cisco.dnac.site_intent module – Resource module for Site operations
Note
This module is part of the cisco.dnac collection (version 6.22.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.site_intent.
New in cisco.dnac 6.6.0
Synopsis
Manage operation create, update and delete of the resource Sites.
Creates site with area/building/floor with specified hierarchy.
Updates site with area/building/floor with specified hierarchy.
Deletes site with area/building/floor with specified hierarchy.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk == 2.4.5
python >= 3.9
Parameters
Parameter |
Comments |
|---|---|
It represents a list of details for creating/managing/deleting sites, including areas, buildings, and floors. |
|
Contains details about the site being managed including areas, buildings and floors. |
|
Configuration details for creating or managing an area within a site. |
|
Name of the area to be created or managed (e.g., “Area1”). |
|
The full name of the parent under which the area will be created/managed/deleted (e.g., “Global/USA”). |
|
Configuration details required for creating or managing a building within a site. |
|
Physical address of the building that is to be created or managed. |
|
Geographical latitude coordinate of the building. For example, use 37.338 for a location in San Jose, California. Valid values range from -90.0 to +90.0 degrees. |
|
Geographical longitude coordinate of the building. For example, use -121.832 for a location in San Jose, California. Valid values range from -180.0 to +180.0 degrees. |
|
Name of the building (e.g., “Building1”). |
|
Hierarchical parent path of the building, indicating its location within the site (e.g., “Global/USA/San Francisco”). |
|
Configuration details required for creating or managing a floor within a site. |
|
Floor number within the building site (e.g., 5). This value can only be specified during the creation of the floor and cannot be modified afterward. |
|
Height of the floor in feet (e.g., 15.23). |
|
Length of the floor in feet (e.g., 100.11). |
|
Name of the floor (e.g., “Floor-1”). |
|
Hierarchical parent path of the floor, indicating its location within the site (e.g., “Global/USA/San Francisco/BGL_18”). |
|
The RF (Radio Frequency) model type for the floor, which is essential for simulating and optimizing wireless network coverage. Select from the following allowed values, which describe different environmental signal propagation characteristics. Type of floor (allowed values are ‘Cubes And Walled Offices’, ‘Drywall Office Only’, ‘Indoor High Ceiling’, ‘Outdoor Open Space’). Cubes And Walled Offices - This RF model typically represents indoor areas with cubicles or walled offices, where radio signals may experience attenuation due to walls and obstacles. Drywall Office Only - This RF model indicates an environment with drywall partitions, commonly found in office spaces, which may have moderate signal attenuation. Indoor High Ceiling - This RF model is suitable for indoor spaces with high ceilings, such as auditoriums or atriums, where signal propagation may differ due to the height of the ceiling. Outdoor Open Space - This RF model is used for outdoor areas with open spaces, where signal propagation is less obstructed and may follow different patterns compared to indoor environments. |
|
Width of the floor in feet (e.g., 100.22). |
|
Type of site to create/update/delete (eg area, building, floor). |
|
Set to True to verify the Cisco Catalyst Center config after applying the playbook config. Choices:
|
|
Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices:
|
|
The Cisco DNA Center hostname. |
|
Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name ‘dnac.log’. When false, - Logging is disabled. If the log file doesn’t exist, - It is created in append or write mode based on the “dnac_log_append” flag. If the log file exists, - It is overwritten or appended based on the “dnac_log_append” flag. Choices:
|
|
Determines the mode of the file. Set to True for ‘append’ mode. Set to False for ‘write’ mode. Choices:
|
|
Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When ‘dnac_log_append’ is True, ‘dnac.log’ is generated in the current Ansible directory; logs are appended. - When ‘dnac_log_append’ is False, ‘dnac.log’ is generated; logs are overwritten. If path is specified, - When ‘dnac_log_append’ is True, the file opens in append mode. - When ‘dnac_log_append’ is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: |
|
Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: |
|
Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: |
|
The Cisco DNA Center username to authenticate. Default: |
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Cisco DNA Center to use. Default: |
|
The state of Catalyst Center after module completion. Choices:
|
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices:
|
Notes
Note
SDK Method used are sites.Sites.create_site, sites.Sites.update_site, sites.Sites.delete_site
Paths used are post /dna/intent/api/v1/site, put dna/intent/api/v1/site/{siteId}, delete dna/intent/api/v1/site/{siteId}
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
Examples
- name: Create a new area site
cisco.dnac.site_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log_level: "{{dnac_log_level}}"
dnac_log: "{{dnac_log}}"
state: merged
config:
- site:
area:
name: Test
parent_name: Global/India
site_type: area
- name: Create a new building site
cisco.dnac.site_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log_level: "{{dnac_log_level}}"
dnac_log: "{{dnac_log}}"
state: merged
config:
- site:
building:
name: Building_1
parent_name: Global/India
address: Bengaluru, Karnataka, India
latitude: 24.12
longitude: 23.45
site_type: building
- name: Create a Floor site under the building
cisco.dnac.site_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log_level: "{{dnac_log_level}}"
dnac_log: "{{dnac_log}}"
state: merged
config:
- site:
floor:
name: Floor_1
parent_name: Global/India/Building_1
length: 75.76
width: 35.54
height: 30.12
rf_model: Cubes And Walled Offices
floor_number: 2
site_type: floor
- name: Updating the Floor details under the building
cisco.dnac.site_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log_level: "{{dnac_log_level}}"
dnac_log: "{{dnac_log}}"
state: merged
config:
- site:
floor:
name: Floor_1
parent_name: Global/India/Building_1
length: 75.76
width: 35.54
height: 30.12
site_type: floor
- name: Deleting any site you need site name and parent name
cisco.dnac.site_intent:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
dnac_log_level: "{{dnac_log_level}}"
dnac_log: "{{dnac_log}}"
state: deleted
config:
- site:
floor:
name: Floor_1
parent_name: Global/India/Building_1
site_type: floor
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary with API execution details as returned by the Cisco Catalyst Center Python SDK Returned: always Sample: |
|
A dictionary with existing site details. Returned: always Sample: |
|
A dictionary with API execution details as returned by the Cisco Catalyst Center Python SDK Returned: always Sample: |
|
A list with the response returned by the Cisco Catalyst Center Python Returned: always Sample: |