arista.eos.eos_ospfv2 module – OSPFv2 resource module

Note

This module is part of the arista.eos collection (version 9.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospfv2.

New in arista.eos 1.0.0

Synopsis

• This module configures and manages the attributes of ospfv2 on Arista EOS platforms.

Aliases: ospfv2

Parameters

Parameter	Comments
config dictionary	A list of configurations for ospfv2.
processes list / elements=dictionary	A list of dictionary specifying the ospfv2 processes.
adjacency dictionary	Configure adjacency options for OSPF instance.
exchange_start dictionary	Configure exchange-start options for OSPF instance.
threshold integer	Number of peers to bring up simultaneously.
areas list / elements=dictionary	Specifies the configuration for OSPF areas
area_id string	Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
default_cost integer	Specify the cost for default summary route in stub/NSSA area.
filter dictionary	Specify the filter for incoming summary LSAs.
address string	IP address.
prefix_list string	Specify list to filter for incoming LSAs.
subnet_address string	IP address with mask length
subnet_mask string	IP subnet mask
not_so_stubby dictionary	Configures NSSA parameters.
default_information_originate dictionary	Originate default Type 7 LSA.
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
nssa_only boolean	Limit default advertisement to this NSSA area. Choices: false true
lsa boolean	lsa parameters Choices: false true
no_summary boolean	Filter all type-3 LSAs in the nssa area. Choices: false true
nssa_only boolean	Disable Type-7 LSA p-bit setting Choices: false true
set boolean	Set config up to not-so-stubby Choices: false true
nssa dictionary	Configures NSSA parameters.
default_information_originate dictionary	Originate default Type 7 LSA.
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
nssa_only boolean	Limit default advertisement to this NSSA area. Choices: false true
no_summary boolean	Filter all type-3 LSAs in the nssa area. Choices: false true
nssa_only boolean	Disable Type-7 LSA p-bit setting Choices: false true
set boolean	Set config up to nssa Choices: false true
range dictionary	Configure route summarization.
address string	IP address.
advertise boolean	Enable Advertisement of the range. Choices: false true
cost integer	Configures the metric.
subnet_address string	IP address with mask length
subnet_mask string	IP subnet mask
stub dictionary	Stub area.
no_summary boolean	If False , Filter all type-3 LSAs in the stub area. Choices: false true
set boolean	When true sets the stub config alone. Choices: false true
auto_cost dictionary	Set auto-cost.
reference_bandwidth integer	reference bandwidth in megabits per sec.
bfd dictionary	Enable BFD.
all_interfaces boolean	Enable BFD on all interfaces. Choices: false true
default_information dictionary	Control distribution of default information.
always boolean	Always advertise default route. Choices: false true
metric integer	Metric for default route.
metric_type integer	Metric type for default route.
originate boolean	Distribute a default route. Choices: false true
route_map string	Specify which route-map to use.
default_metric integer	Configure the default metric for redistributed routes
distance dictionary	Specifies the administrative distance for routes.
external integer	Routes external to the area
inter_area integer	Routes from other areas
intra_area integer	Routes with in an area
distribute_list dictionary	Specifies the list of routes to be filtered.
prefix_list string	prefix list to be filtered
route_map string	route map to be filtered
dn_bit_ignore boolean	If true, Disable dn-bit check for Type-3 LSAs in non-default VRFs. Choices: false true
fips_restrictions string	Use FIPS compliant algorithms
graceful_restart dictionary	Enable graceful restart mode.
grace_period integer	Specify maximum time to wait for graceful-restart to complete.
set boolean	When true sets the grace_fulrestart config alone. Choices: false true
graceful_restart_helper boolean	If true, Enable graceful restart helper. Choices: false true
log_adjacency_changes dictionary	To configure link-state changes and transitions of OSPFv2 neighbors.
detail boolean	If true , configures the switch to log all link-state changes. Choices: false true
max_lsa dictionary	Specifies the switch behavior on reaching max lsa count.
count integer	maximum count of lsas.
ignore_count integer	No. of times the switch can shut down temporarily on warning
ignore_time integer	time in minutes, for which the switch shoud be shutdown on max-lsa warning
reset_time integer	Time in minutes, after which the shutdown counter resets.
threshold integer	percentage of <count> , when a warning should be raised.
warning boolean	Only give warning message when limit is exceeded Choices: false true
max_metric dictionary	Set maximum metric.
router_lsa dictionary	Maximum metric in self-originated router-LSAs.
external_lsa dictionary	Override external-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
include_stub boolean	Set maximum metric for stub links in router-LSAs. Choices: false true
on_startup dictionary	Set maximum metric temporarily after reboot.
wait_period integer	Wait period in seconds after startup.
set boolean	Set router-lsa attribute. Choices: false true
summary_lsa dictionary	Override summary-lsa metric with max-metric value.
max_metric_value integer	Set max metric value for external LSAs.
set boolean	Set external-lsa attribute. Choices: false true
maximum_paths integer	Maximum number of next-hops in an ECMP route.
mpls_ldp boolean	mpls ldp sync configuration. Choices: false true
networks list / elements=dictionary	Configure routing for a network.
area string	Configure OSPF area.
mask string	Network Wildcard Mask.
network_address string	Network Address.
prefix string	Prefix.
passive_interface dictionary	Include interface but without actively running OSPF.
default boolean	If true, Set all interfaces to passive by default Choices: false true
interface_list string	Interface range.
point_to_point boolean	Configure Point-to-point specific features. Choices: false true
process_id integer	ID of OSPFV2 process.
redistribute list / elements=dictionary	Specifies the routes to be redistributed
isis_level string	ISIS levels.
route_map string	Specify which route map to use.
routes string	Route types (BGP,isis,connected etc)
retransmission_threshold integer	Configure threshold for retransmission.
rfc1583compatibility boolean	Specifies different methods for calculating summary route metrics. Choices: false true
router_id string	32-bit number assigned to a router running OSPFv2.
shutdown boolean	Disable the OSPF instance. Choices: false true
summary_address dictionary	Summary route configuration.
address string	IP summary address.
attribute_map string	Set attributes of summary route.
mask string	Summary Mask.
not_advertise boolean	Do not advertise summary route. Choices: false true
prefix string	Prefix.
tag integer	Set tag.
timers list / elements=dictionary	Configure OSPF timers.
lsa dictionary	Configure OSPF LSA timers.
rx dictionary	Configure OSPF LSA receiving timers
min_interval integer	Configure OSPF LSA arrival timer.
tx dictionary	Configure OSPF LSA transmission timers.
delay dictionary	Configure OSPF LSA transmission delay.
initial integer	Delay to generate first occurrence of LSA in msecs.
max integer	Maximum delay between originating the same LSA in msecs.
min integer	Min delay between originating the same LSA in msecs.
out_delay integer	Configure out-delay timer.
pacing integer	Configure OSPF packet pacing.
spf dictionary	Configure SPF timers
initial integer	Initial SPF schedule delay in msecs.
max integer	Max wait time between two SPFs in msecs.
min integer	Min Hold time between two SPFs in msecs
seconds integer	Seconds.
throttle dictionary	Configure throttle timers(valid only for eos version < 4.23).
attr string	throttle attribute.
initial integer	Initial schedule delay in msecs.
max integer	Max wait time
min integer	Min Hold time
traffic_engineering boolean	Enter traffic engineering config mode Choices: false true
vrf string	VRF name .
running_config string	This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section ospf. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: "deleted" "merged" ← (default) "overridden" "replaced" "gathered" "rendered" "parsed"

Notes

Note

• Tested against Arista EOS 4.24.6F

• This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state:
# -------------
# localhost#show running-config | section ospf
# localhost#

- name: Merge provided config into running config
  arista.eos.eos_ospfv2:
    config:
      - processes:
          - process_id: 1
            adjacency:
              exchange_start:
                threshold: 20045623
            areas:
              - filter:
                  address: "10.1.1.0/24"
                id: "0.0.0.2"
              - id: "0.0.0.50"
                range:
                  address: "172.20.0.0/16"
                  cost: 34
            default_information:
              metric: 100
              metric_type: 1
              originate: true
            distance:
              intra_area: 85
            max_lsa:
              count: 8000
              ignore_count: 3
              ignore_time: 6
              reset_time: 20
              threshold: 40
            networks:
              - area: "0.0.0.0"
                prefix: 10.10.2.0/24
              - area: "0.0.0.0"
                prefix: "10.10.3.0/24"
            redistribute:
              - routes: "static"
            router_id: "170.21.0.4"
          - process_id: 2
            vrf: "vrf01"
            areas:
              - id: "0.0.0.9"
                default_cost: 20
            max_lsa:
              count: 8000
              ignore_count: 3
              ignore_time: 6
              reset_time: 20
              threshold: 40
            networks:
              - area: "0.0.0.0"
                prefix: 10.10.2.0/24
              - area: "0.0.0.0"
                prefix: "10.10.3.0/24"
            redistribute:
              - routes: "static"
            router_id: "170.21.0.4"
          - process_id: 2
            vrf: "vrf01"
            areas:
              - id: "0.0.0.9"
                default_cost: 20
            max_lsa:
              count: 8000
              ignore_count: 3
              ignore_time: 6
              reset_time: 20
              threshold: 40
          - process_id: 3
            vrf: "vrf02"
            redistribute:
              - routes: "connected"

# Task output:
# ------------
#  before: {}

# commands
# - router ospf 1
# - adjacency exchange-start threshold 20045623
# - area 0.0.0.2 filter 10.1.1.0/24
# - area 0.0.0.50  range 172.20.0.0/16 cost 34
# - default-information originate metric 100 metric-type 1
# - distance ospf intra-area 85
# - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
# - network 10.10.2.0/24 area 0.0.0.0
# - network 10.10.3.0/24 area 0.0.0.0
# - redistribute static
# - router-id 170.21.0.4
# - exit
# - router ospf 2 vrf vrf01
# - area 0.0.0.9 default-cost 20
# - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
# - network 10.10.2.0/24 area 0.0.0.0
# - network 10.10.3.0/24 area 0.0.0.0
# - redistribute static
# - router-id 170.21.0.4
# - exit
# - router ospf 2 vrf vrf01
# - area 0.0.0.9 default-cost 20
# - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
# - exit
# - router ospf 3 vrf vrf02
# - redistribute connected
# - exit
#
# after:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02

# After state:
# ------------
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
#
# router ospf 2 vrf vrf01
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000

# Using replaced

# Before State:
# -------------
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
#
- name: replace Ospf configs
  arista.eos.eos_ospfv2:
    config:
      - processes:
          - process_id: 2
            vrf: "vrf01"
            point_to_point: true
            redistribute:
              - routes: "isis"
                isis_level: "level-1"
    state: replaced

# Task output:
# ------------
# before:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02
#
# commands:
# - router ospf 2 vrf vrf01
# - no area 0.0.0.9 default-cost 20
# - no max-lsa  8000 40 ignore-time 6  ignore-count 3  reset-time 20
# - point-to-point routes
# - redistribute isis level-1
#
# after:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - max_lsa:
#         count: 12000
#       process_id: 2
#       redistribute:
#       - isis_level: level-1
#         routes: isis
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02

# After state:
# ------------
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    redistribute isis level-1
#    max-lsa 12000
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000

# Using overridden

# Before state:
# -------------
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    redistribute isis level-1
#    max-lsa 12000
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000

- name: override running config with provided config
  arista.eos.eos_ospfv2:
    config:
      - processes:
          - process_id: 2
            vrf: "vrf01"
            redistribute:
              - routes: "connected"
    state: overriden

# Task output:
# ------------

# before:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - max_lsa:
#         count: 12000
#       process_id: 2
#       redistribute:
#       - isis_level: level-1
#         routes: isis
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02
#
# commands:
# - no router ospf 1
# - no router ospf 3
# - router ospf 2 vrf vrf01
# - no max-lsa  12000
# - no redistribute isis level-1
# - redistribute connected
#
# after:
#     processes:
#     - max_lsa:
#         count: 12000
#       process_id: 2
#       redistribute:
#       - isis_level: level-1
#         routes: isis
#       vrf: vrf01

# After state:
# ------------
# localhost#show running-config | section ospf
# router ospf 2 vrf vrf01
#    redistribute isis level-1
#    max-lsa 12000
# !

# Using deleted

# Before state:
# -------------
# localhost#show running-config | section ospf
# router ospf 1
#    router-id 170.21.0.4
#    distance ospf intra-area 85
#    redistribute static
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50 range 172.20.0.0/16 cost 34
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
#    adjacency exchange-start threshold 20045623
#    default-information originate metric 100 metric-type 1
# !
# router ospf 2 vrf vrf01
#    redistribute connected
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000
#
- name: Delete OSPF config
  arista.eos.eos_ospfv2:
    config:
      processes:
        - process_id: 1
    state: deleted

# Task output:
# ------------
# before:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       redistribute:
#       - routes: connected
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02
#
# commands:
# - no router ospf 1
#
# after:
#     processes:
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       redistribute:
#       - routes: connected
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02

# After state:
# ------------
# localhost#show running-config | section ospf
# router ospf 2 vrf vrf01
#    redistribute connected
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000

# Using gathered
# localhost#show running-config | section ospf
# router ospf 2 vrf vrf01
#    redistribute connected
#    area 0.0.0.9 default-cost 20
#    max-lsa 8000 40 ignore-time 6 ignore-count 3 reset-time 20
# !
# router ospf 3 vrf vrf02
#    redistribute connected
#    max-lsa 12000

- name: replace Ospf configs
  arista.eos.eos_ospfv2:
    state: gathered

# Task output:
# ------------
# gathered:
#     processes:
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 8000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       redistribute:
#       - routes: connected
#       vrf: vrf01
#     - max_lsa:
#         count: 12000
#       process_id: 3
#       redistribute:
#       - routes: connected
#       vrf: vrf02

# Using parsed
# ------------

# parsed.cfg
# router ospf 1
#    adjacency exchange-start threshold 20045623
#    area 0.0.0.2 filter 10.1.1.0/24
#    area 0.0.0.50  range 172.20.0.0/16 cost 34
#    default-information originate  metric 100 metric-type 1
#    distance ospf intra-area 85
#    max-lsa  80000 40 ignore-count 3  ignore-time 6  reset-time 20
#    network 10.10.2.0/24 area 0.0.0.0
#    network 10.10.3.0/24 area 0.0.0.0
#    redistribute static
#    router-id 170.21.0.4
# router ospf 2 vrf vrf01,
#    area 0.0.0.9 default-cost 20
#    max-lsa  80000 40 ignore-count 3  ignore-time 6  reset-time 20
# router ospf 3 vrf vrf02
#    redistribute static

- name: Parse running config and display structured facts
  arista.eos.eos_ospfv2:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
# parsed:
#     processes:
#     - adjacency:
#         exchange_start:
#           threshold: 20045623
#       areas:
#       - area_id: 0.0.0.2
#         filter:
#           address: 10.1.1.0/24
#       - area_id: 0.0.0.50
#         range:
#           address: 172.20.0.0/16
#           cost: 34
#       default_information:
#         metric: 100
#         metric_type: 1
#         originate: true
#       distance:
#         intra_area: 85
#       max_lsa:
#         count: 80000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       networks:
#       - area: 0.0.0.0
#         prefix: 10.10.2.0/24
#       - area: 0.0.0.0
#         prefix: 10.10.3.0/24
#       process_id: 1
#       redistribute:
#       - routes: static
#       router_id: 170.21.0.4
#     - areas:
#       - area_id: 0.0.0.9
#         default_cost: 20
#       max_lsa:
#         count: 80000
#         ignore_count: 3
#         ignore_time: 6
#         reset_time: 20
#         threshold: 40
#       process_id: 2
#       vrf: vrf01,
#     - process_id: 3
#       redistribute:
#       - routes: static
#       vrf: vrf02

# Using rendered

- name: replace Ospf configs
  arista.eos.eos_ospfv2:
    config:
      processes:
        - process_id: 1
          adjacency:
            exchange_start:
              threshold: 20045623
          areas:
            - filter:
                address: "10.1.1.0/24"
              area_id: "0.0.0.2"
            - area_id: "0.0.0.50"
              range:
                address: "172.20.0.0/16"
                cost: 34
          default_information:
            metric: 100
            metric_type: 1
            originate: true
          distance:
            intra_area: 85
          max_lsa:
            count: 8000
            ignore_count: 3
            ignore_time: 6
            reset_time: 20
            threshold: 40
          networks:
            - area: "0.0.0.0"
              prefix: 10.10.2.0/24
            - area: "0.0.0.0"
              prefix: "10.10.3.0/24"
          redistribute:
            - routes: "static"
          router_id: "170.21.0.4"
        - process_id: 2
          vrf: "vrf01"
          areas:
            - area_id: "0.0.0.9"
              default_cost: 20
          max_lsa:
            count: 8000
            ignore_count: 3
            ignore_time: 6
            reset_time: 20
            threshold: 40
          networks:
            - area: "0.0.0.0"
              prefix: 10.10.2.0/24
            - area: "0.0.0.0"
              prefix: "10.10.3.0/24"
          redistribute:
            - routes: "static"
          router_id: "170.21.0.4"
        - process_id: 2
          vrf: "vrf01"
          areas:
            - area_id: "0.0.0.9"
              default_cost: 20
          max_lsa:
            count: 8000
            ignore_count: 3
            ignore_time: 6
            reset_time: 20
            threshold: 40
        - process_id: 3
          vrf: "vrf02"
          redistribute:
            - routes: "connected"
    state: rendered

# rendered:
#   - router ospf 1
#   - adjacency exchange-start threshold 20045623
#   - area 0.0.0.2 filter 10.1.1.0/24
#   - area 0.0.0.50  range 172.20.0.0/16 cost 34
#   - default-information originate metric 100 metric-type 1
#   - distance ospf intra-area 85
#   - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
#   - network 10.10.2.0/24 area 0.0.0.0
#   - network 10.10.3.0/24 area 0.0.0.0
#   - redistribute static
#   - router-id 170.21.0.4
#   - exit
#   - router ospf 2 vrf vrf01
#   - area 0.0.0.9 default-cost 20
#   - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
#   - network 10.10.2.0/24 area 0.0.0.0
#   - network 10.10.3.0/24 area 0.0.0.0
#   - redistribute static
#   - router-id 170.21.0.4
#   - exit
#   - router ospf 2 vrf vrf01
#   - area 0.0.0.9 default-cost 20
#   - max-lsa  8000 40 ignore-count 3  ignore-time 6  reset-time 20
#   - exit
#   - router ospf 3 vrf vrf02
#   - redistribute connected
#   - exit

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: "This output will always be in the same format as the module argspec.\n"
before dictionary	The configuration prior to the module execution. Returned: when state is merged, replaced, overridden, deleted or purged Sample: "This output will always be in the same format as the module argspec.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is merged, replaced, overridden, deleted or purged Sample: ["router ospf 1", "adjacency exchange-start threshold 20045623", "area 0.0.0.2 filter 10.1.1.0/24"]
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: "This output will always be in the same format as the module argspec.\n"
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: "This output will always be in the same format as the module argspec.\n"
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: ["router ospf 1", "adjacency exchange-start threshold 20045623", "area 0.0.0.2 filter 10.1.1.0/24"]

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)

Collection links

• Issue Tracker
• Repository (Sources)