vyos_lldp_interfaces – Manages attributes of lldp interfaces on VyOS devices

New in version 2.9.

Synopsis

  • This module manages attributes of lldp interfaces on VyOS network devices.

Parameters

Parameter Choices/Defaults Comments
config
list
A list of lldp interfaces configurations.
enable
boolean
    Choices:
  • no
  • yes ←
to disable lldp on the interface.
location
dictionary
LLDP-MED location data.
civic_based
dictionary
Civic-based location data.
ca_info
list
LLDP-MED address info
ca_type
integer / required
LLDP-MED Civic Address type.
ca_value
string / required
LLDP-MED Civic Address value.
country_code
string / required
Country Code
coordinate_based
dictionary
Coordinate-based location.
altitude
integer
Altitude in meters.
datum
string
    Choices:
  • WGS84
  • NAD83
  • MLLW
Coordinate datum type.
latitude
string / required
Latitude.
longitude
string / required
Longitude.
elin
string
Emergency Call Service ELIN number (between 10-25 numbers).
name
string / required
Name of the lldp interface.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
The state of the configuration after module completion.

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# [email protected]:~$ show configuration  commands | grep lldp
#
- name: Merge provided configuration with device configuration
  vyos_lldp_interfaces:
    config:
      - name: 'eth1'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth2'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
#    "commands": [
#        "set service lldp interface eth1 location civic-based country-code 'US'",
#        "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "set service lldp interface eth1",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth2 location coordinate-based altitude '2200'",
#        "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
#        "set service lldp interface eth2"
#
# "after": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ],
#
# After state:
# -------------
#
# [email protected]:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'


# Using replaced
#
# Before state:
# -------------
#
# [email protected]:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Replace device configurations of listed LLDP interfaces with provided configurations
  vyos_lldp_interfaces:
    config:
      - name: 'eth2'
        location:
          civic_based:
            country_code: 'US'
            ca_info:
              - ca_type: 0
                ca_value: 'ENGLISH'

      - name: 'eth1'
        location:
          coordinate_based:
           altitude: 2200
           datum: 'WGS84'
           longitude: '222.267255W'
           latitude: '33.524449N'
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "set service lldp interface eth2 'disable'",
#        "set service lldp interface eth2 location civic-based country-code 'US'",
#        "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'",
#        "delete service lldp interface eth1 location",
#        "set service lldp interface eth1 'disable'",
#        "set service lldp interface eth1 location coordinate-based latitude '33.524449N'",
#        "set service lldp interface eth1 location coordinate-based altitude '2200'",
#        "set service lldp interface eth1 location coordinate-based datum 'WGS84'",
#        "set service lldp interface eth1 location coordinate-based longitude '222.267255W'"
#    ]
#
#    "after": [
#        {
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
# After state:
# -------------
#
# [email protected]:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'


# Using overridden
#
# Before state
# --------------
#
# [email protected]:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
#
- name: Overrides all device configuration with provided configuration
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
       location:
         elin: 0000000911

    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
#        {
#            "enable": false,
#            "location": {
#                "civic_based": {
#                    "ca_info": [
#                        {
#                            "ca_type": 0,
#                            "ca_value": "ENGLISH"
#                        }
#                    ],
#                    "country_code": "US"
#                }
#            },
#            "name": "eth2"
#        },
#        {
#            "enable": false,
#            "location": {
#                "coordinate_based": {
#                    "altitude": 2200,
#                    "datum": "WGS84",
#                    "latitude": "33.524449N",
#                    "longitude": "222.267255W"
#                }
#            },
#            "name": "eth1"
#        }
#    ]
#
#    "commands": [
#        "delete service lldp interface eth2 location",
#        "delete service lldp interface eth2 disable",
#        "set service lldp interface eth2 location elin 0000000911"
#
#
#    "after": [
#        {
#            "location": {
#                "elin": 0000000911
#            },
#            "name": "eth2"
#        }
#    ]
#
#
# After state
# ------------
#
# [email protected]# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'


# Using deleted
#
# Before state
# -------------
#
# [email protected]# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
#
- name: Delete lldp  interface attributes of given interfaces.
  vyos_lag_interfaces:
    config:
     - name: 'eth2'
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
    "before": [
        {
            "location": {
                "elin": 0000000911
            },
            "name": "eth2"
        }
    ]
# "commands": [
#    "commands": [
#        "delete service lldp interface eth2"
#    ]
#
# "after": []
# After state
# ------------
# [email protected]# run show configuration commands | grep lldp
# set service 'lldp'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']


Status

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

  • Rohit Thakur (@rohitthakur2590)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.