cisco.ios.ios_ospf_interfaces module – Resource module to configure OSPF interfaces.

Note

This module is part of the cisco.ios collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospf_interfaces.

New in cisco.ios 1.0.0

Synopsis

  • This module configures and manages the Open Shortest Path First (OSPF) version 2 on IOS platforms.

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of OSPF interfaces options.

address_family

list / elements=dictionary

OSPF interfaces settings on the interfaces in address-family context.

adjacency

boolean

Adjacency staggering

Choices:

  • false

  • true

afi

string / required

Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces.

Choices:

  • "ipv4"

  • "ipv6"

authentication

dictionary

Enable authentication

key_chain

string

Use a key-chain for cryptographic authentication keys

message_digest

boolean

Use message-digest authentication

Choices:

  • false

  • true

null

boolean

Use no authentication

Choices:

  • false

  • true

bfd

boolean

BFD configuration commands

Enable/Disable BFD on this interface

Choices:

  • false

  • true

cost

dictionary

Interface cost

dynamic_cost

dictionary

Specify dynamic cost options

Valid only with IPv6 OSPF config

default

integer

Specify default link metric value

hysteresis

dictionary

Specify hysteresis value for LSA dampening

percent

integer

Specify hysteresis percent changed. Please refer vendor documentation of Valid values.

threshold

integer

Specify hysteresis threshold value. Please refer vendor documentation of Valid values.

weight

dictionary

Specify weight to be placed on individual metrics

l2_factor

integer

Specify weight to be given to L2-factor metric

Percentage weight of L2-factor metric. Please refer vendor documentation of Valid values.

latency

integer

Specify weight to be given to latency metric.

Percentage weight of latency metric. Please refer vendor documentation of Valid values.

oc

boolean

Specify weight to be given to cdr/mdr for oc

Give 100 percent weightage for current data rate(0 for maxdatarate)

Choices:

  • false

  • true

resources

integer

Specify weight to be given to resources metric

Percentage weight of resources metric. Please refer vendor documentation of Valid values.

throughput

integer

Specify weight to be given to throughput metric

Percentage weight of throughput metric. Please refer vendor documentation of Valid values.

interface_cost

integer

Interface cost or Route cost of this interface

database_filter

boolean

Filter OSPF LSA during synchronization and flooding

Choices:

  • false

  • true

dead_interval

dictionary

Interval after which a neighbor is declared dead

minimal

integer

Set to 1 second and set multiplier for Hellos

Number of Hellos sent within 1 second. Please refer vendor documentation of Valid values.

Valid only with IP OSPF config

time

integer

time in seconds

demand_circuit

dictionary

OSPF Demand Circuit, enable or disable the demand circuit’

disable

boolean

Disable demand circuit on this interface

Valid only with IPv6 OSPF config

Choices:

  • false

  • true

enable

boolean

Enable Demand Circuit

Choices:

  • false

  • true

ignore

boolean

Ignore demand circuit auto-negotiation requests

Choices:

  • false

  • true

flood_reduction

boolean

OSPF Flood Reduction

Choices:

  • false

  • true

hello_interval

integer

Time between HELLO packets

Please refer vendor documentation of Valid values.

lls

boolean

Link-local Signaling (LLS) support

Valid only with IP OSPF config

Choices:

  • false

  • true

manet

dictionary

Mobile Adhoc Networking options

MANET Peering options

Valid only with IPv6 OSPF config

cost

dictionary

Redundant path cost improvement required to peer

percent

integer

Relative incremental path cost. Please refer vendor documentation of Valid values.

threshold

integer

Absolute incremental path cost. Please refer vendor documentation of Valid values.

dictionary

Redundant path cost improvement required to peer

integer

Minimum link cost threshold. Please refer vendor documentation of Valid values.

boolean

Enable link-metrics

Choices:

  • false

  • true

mtu_ignore

boolean

Ignores the MTU in DBD packets

Choices:

  • false

  • true

multi_area

dictionary

Set the OSPF multi-area ID

Valid only with IP OSPF config

cost

integer

Interface cost

id

integer

OSPF multi-area ID as a decimal value. Please refer vendor documentation of Valid values.

OSPF multi-area ID in IP address format(e.g. A.B.C.D)

neighbor

dictionary

OSPF neighbor link-local IPv6 address (X:X:X:X::X)

Valid only with IPv6 OSPF config

address

string

Neighbor link-local IPv6 address

cost

integer

OSPF cost for point-to-multipoint neighbor

database_filter

boolean

Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor

Choices:

  • false

  • true

poll_interval

integer

OSPF dead-router polling interval

priority

integer

OSPF priority of non-broadcast neighbor

network

dictionary

Network type

broadcast

boolean

Specify OSPF broadcast multi-access network

Choices:

  • false

  • true

manet

boolean

Specify MANET OSPF interface type

Valid only with IPv6 OSPF config

Choices:

  • false

  • true

non_broadcast

boolean

Specify OSPF NBMA network

Choices:

  • false

  • true

point_to_multipoint

boolean

Specify OSPF point-to-multipoint network

Choices:

  • false

  • true

point_to_point

boolean

Specify OSPF point-to-point network

Choices:

  • false

  • true

prefix_suppression

boolean

Enable/Disable OSPF prefix suppression

Choices:

  • false

  • true

priority

integer

Router priority. Please refer vendor documentation of Valid values.

process

dictionary

OSPF interfaces process config

area_id

string

OSPF interfaces area ID as a decimal value. Please refer vendor documentation of Valid values.

OSPF interfaces area ID in IP address format(e.g. A.B.C.D)

id

integer

Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces. Please refer vendor documentation of Valid values.

instance_id

integer

Set the OSPF instance based on ID

Valid only with IPv6 OSPF config

secondaries

boolean

Include or exclude secondary IP addresses.

Valid only with IPv4 config

Choices:

  • false

  • true

resync_timeout

integer

Interval after which adjacency is reset if oob-resync is not started. Please refer vendor documentation of Valid values.

retransmit_interval

integer

Time between retransmitting lost link state advertisements. Please refer vendor documentation of Valid values.

shutdown

boolean

Set OSPF protocol’s state to disable under current interface

Choices:

  • false

  • true

transmit_delay

integer

Link state transmit delay. Please refer vendor documentation of Valid values.

ttl_security

dictionary

TTL security check

Valid only with IPV4 OSPF config

hops

integer

Maximum number of IP hops allowed

Please refer vendor documentation of Valid values.

set

boolean

Enable TTL Security on all interfaces

Choices:

  • false

  • true

name

string / required

Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^interface.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | section ^interface executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

Examples

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

- name: Delete provided OSPF Interface config
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
    state: deleted

# Task Output:
# ------------

# before:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv6
#       priority: 20
#       process:
#         area_id: '105'
#         id: 55
#       transmit_delay: 30
#     name: GigabitEthernet0/1
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       cost:
#         interface_cost: 30
#       priority: 40
#       process:
#         area_id: '20'
#         id: 10
#       ttl_security:
#         hops: 50
#         set: true
#     name: GigabitEthernet0/2
#
# commands:
# - interface GigabitEthernet0/1
# - no ipv6 ospf 55 area 105
# - no ipv6 ospf adjacency stagger disable
# - no ipv6 ospf priority 20
# - no ipv6 ospf transmit-delay 30
#
# after:
#   - name: GigabitEthernet0/0
#   - name: GigabitEthernet0/1
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       cost:
#         interface_cost: 30
#       priority: 40
#       process:
#         area_id: '20'
#         id: 10
#       ttl_security:
#         hops: 50
#         set: true
#     name: GigabitEthernet0/2
#
# After state:
# ------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

# Using deleted without any config passed (NOTE: This will delete all OSPF Interfaces configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

- name: Delete all OSPF config from interfaces
  cisco.ios.ios_ospf_interfaces:
    state: deleted

# Task Output:
# ------------

# before:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv6
#       priority: 20
#       process:
#         area_id: '105'
#         id: 55
#       transmit_delay: 30
#     name: GigabitEthernet0/1
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       cost:
#         interface_cost: 30
#       priority: 40
#       process:
#         area_id: '20'
#         id: 10
#       ttl_security:
#         hops: 50
#         set: true
#     name: GigabitEthernet0/2
#
# commands:
# - interface GigabitEthernet0/2
# - no ip ospf 10 area 20
# - no ip ospf adjacency stagger disable
# - no ip ospf cost 30
# - no ip ospf priority 40
# - no ip ospf ttl-security hops 50
# - interface GigabitEthernet0/1
# - no ipv6 ospf 55 area 105
# - no ipv6 ospf adjacency stagger disable
# - no ipv6 ospf priority 20
# - no ipv6 ospf transmit-delay 30
#
# after:
#   - name: GigabitEthernet0/0
#   - name: GigabitEthernet0/1
#   - name: GigabitEthernet0/2

# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# router-ios#

- name: Merge provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 30
            adjacency: true
            bfd: true
            cost:
              interface_cost: 5
            dead_interval:
              time: 5
            demand_circuit:
              ignore: true
            network:
              broadcast: true
            priority: 25
            resync_timeout: 10
            shutdown: true
            ttl_security:
              hops: 50
          - afi: ipv6
            process:
              id: 35
              area_id: 45
            adjacency: true
            database_filter: true
            manet:
              link_metrics:
                cost_threshold: 10
            priority: 55
            transmit_delay: 45
    state: merged

# Task Output:
# ------------
# before: []
#
# commands:
# - interface GigabitEthernet0/1
# - ip ospf 10 area 30
# - ip ospf adjacency stagger disable
# - ip ospf bfd
# - ip ospf cost 5
# - ip ospf dead-interval 5
# - ip ospf demand-circuit ignore
# - ip ospf network broadcast
# - ip ospf priority 25
# - ip ospf resync-timeout 10
# - ip ospf shutdown
# - ip ospf ttl-security hops 50
# - ipv6 ospf 35 area 45
# - ipv6 ospf adjacency stagger disable
# - ipv6 ospf database-filter all out
# - ipv6 ospf manet peering link-metrics 10
# - ipv6 ospf priority 55
# - ipv6 ospf transmit-delay 45
#
# after:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - name: GigabitEthernet0/2

# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Override running config with provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv6
            process:
              id: 55
              area_id: 105
            adjacency: true
            priority: 20
            transmit_delay: 30
      - name: GigabitEthernet0/2
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 20
            adjacency: true
            cost:
              interface_cost: 30
            priority: 40
            ttl_security:
              hops: 50
    state: overridden

# Task Output:
# ------------
#
# before:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - name: GigabitEthernet0/2
#
# commands:
# - interface GigabitEthernet0/2
# - ip ospf 10 area 20
# - ip ospf adjacency stagger disable
# - ip ospf cost 30
# - ip ospf priority 40
# - ip ospf ttl-security hops 50
# - interface GigabitEthernet0/1
# - ipv6 ospf 55 area 105
# - no ipv6 ospf database-filter all out
# - no ipv6 ospf manet peering link-metrics 10
# - ipv6 ospf priority 20
# - ipv6 ospf transmit-delay 30
# - no ip ospf 10 area 30
# - no ip ospf adjacency stagger disable
# - no ip ospf bfd
# - no ip ospf cost 5
# - no ip ospf dead-interval 5
# - no ip ospf demand-circuit ignore
# - no ip ospf network broadcast
# - no ip ospf priority 25
# - no ip ospf resync-timeout 10
# - no ip ospf shutdown
# - no ip ospf ttl-security hops 50
#
# parsed:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv6
#       priority: 20
#       process:
#         area_id: '105'
#         id: 55
#       transmit_delay: 30
#     name: GigabitEthernet0/1
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       cost:
#         interface_cost: 30
#       priority: 40
#       process:
#         area_id: '20'
#         id: 10
#       ttl_security:
#         hops: 50
#         set: true
#     name: GigabitEthernet0/2
#
# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Replaced provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/2
        address_family:
          - afi: ipv6
            process:
              id: 55
              area_id: 105
            adjacency: true
            priority: 20
            transmit_delay: 30
    state: replaced

# Task Output:
# ------------
#
# before:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - name: GigabitEthernet0/2
#
# commands:
# - interface GigabitEthernet0/2
# - ipv6 ospf 55 area 105
# - ipv6 ospf adjacency stagger disable
# - ipv6 ospf priority 20
# - ipv6 ospf transmit-delay 30
#
# after:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - address_family:
#     - adjacency: true
#       afi: ipv6
#       priority: 20
#       process:
#         area_id: '105'
#         id: 55
#       transmit_delay: 30
#     name: GigabitEthernet0/2

# After state:
# ------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Gather OSPF Interfaces provided configurations
  cisco.ios.ios_ospf_interfaces:
    config:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#   - name: GigabitEthernet0/0
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - name: GigabitEthernet0/2

# After state:
# ------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 30
            adjacency: true
            bfd: true
            cost:
              interface_cost: 5
            dead_interval:
              time: 5
            demand_circuit:
              ignore: true
            network:
              broadcast: true
            priority: 25
            resync_timeout: 10
            shutdown: true
            ttl_security:
              hops: 50
          - afi: ipv6
            process:
              id: 35
              area_id: 45
            adjacency: true
            database_filter: true
            manet:
              link_metrics:
                cost_threshold: 10
            priority: 55
            transmit_delay: 45
    state: rendered

# Task Output:
# ------------
#
# rendered:
# - interface GigabitEthernet0/1
# - ip ospf 10 area 30
# - ip ospf adjacency stagger disable
# - ip ospf bfd
# - ip ospf cost 5
# - ip ospf dead-interval 5
# - ip ospf demand-circuit ignore
# - ip ospf network broadcast
# - ip ospf priority 25
# - ip ospf resync-timeout 10
# - ip ospf shutdown
# - ip ospf ttl-security hops 50
# - ipv6 ospf 35 area 45
# - ipv6 ospf adjacency stagger disable
# - ipv6 ospf database-filter all out
# - ipv6 ospf manet peering link-metrics 10
# - ipv6 ospf priority 55
# - ipv6 ospf transmit-delay 45
#

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/2
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/0

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospf_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------
#
# parsed:
#   - name: GigabitEthernet0/2
#   - address_family:
#     - adjacency: true
#       afi: ipv4
#       bfd: true
#       cost:
#         interface_cost: 5
#       dead_interval:
#         time: 5
#       demand_circuit:
#         enable: true
#         ignore: true
#       network:
#         broadcast: true
#       priority: 25
#       process:
#         area_id: '30'
#         id: 10
#       resync_timeout: 10
#       shutdown: true
#       ttl_security:
#         hops: 50
#         set: true
#     - adjacency: true
#       afi: ipv6
#       database_filter: true
#       manet:
#         link_metrics:
#           cost_threshold: 10
#       priority: 55
#       process:
#         area_id: '45'
#         id: 35
#       transmit_delay: 45
#     name: GigabitEthernet0/1
#   - name: GigabitEthernet0/0

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration after module execution.

Returned: when changed

Sample: ["This output will always be in the same format as the module argspec.\n"]

before

list / elements=string

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["This output will always be in the same format as the module argspec.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["interface GigabitEthernet2", "ip ospf priority 40", "ip ospf adjacency stagger disable"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["interface GigabitEthernet2", "ip ospf priority 40", "ip ospf adjacency stagger disable"]

Authors

  • Sagar Paul (@KB-perByte)

  • Sumit Jaiswal (@justjais)