vyos_l3_interfaces – Manages L3 interface attributes of VyOS network devices

New in version 2.9.

Synopsis

  • This module manages the L3 interface attributes on VyOS network devices.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
The provided L3 interfaces configuration.
ipv4
list / elements=dictionary
List of IPv4 addresses of the interface.
address
string
IPv4 address of the interface.
ipv6
list / elements=dictionary
List of IPv6 addresses of the interface.
address
string
IPv6 address of the interface.
name
string / required
Full name of the interface, e.g. eth0, eth1.
vifs
list / elements=dictionary
Virtual sub-interfaces L3 configurations.
ipv4
list / elements=dictionary
List of IPv4 addresses of the virtual interface.
address
string
IPv4 address of the virtual interface.
ipv6
list / elements=dictionary
List of IPv6 addresses of the virtual interface.
address
string
IPv6 address of the virtual interface.
vlan_id
integer
Identifier for the virtual sub-interface.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102

- name: Merge provided configuration with device configuration
  vyos_l3_interfaces:
    config:
      - name: eth2
        ipv4:
          - address: 192.0.2.10/28
          - address: 198.51.100.40/27
        ipv6:
          - address: 2001:db8:100::2/32
          - address: 2001:db8:400::10/32

      - name: eth3
        ipv4:
          - address: 203.0.113.65/26
        vifs:
          - vlan_id: 101
            ipv4:
              - address: 192.0.2.71/28
              - address: 198.51.100.131/25
          - vlan_id: 102
            ipv6:
              - address: 2001:db8:1000::5/38
              - address: 2001:db8:1400::3/38
    state: merged

# After state:
# -------------
#
# vyos:~$ show configuration commands | grep -e eth[2,3]
# set interfaces ethernet eth2 address '192.0.2.10/28'
# set interfaces ethernet eth2 address '198.51.100.40/27'
# set interfaces ethernet eth2 address '2001:db8:100::2/32'
# set interfaces ethernet eth2 address '2001:db8:400::10/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '203.0.113.65/26'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '192.0.2.71/28'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1000::5/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:1400::3/38'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'


# Using replaced
#
# Before state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
#
- name: Replace device configurations of listed interfaces with provided configurations
  vyos_l3_interfaces:
    config:
      - name: eth2
        ipv4:
          - address: 192.0.2.10/24

      - name: eth3
        ipv6:
          - address: 2001:db8::11/32
    state: replaced

# After state:
# -------------
#
# vyos:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 address '2001:db8::11/32'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102


# Using overridden
#
# Before state
# --------------
#
# [email protected]:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'

- name: Overrides all device configuration with provided configuration
  vyos_l3_interfaces:
    config:
      - name: eth0
        ipv4:
          - address: dhcp
        ipv6:
          - address: dhcpv6
    state: overridden

# After state
# ------------
#
# [email protected]:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 address 'dhcpv6'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101
# set interfaces ethernet eth3 vif 102


# Using deleted
#
# Before state
# -------------
# [email protected]:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
# set interfaces ethernet eth1 address '192.0.2.14/24'
# set interfaces ethernet eth2 address '192.0.2.10/24'
# set interfaces ethernet eth2 address '192.0.2.11/24'
# set interfaces ethernet eth2 address '2001:db8::10/32'
# set interfaces ethernet eth2 address '2001:db8::11/32'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth3 address '198.51.100.10/24'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'

- name: Delete L3 attributes of given interfaces (Note - This won't delete the interface itself)
  vyos_l3_interfaces:
    config:
      - name: eth1
      - name: eth2
      - name: eth3
    state: deleted

# After state
# ------------
# [email protected]:~$ show configuration commands | grep eth
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
# set interfaces ethernet eth1 smp_affinity 'auto'
# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
# set interfaces ethernet eth2 smp_affinity 'auto'
# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
# set interfaces ethernet eth3 smp_affinity 'auto'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['set interfaces ethernet eth1 192.0.2.14/2', 'set interfaces ethernet eth3 vif 101 address 198.51.100.130/25']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Nilashish Chakraborty (@NilashishC)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.