cisco.aci.aci_bulk_static_binding_to_epg module – Bind static paths to EPGs (fv:RsPathAtt)

Note

This module is part of the cisco.aci collection (version 2.10.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_bulk_static_binding_to_epg.

Synopsis

• Bind static paths to EPGs on Cisco ACI fabrics.

Parameters

Parameter	Comments
annotation string	User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead. If the value is not specified in the task and environment variable ACI_ANNOTATION then the default value will be used. Default: "orchestrator:ansible"
ap aliases: app_profile, app_profile_name string	The name of the application profile.
certificate_name aliases: cert_name string	The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a private_key filename was provided, this defaults to the private_key basename, without extension. If PEM-formatted content was provided for private_key, this defaults to the username value. If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.
deploy_immediacy string	The Deployment Immediacy of Static EPG on PC, VPC or Interface. The APIC defaults to lazy when unset during creation. Choices: "immediate" "lazy"
description aliases: descr string	Description for the static path to EPG binding.
encap_id aliases: vlan, vlan_id integer	The encapsulation ID associating the epg with the interface path. This acts as the secondary encap_id when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between 1 and 4096.
epg aliases: epg_name string	The name of the end point group.
host aliases: hostname string	IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.
interface_configs list / elements=dictionary	List of interface configurations, elements in the form of a dictionary. Module level attributes will be overridden by the path level attributes.
deploy_immediacy string	The Deployment Immediacy of Static EPG on PC, VPC or Interface. The APIC defaults to lazy when unset during creation. Choices: "immediate" "lazy"
description aliases: descr string	Description for the static path to EPG binding.
encap_id aliases: vlan, vlan_id integer	The encapsulation ID associating the epg with the interface path. This acts as the secondary encap_id when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between 1 and 4096.
extpaths list / elements=string	The extpaths integer value part of the tDn. extpaths is only used if interface_type is fex, fex_vpc or fex_port_channel. When interface_type is fex_vpc, then extpaths is a list with both fex IDs. Usually something like 1011.
interface string / required	The interface string value part of the tDn. Usually a policy group like test-IntPolGrp or an interface of the following format 1/7 depending on interface_type.
interface_mode aliases: interface_mode_name, mode string	Determines how layer 2 tags will be read from and added to frames. Values 802.1p and native are identical. Values access and untagged are identical. Values regular, tagged and trunk are identical. The APIC defaults to trunk when unset during creation. Choices: "802.1p" "access" "native" "regular" "tagged" "trunk" "untagged"
interface_type string	The type of interface for the static EPG deployment. Choices: "fex" "port_channel" "switch_port" "vpc" "fex_port_channel" "fex_vpc"
leafs aliases: leaves, nodes, paths, switches list / elements=string / required	The switch ID(s) that the interface belongs to. When interface_type is switch_port, port_channel, or fex, then leafs is a string of the leaf ID. When interface_type is vpc, then leafs is a list with both leaf IDs. The leafs value is usually something like ‘101’ or ‘101-102’ depending on connection_type.
pod_id aliases: pod, pod_number integer / required	The pod number part of the tDn. pod_id is usually an integer below 10.
primary_encap_id aliases: primary_vlan, primary_vlan_id string	Determines the primary encapsulation ID associating the epg with the interface path when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between 1 and 4096 and unknown. unknown is the default value and using unknown disables the Micro-Segmentation.
interface_mode aliases: interface_mode_name, mode string	Determines how layer 2 tags will be read from and added to frames. Values 802.1p and native are identical. Values access and untagged are identical. Values regular, tagged and trunk are identical. The APIC defaults to trunk when unset during creation. Choices: "802.1p" "access" "native" "regular" "tagged" "trunk" "untagged"
interface_type string	The type of interface for the static EPG deployment. Choices: "fex" "port_channel" "switch_port" ← (default) "vpc" "fex_port_channel" "fex_vpc"
output_level string	Influence the output of this ACI module. normal means the standard output, incl. current dict info adds informational output, incl. previous, proposed and sent dicts debug adds debugging output, incl. filter_string, method, response, status and url information If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead. Choices: "debug" "info" "normal" ← (default)
output_path string	Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.
password string	The password to use for authentication. This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.
port integer	Port number to be used for REST connection. The default value depends on parameter use_ssl. If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.
primary_encap_id aliases: primary_vlan, primary_vlan_id string	Determines the primary encapsulation ID associating the epg with the interface path when using micro-segmentation. Accepted values are any valid encap ID for specified encap, currently ranges between 1 and 4096 and unknown. unknown is the default value and using unknown disables the Micro-Segmentation.
private_key aliases: cert_key string	Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default certificate_name that is used. This option is mutual exclusive with password. If password is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.
state string	Use present or absent for adding or removing. Use query for listing an object or multiple objects. Choices: "absent" "present" ← (default) "query"
suppress_previous aliases: no_previous, ignore_previous boolean	If true, a GET to check previous will not be sent before a POST update to APIC. If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_PREVIOUS will be used instead. The default value is false. WARNING - This causes the previous return value to be empty. The previous state of the object will not be checked and the POST update will contain all properties. Choices: false true
suppress_verification aliases: no_verification, no_verify, suppress_verify, ignore_verify, ignore_verification boolean	If true, a verifying GET will not be sent after a POST update to APIC. If the value is not specified in the task, the value of environment variable ACI_SUPPRESS_VERIFICATION will be used instead. The default value is false. WARNING - This causes the current return value to be set to the proposed value. The current object including default values will be unverifiable in a single task. Choices: false true
tenant aliases: tenant_name string	Name of the tenant.
timeout integer	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead. The default value is 30.
use_proxy boolean	If false, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead. The default value is true. Choices: false true
use_ssl boolean	If false, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead. The default value is true when the connection is local. Choices: false true
username aliases: user string	The username to use for authentication. If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead. The default value is admin.
validate_certs boolean	If false, SSL certificates will not be validated. This should only set to false when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead. The default value is true. Choices: false true

Notes

Note

• The tenant, ap, epg used must exist before using this module in your playbook. The cisco.aci.aci_tenant, cisco.aci.aci_ap, cisco.aci.aci_epg modules can be used for this.

See Also

See also

cisco.aci.aci_tenant

Manage tenants (fv:Tenant).

cisco.aci.aci_ap

Manage top level Application Profile (AP) objects (fv:Ap).

cisco.aci.aci_epg

Manage End Point Groups (EPG) objects (fv:AEPg).

APIC Management Information Model reference

More information about the internal APIC class fv:RsPathAtt.

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Create list of interfaces using module level attributes
  cisco.aci.aci_bulk_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    encap_id: 221
    interface_mode: trunk
    deploy_immediacy: lazy
    description: "Module level attributes used to create interfaces"
    interface_configs:
      - interface: 1/7
        leafs: 101
        pod: 1
      - interface: 1/7
        leafs: 107
        pod: 7
      - interface: 1/8
        leafs: 108
        pod: 8
        encap_id: 108
    state: present
  delegate_to: localhost

- name: Create/Update list of interfaces using path level attributes
  cisco.aci.aci_bulk_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    interface_configs:
      - interface: 1/7
        leafs: 101
        pod: 1
        encap_id: 221
        interface_mode: trunk
        deploy_immediacy: lazy
        description: "Path level attributes used to create/update interfaces"
      - interface: 1/7
        leafs: 107
        pod: 7
        encap_id: 221
        interface_mode: trunk
        deploy_immediacy: lazy
        description: "Path level attributes used to create/update interfaces"
      - interface: 1/8
        leafs: 108
        pod: 8
        encap_id: 108
        interface_mode: trunk
        deploy_immediacy: lazy
        description: "Path level attributes used to create/update interfaces"
    state: present
  delegate_to: localhost

- name: Query all interfaces of an EPG
  cisco.aci.aci_bulk_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    state: query
  delegate_to: localhost

- name: Query all interfaces
  cisco.aci.aci_bulk_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost

- name: Remove list of interfaces
  cisco.aci.aci_bulk_static_binding_to_epg:
    host: apic
    username: admin
    password: SomeSecretPassword
    tenant: accessport-code-cert
    ap: accessport_code_app
    epg: accessport_epg1
    encap_id: 221
    interface_mode: trunk
    deploy_immediacy: lazy
    interface_configs:
      - interface: 1/7
        leafs: 101
        pod: 1
      - interface: 1/7
        leafs: 107
        pod: 7
      - interface: 1/8
        leafs: 108
        pod: 8
        encap_id: 108
    state: absent
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
current list / elements=string	The existing configuration from the APIC after the module has finished Returned: success Sample: [{"fvTenant": {"attributes": {"descr": "Production environment", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
error dictionary	The error information as returned from the APIC Returned: failure Sample: {"code": "122", "text": "unknown managed object class foo"}
filter_string string	The filter string used for the request Returned: failure or debug Sample: "?rsp-prop-include=config-only"
method string	The HTTP method used for the request to the APIC Returned: failure or debug Sample: "POST"
previous list / elements=string	The original configuration from the APIC before the module has started Returned: info Sample: [{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]
proposed dictionary	The assembled configuration from the user-provided parameters Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}
raw string	The raw output returned by the APIC REST API (xml or json) Returned: parse error Sample: "<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class foo\"/></imdata>"
response string	The HTTP response from the APIC Returned: failure or debug Sample: "OK (30 bytes)"
sent list / elements=string	The actual/minimal configuration pushed to the APIC Returned: info Sample: {"fvTenant": {"attributes": {"descr": "Production environment"}}}
status integer	The HTTP status from the APIC Returned: failure or debug Sample: 200
url string	The HTTP url used for the request to the APIC Returned: failure or debug Sample: "https://10.11.12.13/api/mo/uni/tn-production.json"

Authors

• Bruno Calogero (@brunocalogero)

• Marcel Zehnder (@maercu)

• Sabari Jaganathan (@sajagana)

Collection links

• Issue Tracker
• Repository (Sources)