cisco.ios.ios_ospfv2 module – Resource module to configure OSPFv2.

Note

This module is part of the cisco.ios collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospfv2.

New in cisco.ios 1.0.0

Synopsis

• This module configures and manages the Open Shortest Path First (OSPF) version 2 on IOS platforms.

Aliases: ospfv2

Parameters

Parameter	Comments
config dictionary	A dictionary of OSPF options.
processes list / elements=dictionary	List of OSPF instance configurations.
address_family dictionary	Router Address Family configuration mode
default boolean	Set a command to its defaults Choices: false true
snmp_context string	Modify snmp parameters Configure SNMP context name
topology dictionary	Associate the routing protocol to a topology instance
base boolean	Entering router topology sub mode Choices: false true
name string	Routing topology instance name
tid boolean	Configuring the routing protocol topology tid Note, please refer vendor documentation for valid values Choices: false true
adjacency dictionary	To configure control adjacency formation
max_adjacency integer	Maximum number of adjacencies allowed to be forming Please refer vendor documentation for valid values
min_adjacency integer	Initial number of adjacencies allowed to be forming in an area Please refer vendor documentation for valid values
none boolean	No initial Choices: false true
areas list / elements=dictionary	OSPF area parameters
area_id string	OSPF area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF area ID in IP address format(e.g. A.B.C.D)
authentication dictionary	Area authentication
enable boolean	Enable area authentication Choices: false true
message_digest boolean	Use IPsec authentication Choices: false true
capability boolean	Enable area specific capability Enable exclusion of links from base topology Choices: false true
default_cost integer	Set the summary default-cost of a NSSA/stub area Stub’s advertised external route metric Note, please refer vendor documentation for respective valid values
filter_list list / elements=dictionary	Filter networks between OSPF areas
direction string / required	The direction to apply on the filter networks sent to and from this area. Choices: "in" "out"
name string	Name of an IP prefix-list
nssa dictionary	Specify a NSSA area
default_information_originate dictionary	Originate Type 7 default into NSSA area
metric integer	OSPF default metric
metric_type integer	OSPF metric type for default routes OSPF Link State type Choices: 1 2
nssa_only boolean	Limit default advertisement to this NSSA area Choices: false true
no_ext_capability boolean	Do not send domain specific capabilities into NSSA Choices: false true
no_redistribution boolean	No redistribution into this NSSA area Choices: false true
no_summary boolean	Do not send summary LSA into NSSA Choices: false true
set boolean	Enable a NSSA area Choices: false true
translate string	Translate LSA Always translate LSAs on this ABR Suppress forwarding address in translated LSAs Choices: "always" "suppress-fa"
ranges list / elements=dictionary	Summarize routes matching address/mask (border routers only)
address string	IP address to match
advertise boolean	Advertise this range (default) Since, advertise when enabled is not shown in running-config idempotency won’t be maintained for the play in the second or next run of the play. Choices: false true
cost integer	User specified metric for this range
netmask string	IP mask for address
not_advertise boolean	DoNotAdvertise this range Choices: false true
sham_link dictionary	Define a sham link and its parameters
cost integer	Associate a cost with the sham-link Cost of the sham-link Note, please refer vendor documentation for respective valid values
destination string	IP addr associated with sham-link destination (A.B.C.D)
source string	IP addr associated with sham-link source (A.B.C.D)
ttl_security integer	TTL security check Maximum number of IP hops allowed
stub dictionary	Specify a stub area Backbone can not be configured as stub area
no_ext_capability boolean	Do not send domain specific capabilities into stub area Choices: false true
no_summary boolean	Do not send summary LSA into stub area Choices: false true
set boolean	Enable a stub area Choices: false true
auto_cost dictionary	Calculate OSPF interface cost according to bandwidth
reference_bandwidth integer	Use reference bandwidth method to assign OSPF cost Note, refer vendor documentation for respective valid values
set boolean	Enable OSPF auto-cost Choices: false true
bfd boolean	BFD configuration commands Enable BFD on all interfaces Choices: false true
capability dictionary	Enable specific OSPF feature
lls boolean	Link-local Signaling (LLS) support Choices: false true
opaque boolean	Opaque LSA Choices: false true
transit boolean	Transit Area Choices: false true
vrf_lite boolean	Do not perform PE specific checks Choices: false true
compatible dictionary	OSPF router compatibility list
rfc1583 boolean	compatible with RFC 1583 Choices: false true
rfc1587 boolean	compatible with RFC 1587 Choices: false true
rfc5243 boolean	supports DBD exchange optimization Choices: false true
default_information dictionary	Control distribution of default information
always boolean	Always advertise default route Choices: false true
metric integer	OSPF default metric Note, refer vendor documentation for respective valid values
metric_type integer	OSPF metric type for default routes Note, please refer vendor documentation for respective valid range
originate boolean	Distribute a default route Choices: false true
route_map string	Route-map reference name
default_metric integer	Set metric of redistributed routes
discard_route dictionary	Enable or disable discard-route installation
external integer	Discard route for redistributed summarised routes Administrative distance for redistributed summarised routes Note, please refer vendor documentation for respective valid range
internal integer	Discard route for summarised internal routes Administrative distance for summarised internal routes Note, please refer vendor documentation for respective valid range
set boolean	Enable discard-route installation Choices: false true
distance dictionary	Define an administrative distance
admin_distance dictionary	OSPF Administrative distance
acl string	Access-list name/number
address string	IP Source address
distance integer	Administrative distance
wildcard_bits string	Wildcard bits
ospf dictionary	OSPF distance
external integer	External type 5 and type 7 routes
inter_area integer	Inter-area routes
intra_area integer	Intra-area routes
distribute_list dictionary	Filter networks in routing updates
acls list / elements=dictionary	IP access list
direction string / required	Filter incoming and outgoing routing updates. Choices: "in" "out"
interface string	Interface configuration (GigabitEthernet A/B) Valid with incoming traffic
name string / required	IP access list name/number
protocol string	Protocol config (bgp 1). Valid with outgoing traffic
prefix dictionary	Filter prefixes in routing updates
direction string / required	Filter incoming and outgoing routing updates. Choices: "in" "out"
gateway_name string	Gateway name for filtering incoming updates based on gateway
interface string	Interface configuration (GigabitEthernet A/B) Valid with incoming traffic
name string / required	Name of an IP prefix-list
protocol string	Protocol config (bgp 1). Valid with outgoing traffic
route_map dictionary	Filter prefixes in routing updates
name string / required	Route-map name
domain_id dictionary	OSPF domain-id
ip_address dictionary	IP address
address string	OSPF domain ID in IP address format
secondary boolean	Secondary Domain-ID Choices: false true
null boolean	Null Domain-ID Choices: false true
domain_tag integer	OSPF domain-tag which is OSPF domain tag - 32-bit value Note, please refer vendor documentation for respective valid range
event_log dictionary	Event Logging
enable boolean	Enable event Logging Choices: false true
one_shot boolean	Disable Logging When Log Buffer Becomes Full Choices: false true
pause boolean	Pause Event Logging Choices: false true
size integer	Maximum Number of Events Stored in the Event Log Note, refer vendor documentation for respective valid values
help boolean	Description of the interactive help system Choices: false true
ignore boolean	Do not complain about specific event Do not complain upon receiving LSA of the specified type, MOSPF Type 6 LSA Choices: false true
interface_id boolean	Source of the interface ID SNMP MIB ifIndex Choices: false true
ispf boolean	Enable incremental SPF computation Choices: false true
limit dictionary	Limit a specific OSPF feature and LS update, DBD, and LS request retransmissions
dc dictionary	Demand circuit retransmissions
disable boolean	Disble the feature Choices: false true
number integer	The maximum number of retransmissions
non_dc dictionary	Non-demand-circuit retransmissions
disable boolean	Disble the feature Choices: false true
number integer	The maximum number of retransmissions
local_rib_criteria dictionary	Enable or disable usage of local RIB as route criteria
enable boolean	Enable usage of local RIB as route criteria Choices: false true
forwarding_address boolean	Local RIB used to validate external/NSSA forwarding addresses Choices: false true
inter_area_summary boolean	Local RIB used as criteria for inter-area summaries Choices: false true
nssa_translation boolean	Local RIB used as criteria for NSSA translation Choices: false true
log_adjacency_changes dictionary	Log changes in adjacency state
detail boolean	Log all state changes Choices: false true
set boolean	Log changes in adjacency state Choices: false true
max_lsa dictionary	Maximum number of non self-generated LSAs to accept
ignore_count integer	Maximum number of times adjacencies can be suppressed Note, refer vendor documentation for respective valid values
ignore_time integer	Number of minutes during which all adjacencies are suppressed Note, refer vendor documentation for respective valid values
number integer	Maximum number of non self-generated LSAs to accept Note, refer vendor documentation for respective valid values
reset_time integer	Number of minutes after which ignore-count is reset to zero Note, refer vendor documentation for respective valid values
threshold_value integer	Threshold value (%) at which to generate a warning msg Note, refer vendor documentation for respective valid values
warning_only boolean	Only give a warning message when limit is exceeded Choices: false true
max_metric dictionary	Set maximum metric
external_lsa integer	Override external-lsa metric with max-metric value Overriding metric in external-LSAs Note, refer vendor documentation for respective valid values
include_stub boolean	Set maximum metric for stub links in router-LSAs Choices: false true
on_startup dictionary	Set maximum metric temporarily after reboot
time integer	Time, in seconds, router-LSAs are originated with max-metric Note, please refer vendor documentation for respective valid range
wait_for_bgp boolean	Let BGP decide when to originate router-LSA with normal metric Choices: false true
router_lsa boolean / required	Maximum metric in self-originated router-LSAs Choices: false true
summary_lsa integer	Override summary-lsa metric with max-metric value Note, please refer vendor documentation for respective valid range
maximum_paths integer	Forward packets over multiple paths Number of paths
mpls dictionary	Configure MPLS routing protocol parameters
ldp dictionary	routing protocol commands for MPLS LDP
autoconfig dictionary	routing protocol commands for MPLS LDP
area string	Configure an OSPF area to run MPLS LDP
set boolean	Configure LDP automatic configuration and set the config Choices: false true
sync boolean	Configure LDP-IGP Synchronization Choices: false true
traffic_eng dictionary	Let BGP decide when to originate router-LSA with normal metric
area string	Configure an ospf area to run MPLS Traffic Engineering OSPF area ID as a decimal value or in IP address format
autoroute_exclude string	MPLS TE autoroute exclude Filter prefixes based on name of an IP prefix-list
interface dictionary	MPLS TE interface configuration for this OSPF process
area integer	Advertise MPLS TE information for this interface into area OSPF area ID as a decimal value
interface_type string	TE Interface configuration (GigabitEthernet A/B)
mesh_group dictionary	Traffic Engineering Mesh-Group advertisement
area string	configure flooding scope as area
id integer	Mesh Group Id
interface string	Interface configuration (GigabitEthernet A/B)
multicast_intact boolean	MPLS TE and PIM interaction Choices: false true
router_id_interface string	Router Interface configuration (GigabitEthernet A/B)
neighbor dictionary	Specify a neighbor router
address string	Neighbor address (A.B.C.D)
cost integer	OSPF cost for point-to-multipoint neighbor metric Note, please refer vendor documentation for respective valid range
database_filter boolean	Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor Filter all outgoing LSA Choices: false true
poll_interval integer	OSPF dead-router polling interval of non-broadcast neighbor in Seconds
priority integer	OSPF priority of non-broadcast neighbor priority
network list / elements=dictionary	Enable routing on an IP network
address string	Network number
area string	Set the OSPF area ID
wildcard_bits string	OSPF wild card bits
nsf dictionary	Non-stop forwarding
cisco dictionary	Cisco Non-stop forwarding
disable boolean	disable helper support Choices: false true
helper boolean	helper support Choices: false true
ietf dictionary	IETF graceful restart
disable boolean	disable helper support Choices: false true
helper boolean	helper support Choices: false true
strict_lsa_checking boolean	enable helper strict LSA checking Choices: false true
passive_interface string	Suppress routing updates on an interface (GigabitEthernet A/B) Interface name with respective interface number passive_interface param is DEPRECATED and a newer param passive_interfaces with added functionality’s is introduced, this attribute will be removed after 2026-07-18.
passive_interfaces dictionary	Suppress routing updates on an interface
default boolean	Suppress routing updates on all interfaces Choices: false true
interface dictionary	Suppress/Un-Suppress routing updates on interface
name list / elements=string	Name of interface (GigabitEthernet A/B)
set_interface boolean	Suppress/Un-Suppress routing updates Choices: false true
prefix_suppression boolean	Enable prefix suppression Choices: false true
priority integer	OSPF topology priority Note, refer vendor documentation for respective valid values
process_id integer / required	Process ID
queue_depth dictionary	Hello/Router process queue depth
hello dictionary	OSPF Hello process queue depth
max_packets integer	maximum number of packets in the queue
unlimited boolean	Unlimited queue depth Choices: false true
update dictionary	OSPF Router process queue depth
max_packets integer	maximum number of packets in the queue
unlimited boolean	Unlimited queue depth Choices: false true
router_id string	Router-id address for this OSPF process OSPF router-id in IP address format (A.B.C.D)
shutdown boolean	Shutdown the router process Choices: false true
summary_address dictionary	Configure IP address summaries
address string	IP summary address
mask string	IP Summary mask
not_advertise boolean	Do not advertise or translate Choices: false true
nssa_only boolean	Limit summary to NSSA areas Choices: false true
tag integer	Set tag
timers dictionary	Adjust routing timers
lsa integer	OSPF LSA timers, arrival timer The minimum interval in milliseconds between accepting the same LSA Note, refer vendor documentation for respective valid values
pacing dictionary	OSPF pacing timers
flood integer	OSPF flood pacing timer The minimum interval in msec to pace limit flooding on interface Note, refer vendor documentation for respective valid values
lsa_group integer	OSPF LSA group pacing timer Interval in sec between group of LSA being refreshed or maxaged Note, refer vendor documentation for respective valid values
retransmission integer	OSPF retransmission pacing timer The minimum interval in msec between neighbor retransmissions Note, refer vendor documentation for respective valid values
throttle dictionary	OSPF throttle timers
lsa dictionary	OSPF LSA throttle timers
first_delay integer	Delay to generate first occurrence of LSA in milliseconds Note, refer vendor documentation for respective valid values
max_delay integer	Maximum delay between originating the same LSA in milliseconds Note, refer vendor documentation for respective valid values
min_delay integer	Minimum delay between originating the same LSA in milliseconds Note, refer vendor documentation for respective valid values
spf dictionary	OSPF SPF throttle timers - Delay between receiving a change to SPF calculation in milliseconds - Note, refer vendor documentation for respective valid values
between_delay integer	Delay between first and second SPF calculation in milliseconds Note, refer vendor documentation for respective valid values
max_delay integer	Maximum wait time in milliseconds for SPF calculations Note, refer vendor documentation for respective valid values
receive_delay integer	Delay between receiving a change to SPF calculation in milliseconds Note, refer vendor documentation for respective valid values
traffic_share boolean	How to compute traffic share over alternate paths All traffic shared among min metric paths Use different interfaces for equal-cost paths Choices: false true
ttl_security dictionary	TTL security check
hops integer	Maximum number of IP hops allowed Note, refer vendor documentation for respective valid values
set boolean	Enable TTL Security on all interfaces Choices: false true
vrf string	Specify parameters for a VPN Routing/Forwarding instance
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^router ospf. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required. Choices: "merged" ← (default) "replaced" "overridden" "deleted" "gathered" "parsed" "rendered"

Notes

Note

• Tested against Cisco IOSXE Version 17.3 on CML.

• This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html

Examples

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router-ios#

- name: Merge provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          areas:
            - area_id: "5"
              capability: true
              authentication:
                enable: true
            - area_id: "10"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
              default_cost: 10
              filter_list:
                - name: test_prefix_in
                  direction: in
                - name: test_prefix_out
                  direction: out
          network:
            - address: 198.51.100.0
              wildcard_bits: 0.0.0.255
              area: 5
          default_information:
            originate: true
          passive_interfaces:
            default: true
            interface:
              set_interface: false
              name:
                - GigabitEthernet0/1
                - GigabitEthernet0/2
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.3.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
          areas:
            - area_id: "10"
              capability: true
          distribute_list:
            acls:
              - name: 10
                direction: out
              - name: 123
                direction: in
    state: merged

# Task Output:
# ------------

# before: {}
# commands:
#   - router ospf 200 vrf blue
#   - auto-cost reference-bandwidth 4
#   - domain-id 192.0.3.1
#   - max-metric router-lsa on-startup 100
#   - area 10 capability default-exclusion
#   - distribute-list 10 out
#   - distribute-list 123 in
#   - router ospf 1
#   - default-information originate
#   - max-metric router-lsa on-startup 110
#   - area 5 capability default-exclusion
#   - area 10 authentication message-digest
#   - area 10 default-cost 10
#   - area 10 nssa default-information-originate metric 10
#   - area 10 nssa translate type7 suppress-fa
#   - area 10 filter-list prefix test_prefix_in in
#   - area 10 filter-list prefix test_prefix_out out
#   - network 198.51.100.0 0.0.0.255 area 5
#   - passive-interface default
#   - no passive-interface GigabitEthernet0/1
#   - no passive-interface GigabitEthernet0/2

# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       passive_interfaces:
#         default: true
#         interface:
#           name:
#           - GigabitEthernet2
#           - GigabitEthernet1
#           set_interface: false
#       process_id: 1

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  passive-interface default
#  no passive-interface GigabitEthernet1
#  no passive-interface GigabitEthernet2
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  passive-interface default
#  no passive-interface GigabitEthernet1
#  no passive-interface GigabitEthernet2
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Replace running config with provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.4.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          maximum_paths: 15
          ttl_security:
            hops: 7
          areas:
            - area_id: "10"
              default_cost: 10
              authentication:
                message_digest: true
        - process_id: 100
          vrf: ospf_vrf
          domain_id:
            ip_address:
              address: 192.0.5.1
          auto_cost:
            reference_bandwidth: 5
          areas:
            - area_id: "5"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
    state: replaced

# Task Output:
# ------------
#
# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       passive_interfaces:
#         default: true
#         interface:
#           name:
#           - GigabitEthernet2
#           - GigabitEthernet1
#           set_interface: false
#       process_id: 1
#
# commands:
# - router ospf 100 vrf ospf_vrf
# - auto-cost reference-bandwidth 5
# - domain-id 192.0.5.1
# - area 5 authentication message-digest
# - area 5 nssa translate type7 suppress-fa
# - area 5 nssa default-information-originate metric 10
# - router ospf 200 vrf blue
# - no auto-cost reference-bandwidth 4
# - no distribute-list 10 out
# - no distribute-list 123 in
# - domain-id 192.0.4.1
# - max-metric router-lsa on-startup 200
# - maximum-paths 15
# - ttl-security all-interfaces hops 7
# - area 10 authentication message-digest
# - no area 10 capability default-exclusion
# - area 10 default-cost 10
#     ]
#
# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#       domain_id:
#         ip_address:
#           address: 192.0.4.1
#       max_metric:
#         on_startup:
#           time: 200
#         router_lsa: true
#       maximum_paths: 15
#       process_id: 200
#       ttl_security:
#         hops: 7
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100
#       vrf: ospf_vrf
#     - areas:
#       - area_id: '5'
#         authentication:
#           enable: true
#         capability: true
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: in
#           name: test_prefix_in
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 5 authentication
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Override provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.4.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          maximum_paths: 15
          ttl_security:
            hops: 7
          areas:
            - area_id: "10"
              default_cost: 10
              authentication:
                message_digest: true
        - process_id: 100
          vrf: ospf_vrf
          domain_id:
            ip_address:
              address: 192.0.5.1
          auto_cost:
            reference_bandwidth: 5
          areas:
            - area_id: "5"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
    state: overridden

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 1
# - router ospf 100 vrf ospf_vrf
# - auto-cost reference-bandwidth 5
# - domain-id 192.0.5.1
# - area 5 authentication message-digest
# - area 5 nssa translate type7 suppress-fa
# - area 5 nssa default-information-originate metric 10
# - router ospf 200 vrf blue
# - no auto-cost reference-bandwidth 4
# - no distribute-list 10 out
# - no distribute-list 123 in
# - domain-id 192.0.4.1
# - max-metric router-lsa on-startup 200
# - maximum-paths 15
# - ttl-security all-interfaces hops 7
# - area 10 authentication message-digest
# - no area 10 capability default-exclusion
# - area 10 default-cost 10
#
# after:
#     processes:
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#       domain_id:
#         ip_address:
#           address: 192.0.4.1
#       max_metric:
#         on_startup:
#           time: 200
#         router_lsa: true
#       maximum_paths: 15
#       process_id: 200
#       ttl_security:
#         hops: 7
#       vrf: blue
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100
#       vrf: ospf_vrf
#
# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete provided OSPF V2 processes
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
        - process_id: 200
          vrf: blue
    state: deleted

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 1
#
# processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#
# After state:
# ------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in

# Using deleted without any config passed (NOTE: This will delete all OSPFV2 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv2:
    state: deleted

# Task Output:
# ------------

# before:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1
#
# commands:
# - no router ospf 200 vrf blue
# - no router ospf 1
#
# after: {}
#
# After state:
# ------------
# router-ios#sh running-config | section ^router ospf
# router-ios#

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Gather OSPFV2 running configurations
  cisco.ios.ios_ospfv2:
    config:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#     processes:
#     - areas:
#       - area_id: '10'
#         capability: true
#       auto_cost:
#         reference_bandwidth: 4
#         set: true
#       distribute_list:
#         acls:
#         - direction: out
#           name: '10'
#         - direction: in
#           name: '123'
#       domain_id:
#         ip_address:
#           address: 192.0.3.1
#       max_metric:
#         on_startup:
#           time: 100
#         router_lsa: true
#       process_id: 200
#       vrf: blue
#     - areas:
#       - area_id: '10'
#         authentication:
#           message_digest: true
#         default_cost: 10
#         filter_list:
#         - direction: out
#           name: test_prefix_out
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       default_information:
#         originate: true
#       max_metric:
#         on_startup:
#           time: 110
#         router_lsa: true
#       network:
#       - address: 198.51.100.0
#         area: '5'
#         wildcard_bits: 0.0.0.255
#       process_id: 1


# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          areas:
            - area_id: "5"
              capability: true
              authentication:
                enable: true
            - area_id: "10"
              authentication:
                message_digest: true
              nssa:
                default_information_originate:
                  metric: 10
                translate: suppress-fa
              default_cost: 10
              filter_list:
                - name: test_prefix_in
                  direction: in
                - name: test_prefix_out
                  direction: out
          network:
            - address: 198.51.100.0
              wildcard_bits: 0.0.0.255
              area: 5
          default_information:
            originate: true
        - process_id: 200
          vrf: blue
          domain_id:
            ip_address:
              address: 192.0.3.1
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
          areas:
            - area_id: "10"
              capability: true
          distribute_list:
            acls:
              - name: 10
                direction: out
              - name: 123
                direction: in
    state: rendered

# Task Output:
# ------------

# rendered:
# - router ospf 200 vrf blue
# - auto-cost reference-bandwidth 4
# - distribute-list 10 out
# - distribute-list 123 in
# - domain-id 192.0.3.1
# - max-metric router-lsa on-startup 100
# - area 10 capability default-exclusion
# - router ospf 1
# - default-information originate
# - max-metric router-lsa on-startup 110
# - network 198.51.100.0 0.0.0.255 area 5
# - area 10 authentication message-digest
# - area 10 default-cost 10
# - area 10 nssa translate type7 suppress-fa
# - area 10 nssa default-information-originate metric 10
# - area 10 filter-list prefix test_prefix_out out
# - area 10 filter-list prefix test_prefix_in in
# - area 5 authentication
# - area 5 capability default-exclusion
#

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospf 100
#  auto-cost reference-bandwidth 5
#  domain-id 192.0.5.1
#  area 5 authentication message-digest
#  area 5 nssa translate type7 suppress-fa
#  area 5 nssa default-information-originate metric 10

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospfv2:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task Output:
# ------------

# parsed:
#     processes:
#     - areas:
#       - area_id: '5'
#         authentication:
#           message_digest: true
#         nssa:
#           default_information_originate:
#             metric: 10
#           translate: suppress-fa
#       auto_cost:
#         reference_bandwidth: 5
#         set: true
#       domain_id:
#         ip_address:
#           address: 192.0.5.1
#       process_id: 100

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
before dictionary	The configuration prior to the model invocation. Returned: always Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: ["router ospf 200 vrf blue", "auto-cost reference-bandwidth 5", "domain-id 192.0.4.1"]
gathered dictionary	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: "This output will always be in the same format as the module argspec.\n"
parsed dictionary	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: "This output will always be in the same format as the module argspec.\n"
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: ["router ospf 200 vrf blue", "auto-cost reference-bandwidth 4", "distribute-list 10 out"]

Authors

• Sumit Jaiswal (@justjais)

• Vinay M (@roverflow)

Collection links

• Issue Tracker
• Repository (Sources)