mellanox.onyx.onyx_qos – Configures QoS

Note

This plugin is part of the mellanox.onyx collection.

To install it use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_qos.

Synopsis

  • This module provides declarative management of Onyx QoS configuration on Mellanox ONYX network devices.

Parameters

Parameter Choices/Defaults Comments
interfaces
string / required
list of interfaces name.
rewrite_dscp
string
    Choices:
  • enabled
  • disabled ←
rewrite with type dscp.
rewrite_pcp
string
    Choices:
  • enabled
  • disabled ←
rewrite with type pcp.
trust
string
    Choices:
  • L2 ←
  • L3
  • both
trust type.

Notes

Note

  • Tested on ONYX 3.6.8130

Examples

- name: Configure QoS
  onyx_QoS:
    interfaces:
      - Mpo7
      - Mpo7
    trust: L3
    rewrite_pcp: disabled
    rewrite_dscp: enabled

- name: Configure QoS
  onyx_QoS:
    interfaces:
      - Eth1/1
      - Eth1/2
    trust: both
    rewrite_pcp: disabled
    rewrite_dscp: enabled

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
The list of configuration mode commands to send to the device.

Sample:
['interface ethernet 1/16 qos trust L3', 'interface mlag-port-channel 7 qos trust L3', 'interface port-channel 1 qos trust L3', 'interface mlag-port-channel 7 qos trust L2', 'interface mlag-port-channel 7 qos rewrite dscp', 'interface ethernet 1/16 qos rewrite pcp', 'interface ethernet 1/1 no qos rewrite pcp']


Authors

  • Anas Badaha (@anasb)