vyos.vyos.vyos_firewall_interfaces module – Firewall interfaces resource module
Note
This module is part of the vyos.vyos collection (version 6.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install vyos.vyos.
To use it in a playbook, specify: vyos.vyos.vyos_firewall_interfaces.
New in vyos.vyos 1.0.0
Synopsis
Manage firewall rules of interfaces on VyOS network devices. (1.3-)
Parameters
Parameter |
Comments |
|---|---|
A list of firewall rules options for interfaces. |
|
Specifies firewall rules attached to the interfaces. |
|
Specifies the AFI for the Firewall rules to be configured on this interface. Choices:
|
|
Specifies the firewall rules for the provided AFI. |
|
Specifies the direction of packets that the firewall rule will be applied on. Choices:
|
|
Specifies the name of the IPv4/IPv6 Firewall rule for the interface. |
|
Name/Identifier for the interface. |
|
The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command |
|
The state the configuration should be left in. Choices:
|
Notes
Note
Deprecated in VyOS 1.4+, firewalls are no longer connected directly to interfaces. See the Firewall Configuration documentation for how to establish a connection betwen the firewall rulesets and the flow, interface, or zone.
Examples
# Using merged
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
#
- name: Merge the provided configuration with the existing running configuration
vyos.vyos.vyos_firewall_interfaces:
config:
- access_rules:
- afi: ipv4
rules:
- name: INBOUND
direction: in
- name: OUTBOUND
direction: out
- name: LOCAL
direction: local
- afi: ipv6
rules:
- name: V6-LOCAL
direction: local
name: eth1
- access_rules:
- afi: ipv4
rules:
- name: INBOUND
direction: in
- name: OUTBOUND
direction: out
- name: LOCAL
direction: local
- afi: ipv6
rules:
- name: V6-LOCAL
direction: local
name: eth3
state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": [
# {
# "name": "eth0"
# },
# {
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ]
#
# "commands": [
# "set interfaces ethernet eth1 firewall in name 'INBOUND'",
# "set interfaces ethernet eth1 firewall out name 'OUTBOUND'",
# "set interfaces ethernet eth1 firewall local name 'LOCAL'",
# "set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'",
# "set interfaces ethernet eth3 firewall in name 'INBOUND'",
# "set interfaces ethernet eth3 firewall out name 'OUTBOUND'",
# "set interfaces ethernet eth3 firewall local name 'LOCAL'",
# "set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'"
# ]
#
# "after": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall in name 'INBOUND'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall local name 'LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth3 firewall local name 'LOCAL'
# set interfaces ethernet eth3 firewall out name 'OUTBOUND'
# Using merged
# Before state:
# -------------
# vyos@vyos:~$ show configuration commands | grep interfaces
# set interfaces bonding 'bond0'
# set interfaces bonding 'bond1'
# set interfaces bonding bond2 'ip'
# set interfaces bonding bond2 'ipv6'
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 'ip'
# set interfaces ethernet eth0 'ipv6'
# set interfaces ethernet eth0 smp_affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet 'eth1'
# set interfaces ethernet 'eth2'
- name: Merge provided configuration with device configuration
vyos.vyos.vyos_interfaces:
config:
- name: eth2
description: Configured by Ansible
enabled: true
vifs:
- vlan_id: 200
description: VIF 200 - ETH2
- name: eth3
description: Configured by Ansible
mtu: 1500
- name: bond1
description: Bond - 1
mtu: 1200
- name: vti2
description: VTI - 2
enabled: false
state: merged
# Task Output
# -----------
# before:
# - enabled: true
# name: lo
# - enabled: true
# name: eth3
# - enabled: true
# name: eth2
# - enabled: true
# name: eth1
# - duplex: auto
# enabled: true
# name: eth0
# speed: auto
# commands:
# - set interfaces ethernet eth2 description 'Configured by Ansible'
# - set interfaces ethernet eth2 vif 200
# - set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'
# - set interfaces ethernet eth3 description 'Configured by Ansible'
# - set interfaces ethernet eth3 mtu '1500'
# - set interfaces bonding bond1
# - set interfaces bonding bond1 description 'Bond - 1'
# - set interfaces bonding bond1 mtu '1200'
# - set interfaces vti vti2
# - set interfaces vti vti2 description 'VTI - 2'
# - set interfaces vti vti2 disable
# after:
# - description: Bond - 1
# enabled: true
# mtu: 1200
# name: bond1
# - enabled: true
# name: lo
# - description: VTI - 2
# enabled: false
# name: vti2
# - description: Configured by Ansible
# enabled: true
# mtu: 1500
# name: eth3
# - description: Configured by Ansible
# enabled: true
# name: eth2
# vifs:
# - description: VIF 200 - ETH2
# enabled: true
# vlan_id: '200'
# - enabled: true
# name: eth1
# - duplex: auto
# enabled: true
# name: eth0
# speed: auto
# After state:
# ------------
# vyos@vyos:~$ show configuration commands | grep interfaces
# set interfaces bonding bond1 description 'Bond - 1'
# set interfaces bonding bond1 mtu '1200'
# set interfaces ethernet eth0 address 'dhcp'
# set interfaces ethernet eth0 address 'dhcpv6'
# set interfaces ethernet eth0 duplex 'auto'
# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
# set interfaces ethernet eth0 smp-affinity 'auto'
# set interfaces ethernet eth0 speed 'auto'
# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
# set interfaces ethernet eth1 smp-affinity 'auto'
# set interfaces ethernet eth2 description 'Configured by Ansible'
# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
# set interfaces ethernet eth2 smp-affinity 'auto'
# set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'
# set interfaces ethernet eth3 description 'Configured by Ansible'
# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
# set interfaces ethernet eth3 mtu '1500'
# set interfaces loopback lo
# set interfaces vti vti2 description 'VTI - 2'
# set interfaces vti vti2 disable
# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall in name 'INBOUND'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall local name 'LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth3 firewall local name 'LOCAL'
# set interfaces ethernet eth3 firewall out name 'OUTBOUND'
#
- name: >-
Replace device configurations of listed firewall interfaces with provided
configurations
vyos.vyos.vyos_firewall_interfaces:
config:
- name: eth1
access_rules:
- afi: ipv4
rules:
- name: OUTBOUND
direction: out
- afi: ipv6
rules:
- name: V6-LOCAL
direction: local
- name: eth3
access_rules:
- afi: ipv4
rules:
- name: INBOUND
direction: in
state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
# "commands": [
# "delete interfaces ethernet eth1 firewall in name",
# "delete interfaces ethernet eth1 firewall local name",
# "delete interfaces ethernet eth3 firewall local name",
# "delete interfaces ethernet eth3 firewall out name",
# "delete interfaces ethernet eth3 firewall local ipv6-name"
# ]
#
# "after": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall 'in'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall 'local'
# set interfaces ethernet eth3 firewall 'out'
# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall 'in'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall 'local'
# set interfaces ethernet eth3 firewall 'out'
#
- name: Overrides all device configuration with provided configuration
vyos.vyos.vyos_firewall_interfaces:
config:
- name: eth3
access_rules:
- afi: ipv4
rules:
- name: INBOUND
direction: out
state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before":[
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
# "commands": [
# "delete interfaces ethernet eth1 firewall",
# "delete interfaces ethernet eth3 firewall in name",
# "set interfaces ethernet eth3 firewall out name 'INBOUND'"
# ]
#
# "after": [
# {
# "name": "eth0"
# },
# {
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "out",
# "name": "INBOUND"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
#
# After state
# ------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth3 firewall 'in'
# set interfaces ethernet eth3 firewall 'local'
# set interfaces ethernet eth3 firewall out name 'INBOUND'
# Using deleted per interface name
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall in name 'INBOUND'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall local name 'LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth3 firewall local name 'LOCAL'
# set interfaces ethernet eth3 firewall out name 'OUTBOUND'
#
- name: Delete firewall interfaces based on interface name.
vyos.vyos.vyos_firewall_interfaces:
config:
- name: eth1
- name: eth3
state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "before": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
# "commands": [
# "delete interfaces ethernet eth1 firewall",
# "delete interfaces ethernet eth3 firewall"
# ]
#
# "after" : []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# Using deleted per afi
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall in name 'INBOUND'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall local name 'LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth3 firewall local name 'LOCAL'
# set interfaces ethernet eth3 firewall out name 'OUTBOUND'
#
- name: Delete firewall interfaces config per afi.
vyos.vyos.vyos_firewall_interfaces:
config:
- name: eth1
access_rules:
- afi: ipv4
- afi: ipv6
state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "commands": [
# "delete interfaces ethernet eth1 firewall in name",
# "delete interfaces ethernet eth1 firewall out name",
# "delete interfaces ethernet eth1 firewall local name",
# "delete interfaces ethernet eth1 firewall local ipv6-name"
# ]
#
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# Using deleted without config
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall in name 'INBOUND'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall local name 'LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth3 firewall local name 'LOCAL'
# set interfaces ethernet eth3 firewall out name 'OUTBOUND'
#
- name: Delete firewall interfaces config when empty config provided.
vyos.vyos.vyos_firewall_interfaces:
state: deleted
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "commands": [
# "delete interfaces ethernet eth1 firewall",
# "delete interfaces ethernet eth1 firewall"
# ]
#
# Using parsed
#
#
- name: Parse the provided configuration
vyos.vyos.vyos_firewall_interfaces:
running_config:
"set interfaces ethernet eth1 firewall in name 'INBOUND'
set interfaces ethernet eth1 firewall out name 'OUTBOUND'
set interfaces ethernet eth1 firewall local name 'LOCAL'
set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
set interfaces ethernet eth2 firewall in name 'INBOUND'
set interfaces ethernet eth2 firewall out name 'OUTBOUND'
set interfaces ethernet eth2 firewall local name 'LOCAL'
set interfaces ethernet eth2 firewall local ipv6-name 'V6-LOCAL'"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# },
# {
# "direction": "local",
# "name": "LOCAL"
# },
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth2"
# },
# {
# "name": "eth3"
# }
# ]
# Using gathered
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall 'in'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall 'local'
# set interfaces ethernet eth3 firewall 'out'
#
- name: Gather listed firewall interfaces.
vyos.vyos.vyos_firewall_interfaces:
state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "gathered": [
# {
# "name": "eth0"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "out",
# "name": "OUTBOUND"
# }
# ]
# },
# {
# "afi": "ipv6",
# "rules": [
# {
# "direction": "local",
# "name": "V6-LOCAL"
# }
# ]
# }
# ],
# "name": "eth1"
# },
# {
# "name": "eth2"
# },
# {
# "access_rules": [
# {
# "afi": "ipv4",
# "rules": [
# {
# "direction": "in",
# "name": "INBOUND"
# }
# ]
# }
# ],
# "name": "eth3"
# }
# ]
#
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name 'V6-LOCAL'
# set firewall name 'INBOUND'
# set firewall name 'LOCAL'
# set firewall name 'OUTBOUND'
# set interfaces ethernet eth1 firewall 'in'
# set interfaces ethernet eth1 firewall local ipv6-name 'V6-LOCAL'
# set interfaces ethernet eth1 firewall out name 'OUTBOUND'
# set interfaces ethernet eth3 firewall in name 'INBOUND'
# set interfaces ethernet eth3 firewall 'local'
# set interfaces ethernet eth3 firewall 'out'
# Using rendered
#
#
- name: Render the commands for provided configuration
vyos.vyos.vyos_firewall_interfaces:
config:
- name: eth2
access_rules:
- afi: ipv4
rules:
- name: INGRESS
direction: in
- name: OUTGRESS
direction: out
- name: DROP
direction: local
state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
# "set interfaces ethernet eth2 firewall in name 'INGRESS'",
# "set interfaces ethernet eth2 firewall out name 'OUTGRESS'",
# "set interfaces ethernet eth2 firewall local name 'DROP'",
# "set interfaces ethernet eth2 firewall local ipv6-name 'LOCAL'"
# ]
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration after module execution. Returned: when changed Sample: |
|
The configuration prior to the module execution. Returned: when state is Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is Sample: |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is Sample: |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is Sample: |