernet eth1 ip ospf network 'point-to-point'
# set interfaces ethernet eth1 ip ospf priority '26'
# set interfaces ethernet eth1 ip ospf transmit-delay '50'
# set interfaces ethernet eth1 ipv6 ospfv3 dead-interval '39'
# vyos@vyos:~$

  - name: gather configs
    vyos.vyos.vyos_ospf_interfaces:
      state: gathered

# Module Execution:
# -----------------

#    "gathered": [
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "authentication": {
#                        "md5_key": {
#                            "key": "1111111111232345",
#                            "key_id": 10
#                        }
#                    },
#                    "bandwidth": 70,
#                    "transmit_delay": 45
#                },
#                {
#                    "afi": "ipv6",
#                    "passive": true
#                }
#            ],
#            "name": "bond2"
#        },
#        {
#            "name": "eth0"
#        },
#        {
#            "address_family": [
#                {
#                    "afi": "ipv4",
#                    "network": "point-to-point",
#                    "priority": 26,
#                    "transmit_delay": 50
#                },
#                {
#                    "afi": "ipv6",
#                    "dead_interval": 39
#                }
#            ],
#            "name": "eth1"
#        },
#        {
#            "name": "eth2"
#        },
#        {
#            "name": "eth3"
#        }
#    ],

Authors

  • Gomathi Selvi Srinivasan (@GomathiselviS)