cisco.aci.aci_access_switch_policy_group module – Manage Access Switch Policy Groups (infra:AccNodePGrp and infra:SpineAccNodePGrp).
Note
This module is part of the cisco.aci collection (version 2.10.1).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.aci
.
To use it in a playbook, specify: cisco.aci.aci_access_switch_policy_group
.
Synopsis
Manage Access Switch Policy Groups on Cisco ACI fabrics.
Parameters
Parameter |
Comments |
---|---|
User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable If the value is not specified in the task and environment variable Default: |
|
The BFD IPv4 policy bound to the access switch policy group. The APIC defaults to |
|
The BFD IPv6 policy bound to the access switch policy group. The APIC defaults to |
|
The BFD multihop IPv4 policy bound to the access switch policy group. Only available in APIC version 5.x or later. Only available when switch_type=leaf. The APIC defaults to |
|
The BFD multihop IPv6 policy bound to the access switch policy group. Only available in APIC version 5.x or later. Only available when switch_type=leaf. The APIC defaults to |
|
The CDP policy bound to the access switch policy group. The APIC defaults to |
|
The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a If PEM-formatted content was provided for If the value is not specified in the task, the value of environment variable |
|
The CoPP policy bound to the access switch policy group. The APIC defaults to |
|
The CoPP pre-filter policy bound to the access switch policy group. The APIC defaults to |
|
The description of the access switch policy group. |
|
The equipment flash policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The fast link failover policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The fibre channel node policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The fibre channel SAN policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The forward scale profile policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable |
|
The LLDP policy bound to the access switch policy group. The APIC defaults to |
|
The monitoring policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The name of the access switch policy group. |
|
The netflow node policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
The 802.1x node authentication policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
Influence the output of this ACI module.
If the value is not specified in the task, the value of environment variable Choices:
|
|
Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable |
|
User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable |
|
User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable |
|
The password to use for authentication. This option is mutual exclusive with If the value is not specified in the task, the value of environment variables |
|
The PoE node policy bound to the access switch policy group. Only available when switch_type=leaf. The APIC defaults to |
|
Port number to be used for REST connection. The default value depends on parameter If the value is not specified in the task, the value of environment variable |
|
Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default This option is mutual exclusive with If the value is not specified in the task, the value of environment variable |
|
The PTP node policy bound to the access switch policy group. Only available in APIC version 5.2 or later. Only available when switch_type=leaf. The APIC defaults to |
|
The spanning tree policy bound to the access switch policy group. Only available in APIC version 5.2 or later. Only available when switch_type=leaf. The APIC defaults to |
|
Use Use Choices:
|
|
If If the value is not specified in the task, the value of environment variable The default value is WARNING - This causes the previous return value to be empty. The previous state of the object will not be checked and the POST update will contain all properties. Choices:
|
|
If If the value is not specified in the task, the value of environment variable The default value is WARNING - This causes the current return value to be set to the proposed value. The current object including default values will be unverifiable in a single task. Choices:
|
|
Whether this is a leaf or spine policy group Choices:
|
|
The SyncE node policy bound to the access switch policy group. Only available in APIC version 5.x or later. Only available when switch_type=leaf. The APIC defaults to |
|
The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable The default value is 30. |
|
The USB configuration policy bound to the access switch policy group. Only available in APIC version 5.2 or later. The APIC defaults to |
|
If If the value is not specified in the task, the value of environment variable The default value is true. Choices:
|
|
If If the value is not specified in the task, the value of environment variable The default value is true when the connection is local. Choices:
|
|
The username to use for authentication. If the value is not specified in the task, the value of environment variables The default value is admin. |
|
If This should only set to If the value is not specified in the task, the value of environment variable The default value is true. Choices:
|
See Also
See also
- APIC Management Information Model reference
More information about the internal APIC class infra:AccNodePGrp and infra:SpineAccNodePGrp.
- Cisco ACI Guide
Detailed information on how to manage your ACI infrastructure using Ansible.
- Developing Cisco ACI modules
Detailed guide on how to write your own Cisco ACI modules to contribute.
Examples
- name: Create Leaf Access Switch Policy Group
cisco.aci.aci_access_switch_policy_group:
host: apic
username: admin
password: SomeSecretPassword
name: ansible_pol_grp_spine
switch_type: leaf
spanning_tree_policy: example_spanning_tree_policy
bfd_ipv4_policy: example_bfd_ipv4_policy
bfd_ipv6_policy: example_bfd_ipv6_policy
fibre_channel_node_policy: example_fibre_channel_node_policy
poe_node_policy: example_poe_node_policy
fibre_channel_san_policy: example_fibre_channel_san_policy
monitoring_policy: example_monitoring_policy
copp_policy: example_copp_policy
forward_scale_profile_policy: example_forward_scale_profile_policy
fast_link_failover_policy: example_fast_link_failover_policy
node_802_1x_authentication_policy: example_node_802_1x_authentication_policy
copp_pre_filter_policy: example_copp_pre_filter_policy
equipment_flash_policy: example_equipment_flash_policy
cdp_policy: example_cdp_policy
lldp_policy: example_lldp_policy
state: present
delegate_to: localhost
- name: Create Spine Access Switch Policy Group
cisco.aci.aci_access_switch_policy_group:
host: apic
username: admin
password: SomeSecretPassword
name: ansible_pol_grp_leaf
switch_type: spine
bfd_ipv4_policy: example_bfd_ipv4_policy
bfd_ipv6_policy: example_bfd_ipv6_policy
copp_policy: example_copp_policy
copp_pre_filter_policy: example_copp_pre_filter_policy
cdp_policy: example_cdp_policy
lldp_policy: example_lldp_policy
state: present
delegate_to: localhost
- name: Delete Leaf Access Switch Policy Group
cisco.aci.aci_access_switch_policy_group:
host: apic
username: admin
password: SomeSecretPassword
name: ansible_pol_grp_leaf
switch_type: leaf
state: absent
delegate_to: localhost
- name: Query Leaf Access Switch Policy Group
cisco.aci.aci_access_switch_policy_group:
host: apic
username: admin
password: SomeSecretPassword
name: ansible_pol_grp_leaf
switch_type: leaf
state: query
delegate_to: localhost
register: query_result
- name: Query All Leaf Access Switch Policy Groups
cisco.aci.aci_access_switch_policy_group:
host: apic
username: admin
password: SomeSecretPassword
switch_type: leaf
state: query
delegate_to: localhost
register: query_result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The existing configuration from the APIC after the module has finished Returned: success Sample: |
|
The error information as returned from the APIC Returned: failure Sample: |
|
The filter string used for the request Returned: failure or debug Sample: |
|
The HTTP method used for the request to the APIC Returned: failure or debug Sample: |
|
The original configuration from the APIC before the module has started Returned: info Sample: |
|
The assembled configuration from the user-provided parameters Returned: info Sample: |
|
The raw output returned by the APIC REST API (xml or json) Returned: parse error Sample: |
|
The HTTP response from the APIC Returned: failure or debug Sample: |
|
The actual/minimal configuration pushed to the APIC Returned: info Sample: |
|
The HTTP status from the APIC Returned: failure or debug Sample: |
|
The HTTP url used for the request to the APIC Returned: failure or debug Sample: |