cisco.ios.ios_bgp_address_family module – Resource module to configure BGP Address family.

Note

This module is part of the cisco.ios collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_bgp_address_family.

New in cisco.ios 1.2.0

Synopsis 

This module configures and manages the attributes of bgp address family on Cisco IOS.

Parameters 

Parameter	Comments
config dictionary	A list of configurations for bgp address family.
address_family list / elements=dictionary	A list of configurations for bgp address family.
advertise dictionary	Configure path advertise/export to other address-family
afi string	Address family for VRF advertise/export Choices: `"l2vpn"`
safi string	Advertise/export prefixes to address family Choices: `"evpn"`
afi string	Address Family Choices: `"ipv4"` `"ipv6"` `"l2vpn"` `"nsap"` `"rtfilter"` `"vpnv4"` `"vpnv6"`
aggregate_addresses aliases: aggregate_address list / elements=dictionary	Configure BGP aggregate entries
address string	Aggregate address(A.B.C.D)
advertise_map string	Set condition to advertise attribute
as_confed_set boolean	Generate AS confed set path information Choices: `false` `true`
as_set boolean	Generate AS set path information Choices: `false` `true`
attribute_map string	Set attributes of aggregate
netmask string	Aggregate mask(A.B.C.D)
summary_only boolean	Filter more specific routes from updates Choices: `false` `true`
suppress_map string	Conditionally filter more specific routes from updates
auto_summary boolean	Enable automatic network number summarization Choices: `false` `true`
bgp dictionary	Configure BGP aggregate entries
additional_paths dictionary	Additional paths in the BGP table
install boolean	Additional paths to install into RIB Choices: `false` `true`
receive boolean	Receive additional paths from neighbors Choices: `false` `true`
select dictionary	Selection criteria to pick the paths
all boolean	Select all available paths Choices: `false` `true`
backup boolean	Select backup path Choices: `false` `true`
best integer	Select best N paths (2-3).
best_external boolean	Select best-external path Choices: `false` `true`
group_best boolean	Select group-best path Choices: `false` `true`
send boolean	Send additional paths to neighbors Choices: `false` `true`
aggregate_timer integer	Configure Aggregation Timer Please refer vendor documentation for valid values
dampening dictionary	Enable route-flap dampening
max_suppress integer	Maximum duration to suppress a stable route Please refer vendor documentation for valid values
penalty_half_time integer	Half-life time for the penalty Please refer vendor documentation for valid values
reuse_route_val integer	Value to start reusing a route Please refer vendor documentation for valid values
route_map string	Route-map to specify criteria for dampening
suppress_route_val integer	Value to start suppressing a route Please refer vendor documentation for valid values
dmzlink_bw boolean	Use DMZ Link Bandwidth as weight for BGP multipaths Choices: `false` `true`
nexthop dictionary	Nexthop tracking commands
route_map string	Route map for valid nexthops
trigger dictionary	Nexthop triggering
delay integer	Set the delay to tigger nexthop tracking Please refer vendor documentation for valid values
enable boolean	Enable nexthop tracking Choices: `false` `true`
redistribute_internal boolean	Allow redistribution of iBGP into IGPs (dangerous) Choices: `false` `true`
route_map boolean	route-map control commands Have route-map set commands take priority over BGP commands such as next-hop unchanged Choices: `false` `true`
scan_time integer	Configure background scanner interval Please refer vendor documentation for valid values
slow_peer list / elements=dictionary	Nexthop triggering This option is DEPRECATED and replaced with slow_peer_options, this attribute will be removed after 2025-01-01.
detection dictionary	Slow-peer detection
enable boolean	Enable slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold Threshold value (seconds) Please refer vendor documentation for valid values
split_update_group dictionary	Configure slow-peer split-update-group
dynamic boolean	Dynamically split the slow peer to slow-update group Choices: `false` `true`
permanent boolean	Keep the slow-peer permanently in slow-update group Choices: `false` `true`
slow_peer_options dictionary	Nexthop triggering
detection dictionary	Slow-peer detection
enable boolean	Enable slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold Threshold value (seconds) Please refer vendor documentation for valid values
split_update_group dictionary	Configure slow-peer split-update-group
dynamic boolean	Dynamically split the slow peer to slow-update group Choices: `false` `true`
permanent boolean	Keep the slow-peer permanently in slow-update group Choices: `false` `true`
soft_reconfig_backup boolean	Use soft-reconfiguration inbound only when route-refresh is not negotiated Choices: `false` `true`
update_group boolean	Manage peers in bgp update groups Split update groups based on Policy Keep peers with as-override in different update groups Choices: `false` `true`
default boolean	Set a command to its defaults Choices: `false` `true`
default_information boolean	Distribution of default information Distribute default route Choices: `false` `true`
default_metric integer	Set metric of redistributed routes
distance dictionary	Define an administrative distance
external integer	Distance for routes external to the AS
internal integer	Distance for routes internal to the AS
local integer	Distance for local routes
neighbors aliases: neighbor list / elements=dictionary	Specify a neighbor router
activate boolean	Enable the Address Family for this Neighbor Choices: `false` `true`
additional_paths dictionary	Negotiate additional paths capabilities with this neighbor
disable boolean	Disable additional paths for this neighbor Choices: `false` `true`
receive boolean	Receive additional paths from neighbors Choices: `false` `true`
send boolean	Send additional paths to this neighbor Choices: `false` `true`
address string	Neighbor address (A.B.C.D) This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2025-01-01.
advertise dictionary	Advertise to this neighbor Advertise additional paths
all boolean	Select all available paths Choices: `false` `true`
best integer	Select best N paths (2-3).
group_best boolean	Select group-best path Choices: `false` `true`
advertise_map dictionary	specify route-map for conditional advertisement
exist_map string	advertise prefix only if prefix is in the condition exists condition route-map name
name string	advertise route-map name
non_exist_map string	advertise prefix only if prefix in the condition does not exist condition route-map name
advertisement_interval integer	Minimum interval between sending BGP routing updates
advertises dictionary	Advertise to this neighbor
additional_paths dictionary	Advertise additional paths
all boolean	Select all available paths Choices: `false` `true`
best integer	Select best N paths (2-3).
group_best boolean	Select group-best path Choices: `false` `true`
best_external boolean	Advertise best-external (at RRs best-internal) path Choices: `false` `true`
diverse_path dictionary	Advertise additional paths
backup boolean	Diverse path can be backup path Choices: `false` `true`
mpath boolean	Diverse path can be multipath Choices: `false` `true`
aigp dictionary	Enable a AIGP on neighbor
enable string	Enable a AIGP on neighbor
send dictionary	Cost community or MED carrying AIGP VALUE
cost_community dictionary	Cost extended community carrying AIGP Value
id integer	Community ID Please refer vendor documentation for valid values
poi dictionary	Point of Insertion
igp_cost boolean	Point of Insertion After IGP Choices: `false` `true`
pre_bestpath boolean	Point of Insertion At Beginning Choices: `false` `true`
transitive boolean	Cost community is Transitive Choices: `false` `true`
med boolean	Med carrying AIGP Value Choices: `false` `true`
allow_policy boolean	Enable the policy support for this IBGP Neighbor Choices: `false` `true`
allowas_in integer	Accept as-path with my AS present in it Please refer vendor documentation for valid values
as_override dictionary	Override matching AS-number while sending update
set boolean	Enable AS override Choices: `false` `true`
split_horizon boolean	Maintain Split Horizon while sending update Choices: `false` `true`
bmp_activate dictionary	Activate the BMP monitoring for a BGP peer
all boolean	Activate BMP monitoring for all servers Choices: `false` `true`
server integer	Activate BMP for server BMP Server Number Please refer vendor documentation for valid values
capability dictionary	Advertise capability to the peer Advertise ORF capability to the peer Advertise prefixlist ORF capability to this neighbor
both boolean	Capability to SEND and RECEIVE the ORF to/from this neighbor Choices: `false` `true`
receive boolean	Capability to RECEIVE the ORF from this neighbor Choices: `false` `true`
send boolean	Capability to SEND the ORF to this neighbor Choices: `false` `true`
cluster_id string	Configure Route-Reflector Cluster-id (peers may reset) Route-Reflector Cluster-id as 32 bit quantity, or Route-Reflector Cluster-id in IP address format (A.B.C.D)
default_originate dictionary	Originate default route to this neighbor
route_map string	Route-map to specify criteria to originate default
set boolean	Set default route to this neighbor Choices: `false` `true`
description string	Neighbor specific description
disable_connected_check boolean	one-hop away EBGP peer using loopback address Choices: `false` `true`
distribute_list dictionary	Filter updates to/from this neighbor
acl string	ACL id/name
in boolean	Filter incoming updates Choices: `false` `true`
out boolean	Filter outgoing updates Choices: `false` `true`
dmzlink_bw boolean	Propagate the DMZ link bandwidth Choices: `false` `true`
ebgp_multihop dictionary	Allow EBGP neighbors not on directly connected networks
enable boolean	Allow EBGP neighbors not on directly connected networks Choices: `false` `true`
hop_count integer	Maximum hop count Please refer vendor documentation for valid values
fall_over dictionary	Session fall on peer route lost
bfd dictionary	Use BFD to detect failure
multi_hop boolean	Force BFD multi-hop to detect failure Choices: `false` `true`
set boolean	set bfd Choices: `false` `true`
single_hop boolean	Force BFD single-hop to detect failure Choices: `false` `true`
route_map string	Route map for peer route
filter_list dictionary	Establish BGP filters
as_path_acl integer	AS path access list Please refer vendor documentation for valid values
in boolean	Filter incoming updates Choices: `false` `true`
out boolean	Filter outgoing updates Choices: `false` `true`
ha_mode dictionary	high availability mode
disable boolean	disable graceful-restart Choices: `false` `true`
set boolean	set ha-mode and graceful-restart for this peer Choices: `false` `true`
inherit string	Inherit a template Inherit a peer-policy template
internal_vpn_client boolean	Stack iBGP-CE Neighbor Path in ATTR_SET for vpn update Choices: `false` `true`
ipv6_address aliases: ipv6_adddress string	Neighbor ipv6 address (X:X:X:X::X) This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2025-01-01.
local_as dictionary	Specify a local-as number
dual_as boolean	Accept either real AS or local AS from the ebgp peer Choices: `false` `true`
no_prepend dictionary	Do not prepend local-as to updates from ebgp peers
replace_as boolean	Replace real AS with local AS in the EBGP updates Choices: `false` `true`
set boolean	Set prepend Choices: `false` `true`
number string	AS number used as local AS Please refer vendor documentation for valid values
set boolean	set local-as number Choices: `false` `true`
log_neighbor_changes dictionary	Log neighbor up/down and reset reason
disable boolean	disable Log neighbor up/down and reset Choices: `false` `true`
set boolean	set Log neighbor up/down and reset Choices: `false` `true`
maximum_prefix dictionary	Establish BGP filters
number integer	maximum no. of prefix limit Please refer vendor documentation for valid values
restart integer	Restart bgp connection after limit is exceeded
threshold_value integer	Threshold value (%) at which to generate a warning msg Please refer vendor documentation for valid values
warning_only boolean	Only give warning message when limit is exceeded Choices: `false` `true`
neighbor_address string	Neighbor address (A.B.C.D) Neighbor tag Neighbor ipv6 address (X:X:X:X::X)
next_hop_unchanged dictionary	Propagate next hop unchanged for iBGP paths to this neighbor Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor
allpaths boolean	Propagate next hop unchanged for all paths (iBGP and eBGP) to this neighbor Choices: `false` `true`
set boolean	Enable next-hop-unchanged Choices: `false` `true`
nexthop_self dictionary	Disable the next hop calculation for this neighbor
all boolean	Enable next-hop-self for both eBGP and iBGP received paths Choices: `false` `true`
set boolean	set the next hop self Choices: `false` `true`
password string	Set a password This option is DEPRECATED and is replaced with password_options which accepts dict as input, this attribute will be removed after 2024-06-01.
password_options dictionary	Set a password with encryption type
encryption integer	Encryption type (0 to disable encryption, 7 for proprietary)
pass_key string	The password
path_attribute dictionary	BGP optional attribute filtering
discard dictionary	Discard matching path-attribute for this neighbor
in boolean	Perform inbound path-attribute filtering Choices: `false` `true`
range dictionary	path attribute range
end integer	path attribute range end value Please refer vendor documentation for valid values
start integer	path attribute range start value Please refer vendor documentation for valid values
type integer	path attribute type Please refer vendor documentation for valid values
treat_as_withdraw dictionary	Treat-as-withdraw matching path-attribute for this neighbor
in boolean	Perform inbound path-attribute filtering Choices: `false` `true`
range dictionary	path attribute range
end integer	path attribute range end value Please refer vendor documentation for valid values
start integer	path attribute range start value Please refer vendor documentation for valid values
type integer	path attribute type Please refer vendor documentation for valid values
peer_group boolean	Member of the peer-group Choices: `false` `true`
peer_group_name string	Member of the peer-group
prefix_list dictionary	Filter updates to/from this neighbor This option is DEPRECATED and is replaced with prefix_lists which accepts list of dict as input
in boolean	Filter incoming updates Choices: `false` `true`
name string	Name of a prefix list
out boolean	Filter outgoing updates Choices: `false` `true`
prefix_lists list / elements=dictionary	Filter updates to/from this neighbor
in boolean	Filter incoming updates Choices: `false` `true`
name string	Name of a prefix list
out boolean	Filter outgoing updates Choices: `false` `true`
remote_as string	Specify a BGP neighbor AS of remote neighbor
remove_private_as dictionary	Remove private AS number from outbound updates
all boolean	Remove all private AS numbers Choices: `false` `true`
replace_as boolean	Replace all private AS numbers with local AS Choices: `false` `true`
set boolean	Remove private AS number from outbound updates Choices: `false` `true`
route_map dictionary	Apply route map to neighbor This option is DEPRECATED and is replaced with route_maps which accepts list of dict as input
in boolean	Apply map to incoming routes Choices: `false` `true`
name string	Name of route map
out boolean	Apply map to outbound routes Choices: `false` `true`
route_maps list / elements=dictionary	Apply route map to neighbor
in boolean	Apply map to incoming routes Choices: `false` `true`
name string	Name of route map
out boolean	Apply map to outbound routes Choices: `false` `true`
route_reflector_client boolean	Configure a neighbor as Route Reflector client Choices: `false` `true`
route_server_client boolean	Configure a neighbor as Route Server client Choices: `false` `true`
send_community dictionary	Send Community attribute to this neighbor
both boolean	Send Standard and Extended Community attributes Choices: `false` `true`
extended boolean	Send Extended Community attribute Choices: `false` `true`
set boolean	Send Standard Community attribute. Maintains backwards compatibility for configurations that do not specify a send-community type. Choices: `false` `true`
standard boolean	Send Standard Community attribute Choices: `false` `true`
shutdown dictionary	Administratively shut down this neighbor
graceful integer	Gracefully shut down this neighbor time in seconds Please refer vendor documentation for valid values
set boolean	shut down Choices: `false` `true`
slow_peer list / elements=dictionary	Configure slow-peer This option is DEPRECATED and replaced with slow_peer_options, this attribute will be removed after 2025-01-01.
detection dictionary	Configure slow-peer
disable boolean	Disable slow-peer detection Choices: `false` `true`
enable boolean	Enable slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold
split_update_group dictionary	Configure slow-peer
dynamic dictionary	Configure slow-peer
disable boolean	Configure slow-peer Choices: `false` `true`
enable boolean	Configure slow-peer Choices: `false` `true`
permanent boolean	Configure slow-peer Choices: `false` `true`
static boolean	Configure slow-peer Choices: `false` `true`
slow_peer_options dictionary	Configure slow-peer options
detection dictionary	Configure slow-peer
disable boolean	Disable slow-peer detection Choices: `false` `true`
enable boolean	Enable slow-peer detection Choices: `false` `true`
threshold integer	Set the slow-peer detection threshold
split_update_group dictionary	Configure slow-peer
dynamic dictionary	Configure slow-peer
disable boolean	Configure slow-peer Choices: `false` `true`
enable boolean	Configure slow-peer Choices: `false` `true`
permanent boolean	Configure slow-peer Choices: `false` `true`
static boolean	Configure slow-peer Choices: `false` `true`
soft_reconfiguration boolean	Per neighbor soft reconfiguration Allow inbound soft reconfiguration for this neighbor Choices: `false` `true`
soo string	Site-of-Origin extended community
tag string	Neighbor tag This option is DEPRECATED and replaced with neighbor_address, this attribute will be removed after 2025-01-01.
timers dictionary	BGP per neighbor timers
holdtime integer	Holdtime
interval integer	Keepalive interval
min_holdtime integer	Minimum hold time from neighbor
transport dictionary	Transport options
connection_mode dictionary	Specify passive or active connection
active boolean	Actively establish the TCP session Choices: `false` `true`
passive boolean	Passively establish the TCP session Choices: `false` `true`
multi_session boolean	Use Multi-session for transport Choices: `false` `true`
path_mtu_discovery dictionary	Use transport path MTU discovery
disable boolean	disable Choices: `false` `true`
set boolean	Use path MTU discovery Choices: `false` `true`
ttl_security integer	BGP ttl security check maximum number of hops Please refer vendor documentation for valid values
unsuppress_map string	Route-map to selectively unsuppress suppressed routes
version integer	Set the BGP version to match a neighbor Neighbor’s BGP version Please refer vendor documentation for valid values
weight integer	Set default weight for routes from this neighbor
networks aliases: network list / elements=dictionary	Specify a network to announce via BGP
address string	Network number (A.B.C.D)
backdoor boolean	Specify a BGP backdoor route Choices: `false` `true`
evpn boolean	Advertise or Export to EVPN address-family Choices: `false` `true`
mask string	Network mask (A.B.C.D)
route_map string	Route-map to modify the attributes
redistribute list / elements=dictionary	Redistribute information from another routing protocol
application dictionary	Application
metric integer	Metric for redistributed routes
name string	Application name
route_map string	Route map reference
bgp dictionary	Border Gateway Protocol (BGP)
as_number string	Autonomous system number
metric integer	Metric for redistributed routes
route_map string	Route map reference
connected dictionary	Connected
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Redistribute automatically established IP connected routes. This only needs to be set if metric or route_map aren’t used. Choices: `false` `true`
eigrp dictionary	Enhanced Interior Gateway Routing Protocol (EIGRP)
as_number string	Autonomous system number
metric integer	Metric for redistributed routes
route_map string	Route map reference
isis dictionary	ISO IS-IS
area_tag string	ISO routing area tag
clns boolean	Redistribution of OSI dynamic routes Choices: `false` `true`
ip boolean	Redistribution of IP dynamic routes Choices: `false` `true`
metric integer	Metric for redistributed routes
route_map string	Route map reference
iso_igrp dictionary	IGRP for OSI networks
area_tag string	ISO routing area tag
route_map string	Route map reference
lisp dictionary	Locator ID Separation Protocol (LISP)
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
mobile dictionary	Mobile routes
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
odr dictionary	On Demand stub Routes
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
ospf dictionary	Open Shortest Path First (OSPF)
include_connected boolean	Include connected. Only applicable under IPv6 AFI Choices: `false` `true`
match dictionary	Redistribute matched routes
external boolean	Redistribute OSPF external routes This option is DEPRECATED and replaced with externals option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
externals dictionary	Redistribute OSPF external routes
type_1 boolean	Redistribute OSPF External type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute OSPF External type 1 routes Choices: `false` `true`
internal boolean	Redistribute OSPF internal routes Choices: `false` `true`
nssa_external boolean	Redistribute OSPF NSSA external routes This option is DEPRECATED and replaced with nssa_externals option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
nssa_externals dictionary	Redistribute OSPF NSSA external routes
type_1 boolean	Redistribute NSSA external type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes Choices: `false` `true`
type_1 boolean	Redistribute NSSA external type 1 routes This option is DEPRECATED and replaced with nssa_externals.type_1 option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes This option is DEPRECATED and replaced with nssa_externals.type_2 option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
metric integer	Metric for redistributed routes
process_id integer	Process ID
route_map string	Route map reference
vrf string	VPN Routing/Forwarding Instance
ospfv3 dictionary	OSPFv3
match dictionary	Redistribute matched routes
external boolean	Redistribute OSPF external routes This option is DEPRECATED and replaced with externals, this attribute will be removed after 2025-01-01. Choices: `false` `true`
externals dictionary	Redistribute OSPF external routes
type_1 boolean	Redistribute OSPF External type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute OSPF External type 1 routes Choices: `false` `true`
internal boolean	Redistribute OSPF internal routes Choices: `false` `true`
nssa_external boolean	Redistribute OSPF internal routes This option is DEPRECATED and replaced with nssa_externals, this attribute will be removed after 2025-01-01. Choices: `false` `true`
nssa_externals dictionary	Redistribute OSPF NSSA external routes
type_1 boolean	Redistribute NSSA external type 1 routes Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes Choices: `false` `true`
type_1 boolean	Redistribute NSSA external type 1 routes This option is DEPRECATED and replaced with nssa_externals.type_1 option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
type_2 boolean	Redistribute NSSA external type 2 routes This option is DEPRECATED and replaced with nssa_externals.type_2 option, this attribute will be removed after 2025-01-01. Choices: `false` `true`
metric integer	Metric for redistributed routes
process_id integer	Process ID
route_map string	Route map reference
rip dictionary	Routing Information Protocol (RIP)
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
static dictionary	Static routes
clns boolean	Redistribution of OSI static routes Choices: `false` `true`
ip boolean	Redistribution of IP static routes Choices: `false` `true`
metric integer	Metric for redistributed routes
route_map string	Route map reference
set boolean	Set the top level attribute Choices: `false` `true`
vrf dictionary	Specify a source VRF
global boolean	global VRF Choices: `false` `true`
name string	Source VRF name
safi string	Address Family modifier Choices: `"flowspec"` `"mdt"` `"multicast"` `"mvpn"` `"evpn"` `"unicast"`
snmp dictionary	Modify snmp parameters
context dictionary	Configure a SNMP context Context Name
community dictionary	Configure a SNMP v2c Community string and access privs
acl string	Standard IP accesslist allowing access with this community string Expanded IP accesslist allowing access with this community string Access-list name
ipv6 string	Specify IPv6 Named Access-List IPv6 Access-list name
ro boolean	Read-only access with this community string Choices: `false` `true`
rw boolean	Read-write access with this community string Choices: `false` `true`
snmp_community string	SNMP community string
name string	Context Name
user dictionary	Configure a SNMP v3 user
access dictionary	specify an access-list associated with this group
acl string	SNMP community string
ipv6 string	Specify IPv6 Named Access-List IPv6 Access-list name
auth dictionary	authentication parameters for the user
md5 string	Use HMAC MD5 algorithm for authentication authentication password for user
sha string	Use HMAC SHA algorithm for authentication authentication password for user
credential boolean	If the user password is already configured and saved Choices: `false` `true`
encrypted boolean	specifying passwords as MD5 or SHA digests Choices: `false` `true`
name string	SNMP community string
priv dictionary	encryption parameters for the user
aes128 string	Use 128 bit AES algorithm for encryption
aes192 string	Use 192 bit 3DES algorithm for encryption
aes256 string	Use 256 bit DES algorithm for encryption
des string	Use 56 bit DES algorithm for encryption
des56 string	Use 56 bit DES algorithm for encryption
table_map dictionary	Map external entry attributes into routing table
filter boolean	Selective route download Choices: `false` `true`
name string	route-map name
vrf string	Specify parameters for a VPN Routing/Forwarding instance
as_number string	Autonomous system number.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^router bgp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command show running-config \| include ip route\|ipv6 route executed on device. For state parsed active connection to remote host is not required. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"rendered"` `"parsed"`

Notes 

Note

Tested against Cisco IOS-XE Version 17.3 on CML.
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html
The module examples uses callback plugin (stdout_callback = yaml) to generate task output in yaml format.

Examples 

# Using merged

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay cold-boot 20

- name: Merge provided configuration with device configuration
  cisco.ios.ios_bgp_address_family:
    config:
      as_number: 65000
      address_family:
        - afi: ipv4
          safi: multicast
          vrf: blue
          aggregate_address:
            - address: 192.0.2.1
              netmask: 255.255.255.255
              as_confed_set: true
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 1
              reuse_route_val: 1
              suppress_route_val: 1
              max_suppress: 1
            slow_peer:
              - detection:
                  threshold: 150
          neighbor:
            - address: 198.51.100.1
              aigp:
                send:
                  cost_community:
                    id: 100
                    poi:
                      igp_cost: true
                      transitive: true
              slow_peer:
                - detection:
                    threshold: 150
              remote_as: 10
              route_map:
                - name: test-route-out
                  out: true
                - name: test-route-in
                  in: true
              route_server_client: true
          network:
            - address: 198.51.110.10
              mask: 255.255.255.255
              backdoor: true
          snmp:
            context:
              name: snmp_con
              community:
                snmp_community: community
                ro: true
                acl: 10
        - afi: ipv4
          safi: mdt
          bgp:
            dmzlink_bw: true
            dampening:
              penalty_half_time: 1
              reuse_route_val: 10
              suppress_route_val: 100
              max_suppress: 5
            soft_reconfig_backup: true
        - afi: ipv4
          safi: multicast
          aggregate_address:
            - address: 192.0.3.1
              netmask: 255.255.255.255
              as_confed_set: true
          default_metric: 12
          distance:
            external: 10
            internal: 10
            local: 100
          network:
            - address: 198.51.111.11
              mask: 255.255.255.255
              route_map: test
          table_map:
            name: test_tableMap
            filter: true
    state: merged

# Task Output:
# ------------
#
# before: {}
# commands:
#   - router bgp 65000
#   - address-family ipv4 multicast vrf blue
#   - bgp aggregate-timer 10
#   - bgp dampening 1 1 1 1
#   - bgp slow-peer detection threshold 150
#   - snmp context snmp_con community community ro 10
#   - neighbor 198.51.100.1 remote-as 10
#   - neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   - neighbor 198.51.100.1 slow-peer detection threshold 150
#   - network 198.51.110.10 mask 255.255.255.255 backdoor
#   - aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   - address-family ipv4 multicast
#   - default-metric 12
#   - distance bgp 10 10 100
#   - table-map test_tableMap filter
#   - network 198.51.111.11 mask 255.255.255.255 route-map test
#   - aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
#   - address-family ipv4 mdt
#   - bgp dmzlink-bw
#   - bgp soft-reconfig-backup
#   - bgp dampening 1 10 100 5
# after:
#   address_family:
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.2.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 1
#         penalty_half_time: 1
#         reuse_route_val: 1
#         suppress_route_val: 1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     neighbors:
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 100
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.100.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     networks:
#     - address: 198.51.110.10
#       backdoor: true
#       mask: 255.255.255.255
#     snmp:
#       context:
#         community:
#           acl: '10'
#           ro: true
#           snmp_community: community
#         name: snmp_con
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.3.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     default_metric: 12
#     distance:
#       external: 10
#       internal: 10
#       local: 100
#     networks:
#     - address: 198.51.111.11
#       mask: 255.255.255.255
#       route_map: test
#     safi: multicast
#     table_map:
#       filter: true
#       name: test_tableMap
#   - afi: ipv4
#     bgp:
#       dampening:
#         max_suppress: 5
#         penalty_half_time: 1
#         reuse_route_val: 10
#         suppress_route_val: 100
#       dmzlink_bw: true
#       soft_reconfig_backup: true
#     safi: mdt
#   as_number: '65000'

# After state:
# ------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  snmp context snmp_con community community RO 10
#  neighbor 198.51.100.1 remote-as 10
#  !
#  address-family ipv4
#   snmp context snmp_con community community RO 10
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 150
#   bgp dampening 1 1 1 1
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#  exit-address-family
#  !
#  address-family ipv4 multicast
#   table-map test_tableMap filter
#   network 198.51.111.11 mask 255.255.255.255 route-map test
#   aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
#   default-metric 12
#   distance bgp 10 10 100
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family

# Using replaced

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  snmp context snmp_con community community RO 10
#  neighbor 198.51.100.1 remote-as 10
#  !
#  address-family ipv4
#   snmp context snmp_con community community RO 10
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 150
#   bgp dampening 1 1 1 1
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#  exit-address-family
#  !
#  address-family ipv4 multicast
#   table-map test_tableMap filter
#   network 198.51.111.11 mask 255.255.255.255 route-map test
#   aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
#   default-metric 12
#   distance bgp 10 10 100
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family

- name: Replaces device configuration of listed AF BGP with provided configuration
  cisco.ios.ios_bgp_address_family:
    config:
      as_number: 65000
      address_family:
        - afi: ipv4
          safi: multicast
          vrf: blue
          aggregate_address:
            - address: 192.0.2.1
              netmask: 255.255.255.255
              as_confed_set: true
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 1
              reuse_route_val: 1
              suppress_route_val: 1
              max_suppress: 1
            slow_peer:
              - detection:
                  threshold: 150
          neighbor:
            - address: 198.51.110.1
              activate: true
              aigp:
                send:
                  cost_community:
                    id: 200
                    poi:
                      igp_cost: true
                      transitive: true
              slow_peer:
                - detection:
                    threshold: 150
              remote_as: 10
          network:
            - address: 198.51.110.10
              mask: 255.255.255.255
              backdoor: true
        - afi: ipv4
          safi: multicast
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 10
              reuse_route_val: 10
              suppress_route_val: 10
              max_suppress: 10
            slow_peer:
              - detection:
                  threshold: 200
          network:
            - address: 192.0.2.1
              mask: 255.255.255.255
              route_map: test
    state: replaced

# Task Output:
# ------------
# before:
#     address_family:
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.2.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       bgp:
#         aggregate_timer: 10
#         dampening:
#           max_suppress: 1
#           penalty_half_time: 1
#           reuse_route_val: 1
#           suppress_route_val: 1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       neighbors:
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 100
#               poi:
#                 igp_cost: true
#                 transitive: true
#         neighbor_address: 198.51.100.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       networks:
#       - address: 198.51.110.10
#         backdoor: true
#         mask: 255.255.255.255
#       snmp:
#         context:
#           community:
#             acl: '10'
#             ro: true
#             snmp_community: community
#           name: snmp_con
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.3.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       default_metric: 12
#       distance:
#         external: 10
#         internal: 10
#         local: 100
#       networks:
#       - address: 198.51.111.11
#         mask: 255.255.255.255
#         route_map: test
#       safi: multicast
#       table_map:
#         filter: true
#         name: test_tableMap
#     - afi: ipv4
#       bgp:
#         dampening:
#           max_suppress: 5
#           penalty_half_time: 1
#           reuse_route_val: 10
#           suppress_route_val: 100
#         dmzlink_bw: true
#         soft_reconfig_backup: true
#       safi: mdt
#     as_number: '65000'
# commands:
# - router bgp 65000
# - address-family ipv4 multicast vrf blue
# - bgp aggregate-timer 10
# - bgp dampening 1 1 1 1
# - bgp slow-peer detection threshold 150
# - neighbor 198.51.110.1 remote-as 10
# - neighbor 198.51.110.1 activate
# - neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
# - neighbor 198.51.110.1 slow-peer detection threshold 150
# - network 198.51.110.10 mask 255.255.255.255 backdoor
# - aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
# - address-family ipv4 multicast
# - no default-metric 12
# - no distance bgp 10 10 100
# - no table-map test_tableMap filter
# - bgp aggregate-timer 10
# - bgp dampening 10 10 10 10
# - bgp slow-peer detection threshold 200
# - network 192.0.2.1 mask 255.255.255.255 route-map test
# - no network 198.51.111.11 mask 255.255.255.255 route-map test
# - no aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
# after:
#   address_family:
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.2.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 1
#         penalty_half_time: 1
#         reuse_route_val: 1
#         suppress_route_val: 1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     neighbors:
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 100
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.100.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 200
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.110.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     networks:
#     - address: 198.51.110.10
#       backdoor: true
#       mask: 255.255.255.255
#     snmp:
#       context:
#         community:
#           acl: '10'
#           ro: true
#           snmp_community: community
#         name: snmp_con
#   - afi: ipv4
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 10
#         penalty_half_time: 10
#         reuse_route_val: 10
#         suppress_route_val: 10
#       slow_peer_options:
#         detection:
#           threshold: 200
#     networks:
#     - address: 192.0.2.1
#       mask: 255.255.255.255
#       route_map: test
#     safi: multicast
#   - afi: ipv4
#     bgp:
#       dampening:
#         max_suppress: 5
#         penalty_half_time: 1
#         reuse_route_val: 10
#         suppress_route_val: 100
#       dmzlink_bw: true
#       soft_reconfig_backup: true
#     safi: mdt
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  snmp context snmp_con community community RO 10
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 10
#  !
#  address-family ipv4
#   snmp context snmp_con community community RO 10
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 150
#   bgp dampening 1 1 1 1
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#  exit-address-family
#  !
#  address-family ipv4 multicast
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 192.0.2.1 mask 255.255.255.255 route-map test
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family

# Using overridden

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  snmp context snmp_con community community RO 10
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 10
#  !
#  address-family ipv4
#   snmp context snmp_con community community RO 10
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 150
#   bgp dampening 1 1 1 1
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#  exit-address-family
#  !
#  address-family ipv4 multicast
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 192.0.2.1 mask 255.255.255.255 route-map test
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family

- name: Override device configuration of all AF BGP with provided configuration
  cisco.ios.ios_bgp_address_family:
    config:
      as_number: 65000
      address_family:
        - afi: ipv4
          safi: multicast
          vrf: blue
          aggregate_address:
            - address: 192.0.2.1
              netmask: 255.255.255.255
              as_confed_set: true
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 10
              reuse_route_val: 10
              suppress_route_val: 100
              max_suppress: 50
            slow_peer:
              - detection:
                  threshold: 150
          neighbor:
            - address: 198.51.110.1
              activate: true
              log_neighbor_changes:
                disable: true
              maximum_prefix:
                number: 1
                threshold_value: 10
                restart: 100
              slow_peer:
                - detection:
                    threshold: 150
              remote_as: 100
              version: 4
          network:
            - address: 198.51.110.10
              mask: 255.255.255.255
              backdoor: true
        - afi: ipv6
          safi: multicast
          default_information: true
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 10
              reuse_route_val: 10
              suppress_route_val: 10
              max_suppress: 10
            slow_peer:
              - detection:
                  threshold: 200
          network:
            - address: 2001:DB8:0:3::/64
              route_map: test_ipv6
    state: overridden

# Task Output:
# ------------
#
# before:
#     address_family:
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.2.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       bgp:
#         aggregate_timer: 10
#         dampening:
#           max_suppress: 10
#           penalty_half_time: 10
#           reuse_route_val: 10
#           suppress_route_val: 10
#         slow_peer_options:
#           detection:
#             threshold: 200
#       default_information: true
#       neighbors:
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 100
#               poi:
#                 igp_cost: true
#                 transitive: true
#         neighbor_address: 198.51.100.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 200
#               poi:
#                 igp_cost: true
#                 transitive: true
#         maximum_prefix:
#           number: 1
#           restart: 100
#           threshold_value: 10
#         neighbor_address: 198.51.110.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       networks:
#       - address: 198.51.110.10
#         backdoor: true
#         mask: 255.255.255.255
#     - afi: ipv4
#       safi: multicast
#     - afi: ipv4
#       safi: mdt
#     - afi: ipv6
#       safi: multicast
#     as_number: '65000'
# commands:
# - router bgp 65000
# - address-family ipv4
# - no default-information originate
# - no bgp aggregate-timer 10
# - no bgp dampening 10 10 10 10
# - no bgp slow-peer detection threshold 200
# - no neighbor 198.51.100.1
# - no neighbor 198.51.110.1
# - no network 198.51.110.10 mask 255.255.255.255 backdoor
# - no aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
# - address-family ipv4 multicast vrf blue
# - bgp aggregate-timer 10
# - bgp dampening 10 10 100 50
# - bgp slow-peer detection threshold 150
# - neighbor 198.51.110.1 remote-as 100
# - neighbor 198.51.110.1 activate
# - neighbor 198.51.110.1 disable
# - neighbor 198.51.110.1 maximum-prefix 1 10 restart 100
# - neighbor 198.51.110.1 slow-peer detection threshold 150
# - neighbor 198.51.110.1 version 4
# - network 198.51.110.10 mask 255.255.255.255 backdoor
# - aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
# - address-family ipv6 multicast
# - default-information originate
# - bgp aggregate-timer 10
# - bgp dampening 10 10 10 10
# - bgp slow-peer detection threshold 200
# after:
#   address_family:
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.2.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 10
#         penalty_half_time: 10
#         reuse_route_val: 10
#         suppress_route_val: 10
#       slow_peer_options:
#         detection:
#           threshold: 200
#     default_information: true
#     neighbors:
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 100
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.100.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 200
#             poi:
#               igp_cost: true
#               transitive: true
#       maximum_prefix:
#         number: 1
#         restart: 100
#         threshold_value: 10
#       neighbor_address: 198.51.110.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     networks:
#     - address: 198.51.110.10
#       backdoor: true
#       mask: 255.255.255.255
#   - afi: ipv4
#     safi: multicast
#   - afi: ipv4
#     safi: mdt
#   - afi: ipv6
#     safi: multicast
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 100
#  neighbor 198.51.110.1 disable-connected-check
#  neighbor 198.51.110.1 version 4
#  !
#  address-family ipv4
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 maximum-prefix 1 10 restart 100
#   default-information originate
#  exit-address-family
#  !
#  address-family ipv4 multicast
#  exit-address-family
#  !
#  address-family ipv4 mdt
#  exit-address-family
#  !
#  address-family ipv6 multicast
#  exit-address-family

# Using deleted

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 100
#  neighbor 198.51.110.1 disable-connected-check
#  neighbor 198.51.110.1 version 4
#  !
#  address-family ipv4
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 maximum-prefix 1 10 restart 100
#   default-information originate
#  exit-address-family
#  !
#  address-family ipv4 multicast
#  exit-address-family
#  !
#  address-family ipv4 mdt
#  exit-address-family
#  !
#  address-family ipv6 multicast
#  exit-address-family

- name: "Delete AF BGP (Note: This won't delete the all configured AF BGP)"
  cisco.ios.ios_bgp_address_family:
    config:
      as_number: 65000
      address_family:
        - afi: ipv4
          safi: multicast
        - afi: ipv4
          safi: mdt
    state: deleted

# Task Output:
# ------------
#
# before:
#     address_family:
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.2.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       bgp:
#         aggregate_timer: 10
#         dampening:
#           max_suppress: 10
#           penalty_half_time: 10
#           reuse_route_val: 10
#           suppress_route_val: 10
#         slow_peer_options:
#           detection:
#             threshold: 200
#       default_information: true
#       neighbors:
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 100
#               poi:
#                 igp_cost: true
#                 transitive: true
#         neighbor_address: 198.51.100.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 200
#               poi:
#                 igp_cost: true
#                 transitive: true
#         maximum_prefix:
#           number: 1
#           restart: 100
#           threshold_value: 10
#         neighbor_address: 198.51.110.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       networks:
#       - address: 198.51.110.10
#         backdoor: true
#         mask: 255.255.255.255
#     - afi: ipv4
#       safi: multicast
#     - afi: ipv4
#       safi: mdt
#     - afi: ipv6
#       safi: multicast
#     as_number: '65000'
# commands:
# - router bgp 65000
# - no address-family ipv4 multicast
# - no address-family ipv4 mdt
# after:
#   address_family:
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.2.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 10
#         penalty_half_time: 10
#         reuse_route_val: 10
#         suppress_route_val: 10
#       slow_peer_options:
#         detection:
#           threshold: 200
#     default_information: true
#     neighbors:
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 100
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.100.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 200
#             poi:
#               igp_cost: true
#               transitive: true
#       maximum_prefix:
#         number: 1
#         restart: 100
#         threshold_value: 10
#       neighbor_address: 198.51.110.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     networks:
#     - address: 198.51.110.10
#       backdoor: true
#       mask: 255.255.255.255
#   - afi: ipv6
#     safi: multicast
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bg
# hostname#show running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 100
#  neighbor 198.51.110.1 disable-connected-check
#  neighbor 198.51.110.1 version 4
#  !
#  address-family ipv4
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 maximum-prefix 1 10 restart 100
#   default-information originate
#  exit-address-family
#  !
#  address-family ipv6 multicast
#  exit-address-family

# Using Deleted without any config passed (delete all)

# Before state:
# -------------
#
# vios#sh running-config | section ^router bg
# hostname#show running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 100
#  neighbor 198.51.110.1 disable-connected-check
#  neighbor 198.51.110.1 version 4
#  !
#  address-family ipv4
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 200
#   bgp dampening 10 10 10 10
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 activate
#   neighbor 198.51.110.1 aigp send cost-community 200 poi igp-cost transitive
#   neighbor 198.51.110.1 slow-peer detection threshold 150
#   neighbor 198.51.110.1 maximum-prefix 1 10 restart 100
#   default-information originate
#  exit-address-family
#  !
#  address-family ipv6 multicast
#  exit-address-family

- name: "Delete ALL of configured AF BGP"
  cisco.ios.ios_bgp_address_family:
    state: deleted

# Task Output:
# ------------
#
# before:
#   address_family:
#   - afi: ipv4
#     aggregate_addresses:
#     - address: 192.0.2.1
#       as_confed_set: true
#       netmask: 255.255.255.255
#     bgp:
#       aggregate_timer: 10
#       dampening:
#         max_suppress: 10
#         penalty_half_time: 10
#         reuse_route_val: 10
#         suppress_route_val: 10
#       slow_peer_options:
#         detection:
#           threshold: 200
#     default_information: true
#     neighbors:
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 100
#             poi:
#               igp_cost: true
#               transitive: true
#       neighbor_address: 198.51.100.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     - activate: true
#       aigp:
#         send:
#           cost_community:
#             id: 200
#             poi:
#               igp_cost: true
#               transitive: true
#       maximum_prefix:
#         number: 1
#         restart: 100
#         threshold_value: 10
#       neighbor_address: 198.51.110.1
#       slow_peer_options:
#         detection:
#           threshold: 150
#     networks:
#     - address: 198.51.110.10
#       backdoor: true
#       mask: 255.255.255.255
#   - afi: ipv6
#     safi: multicast
#   as_number: '65000'
# commands:
# - router bgp 65000
# - no address-family ipv4
# - no address-family ipv6 multicast
# after:
#   address_family:
#   - afi: ipv4
#     bgp:
#       aggregate_timer: 10
#   as_number: '65000'

# After state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  neighbor 198.51.100.1 remote-as 10
#  neighbor 198.51.110.1 remote-as 100
#  neighbor 198.51.110.1 disable-connected-check
#  neighbor 198.51.110.1 version 4
#  !
#  address-family ipv4
#   bgp aggregate-timer 10
#   no neighbor 198.51.100.1 activate
#   no neighbor 198.51.110.1 activate
#  exit-address-family

# Using gathered

# Before state:
# -------------
#
# vios#sh running-config | section ^router bgp
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp graceful-shutdown all neighbors 50 local-preference 100 community 100
#  snmp context snmp_con community community RO 10
#  neighbor 198.51.100.1 remote-as 10
#  !
#  address-family ipv4
#   snmp context snmp_con community community RO 10
#   bgp aggregate-timer 10
#   bgp slow-peer detection threshold 150
#   bgp dampening 1 1 1 1
#   network 198.51.110.10 mask 255.255.255.255 backdoor
#   aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
#   neighbor 198.51.100.1 activate
#   neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
#   neighbor 198.51.100.1 slow-peer detection threshold 150
#  exit-address-family
#  !
#  address-family ipv4 multicast
#   table-map test_tableMap filter
#   network 198.51.111.11 mask 255.255.255.255 route-map test
#   aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
#   default-metric 12
#   distance bgp 10 10 100
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family

- name: Gather listed AF BGP with provided configurations
  cisco.ios.ios_bgp_address_family:
    config:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#     address_family:
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.2.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       bgp:
#         aggregate_timer: 10
#         dampening:
#           max_suppress: 1
#           penalty_half_time: 1
#           reuse_route_val: 1
#           suppress_route_val: 1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       neighbors:
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 100
#               poi:
#                 igp_cost: true
#                 transitive: true
#         neighbor_address: 198.51.100.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       networks:
#       - address: 198.51.110.10
#         backdoor: true
#         mask: 255.255.255.255
#       snmp:
#         context:
#           community:
#             acl: '10'
#             ro: true
#             snmp_community: community
#           name: snmp_con
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.3.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       default_metric: 12
#       distance:
#         external: 10
#         internal: 10
#         local: 100
#       networks:
#       - address: 198.51.111.11
#         mask: 255.255.255.255
#         route_map: test
#       safi: multicast
#       table_map:
#         filter: true
#         name: test_tableMap
#     - afi: ipv4
#       bgp:
#         dampening:
#           max_suppress: 5
#           penalty_half_time: 1
#           reuse_route_val: 10
#           suppress_route_val: 100
#         dmzlink_bw: true
#         soft_reconfig_backup: true
#       safi: mdt
#     as_number: '65000'

# Using rendered

- name: Rendered the provided configuration with the existing running configuration
  cisco.ios.ios_bgp_address_family:
    config:
      as_number: 65000
      address_family:
        - afi: ipv4
          safi: multicast
          vrf: blue
          aggregate_address:
            - address: 192.0.2.1
              netmask: 255.255.255.255
              as_confed_set: true
          bgp:
            aggregate_timer: 10
            dampening:
              penalty_half_time: 1
              reuse_route_val: 1
              suppress_route_val: 1
              max_suppress: 1
            slow_peer:
              - detection:
                  threshold: 150
          neighbor:
            - address: 198.51.100.1
              aigp:
                send:
                  cost_community:
                    id: 100
                    poi:
                      igp_cost: true
                      transitive: true
              slow_peer:
                - detection:
                    threshold: 150
              remote_as: 10
              route_maps:
                - name: test-route
                  out: true
              route_server_client: true
          network:
            - address: 198.51.110.10
              mask: 255.255.255.255
              backdoor: true
          snmp:
            context:
              name: snmp_con
              community:
                snmp_community: community
                ro: true
                acl: 10
        - afi: ipv4
          safi: mdt
          bgp:
            dmzlink_bw: true
            dampening:
              penalty_half_time: 1
              reuse_route_val: 10
              suppress_route_val: 100
              max_suppress: 5
            soft_reconfig_backup: true
    state: rendered

# Task Output:
# ------------
#
# rendered:
# - router bgp 65000
# - address-family ipv4 multicast vrf blue
# - bgp aggregate-timer 10
# - bgp dampening 1 1 1 1
# - bgp slow-peer detection threshold 150
# - snmp context snmp_con community community ro 10
# - neighbor 198.51.100.1 remote-as 10
# - neighbor 198.51.100.1 aigp send cost-community 100 poi igp-cost transitive
# - neighbor 198.51.100.1 slow-peer detection threshold 150
# - network 198.51.110.10 mask 255.255.255.255 backdoor
# - aggregate-address 192.0.2.1 255.255.255.255 as-confed-set
# - address-family ipv4 mdt
# - bgp dmzlink-bw
# - bgp soft-reconfig-backup
# - bgp dampening 1 10 100 5

# Using parsed

# File: parsed.cfg
# ----------------
# router bgp 65000
#  bgp log-neighbor-changes
#  bgp nopeerup-delay cold-boot 20
#  !
#  address-family ipv4 multicast
#   table-map test_tableMap filter
#   network 1.1.1.1 mask 255.255.255.255 route-map test
#   aggregate-address 192.0.3.1 255.255.255.255 as-confed-set
#   default-metric 12
#   distance bgp 10 10 100
#  exit-address-family
#  !
#  address-family ipv4 mdt
#   bgp dampening 1 10 100 5
#   bgp dmzlink-bw
#   bgp soft-reconfig-backup
#  exit-address-family
#  !

- name: Parse the commands for provided configuration
  cisco.ios.ios_bgp_address_family:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------
#
# parsed:
#     address_family:
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.2.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       bgp:
#         aggregate_timer: 10
#         dampening:
#           max_suppress: 1
#           penalty_half_time: 1
#           reuse_route_val: 1
#           suppress_route_val: 1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       neighbors:
#       - activate: true
#         aigp:
#           send:
#             cost_community:
#               id: 100
#               poi:
#                 igp_cost: true
#                 transitive: true
#         neighbor_address: 198.51.100.1
#         slow_peer_options:
#           detection:
#             threshold: 150
#       networks:
#       - address: 198.51.110.10
#         backdoor: true
#         mask: 255.255.255.255
#       snmp:
#         context:
#           community:
#             acl: '10'
#             ro: true
#             snmp_community: community
#           name: snmp_con
#     - afi: ipv4
#       aggregate_addresses:
#       - address: 192.0.3.1
#         as_confed_set: true
#         netmask: 255.255.255.255
#       default_metric: 12
#       distance:
#         external: 10
#         internal: 10
#         local: 100
#       networks:
#       - address: 198.51.111.11
#         mask: 255.255.255.255
#         route_map: test
#       safi: multicast
#       table_map:
#         filter: true
#         name: test_tableMap
#     - afi: ipv4
#       bgp:
#         dampening:
#           max_suppress: 5
#           penalty_half_time: 1
#           reuse_route_val: 10
#           suppress_route_val: 100
#         dmzlink_bw: true
#         soft_reconfig_backup: true
#       safi: mdt
#     as_number: '65000'

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: `"This output will always be in the same format as the module argspec.\n"`
before dictionary	The configuration prior to the module execution. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `"This output will always be in the same format as the module argspec.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is `merged`, `replaced`, `overridden`, `deleted` or `purged` Sample: `["router bgp 65000", "address-family ipv4 multicast", "table-map test_tableMap filter", "network 1.1.1.1 mask 255.255.255.255 route-map test", "aggregate-address 192.0.3.1 255.255.255.255 as-confed-set"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["router bgp 65000", "address-family ipv4 multicast", "table-map test_tableMap filter", "network 1.1.1.1 mask 255.255.255.255 route-map test", "aggregate-address 192.0.3.1 255.255.255.255 as-confed-set"]`

Authors

Sagar Paul (@KB-perByte)
Sumit Jaiswal (@justjais)

cisco.ios.ios_bgp_address_family module – Resource module to configure BGP Address family.

Synopsis

Parameters

Notes

Examples

Return Values