Documentation
  • Docs »
  • na_ontap_interface – NetApp ONTAP LIF configuration

na_ontap_interface – NetApp ONTAP LIF configuration

New in version 2.6.

Synopsis

  • Creating / deleting and modifying the LIF.

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
  • Ansible 2.6
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
address
-
Specifies the LIF's IP address.
Required when state=present
admin_status
-
    Choices:
  • up
  • down
Specifies the administrative status of the LIF.
failover_policy
-
Specifies the failover policy for the LIF.
Possible values are 'disabled', 'system-defined', 'local-only', 'sfo-partner-only', and 'broadcast-domain-wide'
firewall_policy
-
Specifies the firewall policy for the LIF.
force_subnet_association
boolean
added in 2.9
    Choices:
  • no
  • yes
Set this to true to acquire the address from the named subnet and assign the subnet to the LIF.
home_node
-
Specifies the LIF's home node.
By default, the first node from the cluster is considered as home node
home_port
-
Specifies the LIF's home port.
Required when state=present
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
interface_name
- / required
Specifies the logical interface (LIF) name.
is_auto_revert
boolean
    Choices:
  • no
  • yes
If true, data LIF will revert to its home node under certain circumstances such as startup, and load balancing migration capability is disabled automatically
netmask
-
Specifies the LIF's netmask.
Required when state=present.
ontapi
integer
The ontap api version to use
password
string / required
Password for the specified user.

aliases: pass
protocols
-
Specifies the list of data protocols configured on the LIF. By default, the values in this element are nfs, cifs and fcache.
Other supported protocols are iscsi and fcp. A LIF can be configured to not support any data protocols by specifying 'none'.
Protocol values of none, iscsi, fc-nvme or fcp can't be combined with any other data protocol(s).
address, netmask and firewall_policy parameters are not supported for 'fc-nvme' option.
role
-
Specifies the role of the LIF.
When setting role as "intercluster", setting protocol is not supported.
Required when state=present.
state
-
    Choices:
  • present ←
  • absent
Whether the specified interface should exist or not.
subnet_name
-
added in 2.8
Subnet where the interface address is allocated from. If the option is not used, the IP address will need to be provided by the administrator during configuration.
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
- / required
The name of the vserver to use.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Create interface
  na_ontap_interface:
    state: present
    interface_name: data2
    home_port: e0d
    home_node: laurentn-vsim1
    role: data
    protocols: nfs
    admin_status: up
    failover_policy: local-only
    firewall_policy: mgmt
    is_auto_revert: true
    address: 10.10.10.10
    netmask: 255.255.255.0
    force_subnet_association: false
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

- name: Delete interface
  na_ontap_interface:
    state: absent
    interface_name: data2
    vserver: svm1
    hostname: "{{ netapp_hostname }}"
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"

Status

Authors

Hint

If you notice any issues in this documentation you can edit this document to improve it.