vyos.vyos.vyos_lldp_interface – (deprecated, removed after 2022-06-01) Manage LLDP interfaces configuration on VyOS network devices

Note

This plugin is part of the vyos.vyos collection.

To install it use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_lldp_interface.

New in version 1.0.0: of vyos.vyos

DEPRECATED

Removed in

major release after 2022-06-01

Why

Updated modules released with more functionality.

Alternative

vyos_lldp_interfaces

Synopsis

  • This module provides declarative management of LLDP interfaces configuration on VyOS network devices.

Parameters

Parameter Choices/Defaults Comments
aggregate
list / elements=dictionary
List of interfaces LLDP should be configured on.
name
string / required
Name of the interface LLDP should be configured on.
state
string
    Choices:
  • present
  • absent
  • enabled
  • disabled
State of the LLDP configuration.
name
string
Name of the interface LLDP should be configured on.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
For more information please see the Network Guide.

A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device.
ssh_keyfile
path
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
state
string
    Choices:
  • present ←
  • absent
  • enabled
  • disabled
State of the LLDP configuration.

Notes

Note

  • Tested against VYOS 1.1.7

  • For more information on using Ansible to manage network devices see the Ansible Network Guide

Examples

- name: Enable LLDP on eth1
  net_lldp_interface:
    state: present

- name: Enable LLDP on specific interfaces
  net_lldp_interface:
    interfaces:
    - eth1
    - eth2
    state: present

- name: Disable LLDP globally
  net_lldp_interface:
    state: disabled

- name: Create aggregate of LLDP interface configurations
  vyos.vyos.vyos_lldp_interface:
    aggregate:
    - name: eth1
    - name: eth2
    state: present

- name: Delete aggregate of LLDP interface configurations
  vyos.vyos.vyos_lldp_interface:
    aggregate:
    - name: eth1
    - name: eth2
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['set service lldp eth1', 'set service lldp eth2 disable']


Status

  • This module will be removed in a major release after 2022-06-01. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Ricardo Carrillo Cruz (@rcarrillocruz)