cisco.nxos.nxos_acls module – ACLs resource module

Note

This module is part of the cisco.nxos collection (version 8.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_acls.

New in cisco.nxos 1.0.0

Synopsis 

Manage named IP ACLs on the Cisco NX-OS platform

Aliases: acls

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of ACL options.
acls list / elements=dictionary	A list of the ACLs.
aces list / elements=dictionary	The entries within the ACL.
destination dictionary	Specify the packet destination.
address string	Destination network address.
any boolean	Any destination address. Choices: `false` `true`
host string	Host IP address.
port_protocol dictionary	Specify the destination port or protocol (only for TCP and UDP).
eq string	Match only packets on a given port number.
gt string	Match only packets with a greater port number.
lt string	Match only packets with a lower port number.
neq string	Match only packets not on a given port number.
range dictionary	Match only packets in the range of port numbers.
end string	Specify the end of the port range.
start string	Specify the start of the port range.
prefix string	Destination network prefix. Only for prefixes of value less than 31 for ipv4 and 127 for ipv6. Prefixes of 32 (ipv4) and 128 (ipv6) should be given in the ‘host’ key.
wildcard_bits string	Destination wildcard bits.
dscp string	Match packets with given DSCP value.
fragments boolean	Check non-initial fragments. Choices: `false` `true`
grant string	Action to be applied on the rule. Choices: `"permit"` `"deny"`
log boolean	Log matches against this entry. Choices: `false` `true`
precedence string	Match packets with given precedence value.
protocol string	Specify the protocol.
protocol_options dictionary	All possible suboptions for the protocol chosen.
icmp dictionary	ICMP protocol options.
administratively_prohibited boolean	Administratively prohibited Choices: `false` `true`
alternate_address boolean	Alternate address Choices: `false` `true`
conversion_error boolean	Datagram conversion Choices: `false` `true`
dod_host_prohibited boolean	Host prohibited Choices: `false` `true`
dod_net_prohibited boolean	Net prohibited Choices: `false` `true`
echo boolean	Echo (ping) Choices: `false` `true`
echo_reply boolean	Echo reply Choices: `false` `true`
echo_request boolean	Echo request (ping) Choices: `false` `true`
general_parameter_problem boolean	Parameter problem Choices: `false` `true`
host_isolated boolean	Host isolated Choices: `false` `true`
host_precedence_unreachable boolean	Host unreachable for precedence Choices: `false` `true`
host_redirect boolean	Host redirect Choices: `false` `true`
host_tos_redirect boolean	Host redirect for TOS Choices: `false` `true`
host_tos_unreachable boolean	Host unreachable for TOS Choices: `false` `true`
host_unknown boolean	Host unknown Choices: `false` `true`
host_unreachable boolean	Host unreachable Choices: `false` `true`
information_reply boolean	Information replies Choices: `false` `true`
information_request boolean	Information requests Choices: `false` `true`
mask_reply boolean	Mask replies Choices: `false` `true`
mask_request boolean	Mask requests Choices: `false` `true`
message_code integer	ICMP message code
message_type integer	ICMP message type
mobile_redirect boolean	Mobile host redirect Choices: `false` `true`
net_redirect boolean	Network redirect Choices: `false` `true`
net_tos_redirect boolean	Net redirect for TOS Choices: `false` `true`
net_tos_unreachable boolean	Network unreachable for TOS Choices: `false` `true`
net_unreachable boolean	Net unreachable Choices: `false` `true`
network_unknown boolean	Network unknown Choices: `false` `true`
no_room_for_option boolean	Parameter required but no room Choices: `false` `true`
option_missing boolean	Parameter required but not present Choices: `false` `true`
packet_too_big boolean	Fragmentation needed and DF set Choices: `false` `true`
parameter_problem boolean	All parameter problems Choices: `false` `true`
port_unreachable boolean	Port unreachable Choices: `false` `true`
precedence_unreachable boolean	Precedence cutoff Choices: `false` `true`
protocol_unreachable boolean	Protocol unreachable Choices: `false` `true`
reassembly_timeout boolean	Reassembly timeout Choices: `false` `true`
redirect boolean	All redirects Choices: `false` `true`
router_advertisement boolean	Router discovery advertisements Choices: `false` `true`
router_solicitation boolean	Router discovery solicitations Choices: `false` `true`
source_quench boolean	Source quenches Choices: `false` `true`
source_route_failed boolean	Source route failed Choices: `false` `true`
time_exceeded boolean	All time exceeded. Choices: `false` `true`
timestamp_reply boolean	Timestamp replies Choices: `false` `true`
timestamp_request boolean	Timestamp requests Choices: `false` `true`
traceroute boolean	Traceroute Choices: `false` `true`
ttl_exceeded boolean	TTL exceeded Choices: `false` `true`
unreachable boolean	All unreachables Choices: `false` `true`
icmpv6 dictionary	ICMPv6 protocol options.
beyond_scope boolean	Destination beyond scope. Choices: `false` `true`
destination_unreachable boolean	Destination address is unreachable. Choices: `false` `true`
echo_reply boolean	Echo reply. Choices: `false` `true`
echo_request boolean	Echo request (ping). Choices: `false` `true`
fragments boolean	Check non-initial fragments. Choices: `false` `true`
header boolean	Parameter header problem. Choices: `false` `true`
hop_limit boolean	Hop limit exceeded in transit. Choices: `false` `true`
mld_query boolean	Multicast Listener Discovery Query. Choices: `false` `true`
mld_reduction boolean	Multicast Listener Discovery Reduction. Choices: `false` `true`
mld_report boolean	Multicast Listener Discovery Report. Choices: `false` `true`
mldv2 boolean	Multicast Listener Discovery Protocol. Choices: `false` `true`
nd_na boolean	Neighbor discovery neighbor advertisements. Choices: `false` `true`
nd_ns boolean	Neighbor discovery neighbor solicitations. Choices: `false` `true`
next_header boolean	Parameter next header problems. Choices: `false` `true`
no_admin boolean	Administration prohibited destination. Choices: `false` `true`
no_route boolean	No route to destination. Choices: `false` `true`
packet_too_big boolean	Packet too big. Choices: `false` `true`
parameter_option boolean	Parameter option problems. Choices: `false` `true`
parameter_problem boolean	All parameter problems. Choices: `false` `true`
port_unreachable boolean	Port unreachable. Choices: `false` `true`
reassembly_timeout boolean	Reassembly timeout. Choices: `false` `true`
renum_command boolean	Router renumbering command. Choices: `false` `true`
renum_result boolean	Router renumbering result. Choices: `false` `true`
renum_seq_number boolean	Router renumbering sequence number reset. Choices: `false` `true`
router_advertisement boolean	Neighbor discovery router advertisements. Choices: `false` `true`
router_renumbering boolean	All router renumbering. Choices: `false` `true`
router_solicitation boolean	Neighbor discovery router solicitations. Choices: `false` `true`
telemetry_path boolean	IPT enabled. Choices: `false` `true`
telemetry_queue boolean	Flow of interest for BDC/HDC. Choices: `false` `true`
time_exceeded boolean	All time exceeded. Choices: `false` `true`
unreachable boolean	All unreachable. Choices: `false` `true`
igmp dictionary	IGMP protocol options.
dvmrp boolean	Distance Vector Multicast Routing Protocol Choices: `false` `true`
host_query boolean	Host Query Choices: `false` `true`
host_report boolean	Host Report Choices: `false` `true`
tcp dictionary	TCP flags.
ack boolean	Match on the ACK bit Choices: `false` `true`
established boolean	Match established connections Choices: `false` `true`
fin boolean	Match on the FIN bit Choices: `false` `true`
psh boolean	Match on the PSH bit Choices: `false` `true`
rst boolean	Match on the RST bit Choices: `false` `true`
syn boolean	Match on the SYN bit Choices: `false` `true`
urg boolean	Match on the URG bit Choices: `false` `true`
remark string	Access list entry comment.
sequence integer	Sequence number.
source dictionary	Specify the packet source.
address string	Source network address.
any boolean	Any source address. Choices: `false` `true`
host string	Host IP address.
port_protocol dictionary	Specify the destination port or protocol (only for TCP and UDP).
eq string	Match only packets on a given port number.
gt string	Match only packets with a greater port number.
lt string	Match only packets with a lower port number.
neq string	Match only packets not on a given port number.
range dictionary	Match only packets in the range of port numbers.
end string	Specify the end of the port range.
start string	Specify the start of the port range.
prefix string	Source network prefix. Only for prefixes of mask value less than 31 for ipv4 and 127 for ipv6. Prefixes of mask 32 (ipv4) and 128 (ipv6) should be given in the ‘host’ key.
wildcard_bits string	Source wildcard bits.
name string / required	Name of the ACL.
afi string / required	The Address Family Indicator (AFI) for the ACL. Choices: `"ipv4"` `"ipv6"`
running_config string	This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| section ‘ip(v6* access-list). The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in Choices: `"deleted"` `"gathered"` `"merged"` ← (default) `"overridden"` `"rendered"` `"replaced"` `"parsed"`

Notes 

Note

Tested against NX-OS 7.3.(0)D1(1) on VIRL
Unsupported for Cisco MDS
As NX-OS allows configuring a rule again with different sequence numbers, the user is expected to provide sequence numbers for the access control entries to preserve idempotency. If no sequence number is given, the rule will be added as a new rule by the device.

Examples 

# Using merged

# Before state:
# -------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'

- name: Merge provided ACLs configuration with device configuration
  cisco.nxos.nxos_acls:
    state: merged
    config:
      - afi: ipv4
        acls:
          - name: ACL1v4
            aces:
              - grant: deny
                destination:
                  address: 192.0.2.64
                  wildcard_bits: 0.0.0.255
                source:
                  any: true
                  port_protocol:
                    lt: 55
                protocol: tcp
                protocol_options:
                  tcp:
                    ack: true
                    fin: true
                sequence: 50

      - afi: ipv6
        acls:
          - name: ACL1v6
            aces:
              - grant: permit
                sequence: 10
                source:
                  any: true
                destination:
                  prefix: 2001:db8:12::/32
                protocol: sctp

# Task Output
# -----------
# before: []
#
# commands:
# - ip access-list ACL1v4
# - 50 deny tcp any lt 55 192.0.2.64 0.0.0.255 ack fin
# - ipv6 access-list ACL1v6
# - 10 permit sctp any 2001:db8:12::/32
#
# after:
#  - acls:
#    - aces:
#      - destination:
#          prefix: 2001:db8:12::/32
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      name: ACL1v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          address: 192.0.2.64
#          wildcard_bits: 0.0.0.255
#        grant: deny
#        protocol: tcp
#        protocol_options:
#          tcp:
#            ack: true
#            fin: true
#        sequence: 50
#        source:
#          any: true
#          port_protocol:
#            lt: '55'
#      name: ACL1v4
#    afi: ipv4


# After state:
# ------------
#
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#  50 deny tcp any lt 55 192.0.2.64 0.0.0.255 ack fin
# ipv6 access-list ACL1v6
#  10 permit sctp any any

# Using replaced

# Before state:
# ----------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#   10 permit ip any any
#   20 deny udp any any
# ip access-list ACL2v4
#   10 permit ahp 192.0.2.0 0.0.0.255 any
# ipv6 access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ipv6 access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

- name: Replace existing ACL configuration with provided configuration
  cisco.nxos.nxos_acls:
    config:
      - afi: ipv4
      - afi: ipv6
        acls:
          - name: ACL1v6
            aces:
              - sequence: 20
                grant: permit
                source:
                  any: true
                destination:
                  any: true
                protocol: pim

              - remark: Replaced ACE
          - name: ACL2v6
    state: replaced

# Task Output
# -----------
# before:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ip
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          any: true
#        grant: deny
#        protocol: udp
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v4
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ahp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.0.255
#      name: ACL2v4
#    afi: ipv4
#
# commands:
#  - no ip access-list ACL1v4
#  - no ip access-list ACL2v4
#  - ipv6 access-list ACL1v6
#  - no 10 permit sctp any any
#  - no 20 remark IPv6 ACL
#  - remark Replaced ACE
#  - 20 permit pim any any
#  - ipv6 access-list ACL2v6
#  - no 10 deny ipv6 any 2001:db8:3000::/36
#  - no 20 permit tcp host 2001:db8:2000:2::2 host 2001:db8:2000:ab::2
#
# after:
#  - acls:
#    - aces:
#      - remark: Replaced ACE
#        sequence: 10
#      - destination:
#          any: true
#        grant: permit
#        protocol: pim
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v6
#    - name: ACL2v6
#    afi: ipv6

# After state:
# ---------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ipv6 access-list ACL1v6
#   10 remark Replaced ACE
#   20 permit pim any any
# ipv6 access-list ACL2v6

# Using overridden

# Before state:
# ----------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#   10 permit ip any any
#   20 deny udp any any
# ip access-list ACL2v4
#   10 permit ahp 192.0.2.0 0.0.0.255 any
# ipv6 access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ipv6 access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

- name: Override existing configuration with provided configuration
  cisco.nxos.nxos_acls:
    config:
      - afi: ipv4
        acls:
          - name: NewACL
            aces:
              - grant: deny
                source:
                  address: 192.0.2.0
                  wildcard_bits: 0.0.255.255
                destination:
                  any: true
                protocol: eigrp
              - remark: Example for overridden state
    state: overridden

# Task Output
# -----------
#
# before:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#     - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ip
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          any: true
#        grant: deny
#        protocol: udp
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v4
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ahp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.0.255
#      name: ACL2v4
#    afi: ipv4
#
# commands:
#  - no ipv6 access-list ACL1v6
#  - no ipv6 access-list ACL2v6
#  - no ip access-list ACL1v4
#  - no ip access-list ACL2v4
#  - ip access-list NewACL
#  - deny eigrp 192.0.2.0 0.0.255.255 any
#  - remark Example for overridden state
#
# after:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: deny
#        protocol: eigrp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.255.255
#      - remark: Example for overridden state
#        sequence: 20
#      name: NewACL
#    afi: ipv4

# After state:
# ------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list NewACL
#   10 deny eigrp 192.0.2.0 0.0.255.255 any
#   20 remark Example for overridden state

# Using deleted - delete all
#
# Before state:
# -------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#   10 permit ip any any
#   20 deny udp any any
# ip access-list ACL2v4
#   10 permit ahp 192.0.2.0 0.0.0.255 any
# ip access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ip access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

- name: Delete all ACLs
  cisco.nxos.nxos_acls:
    state: deleted

# Task Output
# -----------
#
# before:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#     - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ip
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          any: true
#        grant: deny
#        protocol: udp
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v4
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ahp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.0.255
#      name: ACL2v4
#    afi: ipv4
#
# commands:
#  - no ip access-list ACL1v4
#  - no ip access-list ACL2v4
#  - no ipv6 access-list ACL1v6
#  - no ipv6 access-list ACL2v6
#
# after: []


# After state:
# -----------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
#

# Using deleted - delete AFI

# Before state:
# -------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#   10 permit ip any any
#   20 deny udp any any
# ip access-list ACL2v4
#   10 permit ahp 192.0.2.0 0.0.0.255 any
# ip access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ip access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

- name: Delete all ACLs in given AFI
  cisco.nxos.nxos_acls:
    config:
      - afi: ipv4
    state: deleted

# Task Output
# -----------
#
# before:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#     - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ip
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          any: true
#        grant: deny
#        protocol: udp
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v4
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ahp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.0.255
#      name: ACL2v4
#    afi: ipv4
#
# commands:
#  - no ip access-list ACL1v4
#  - no ip access-list ACL2v4
#
# after:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#     - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6

# After state:
# ------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ip access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

# Using deleted - delete ACLs

# Before state:
# -------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#   10 permit ip any any
#   20 deny udp any any
# ip access-list ACL2v4
#   10 permit ahp 192.0.2.0 0.0.0.255 any
# ipv6 access-list ACL1v6
#   10 permit sctp any any
#   20 remark IPv6 ACL
# ipv6 access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

- name: Delete specific ACLs
  cisco.nxos.nxos_acls:
    state: deleted
    config:
      - afi: ipv4
        acls:
          - name: ACL1v4
          - name: ACL2v4
      - afi: ipv6
        acls:
          - name: ACL1v6

# Task Output
# -----------
#
# before:
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: sctp
#        sequence: 10
#        source:
#          any: true
#      - remark: IPv6 ACL
#        sequence: 20
#      name: ACL1v6
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#     - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6
#  - acls:
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ip
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          any: true
#        grant: deny
#        protocol: udp
#        sequence: 20
#        source:
#          any: true
#      name: ACL1v4
#    - aces:
#      - destination:
#          any: true
#        grant: permit
#        protocol: ahp
#        sequence: 10
#        source:
#          address: 192.0.2.0
#          wildcard_bits: 0.0.0.255
#      name: ACL2v4
#    afi: ipv4
#
# commands:
#  - no ip access-list ACL1v4
#  - no ip access-list ACL2v4
#  - no ipv6 access-list ACL1v6
#
# after:
#  - acls:
#    - aces:
#      - destination:
#          prefix: 2001:db8:3000::/36
#        grant: deny
#        protocol: ipv6
#        sequence: 10
#        source:
#          any: true
#      - destination:
#          host: 2001:db8:2000:ab::2
#        grant: permit
#        protocol: tcp
#        sequence: 20
#        source:
#          host: 2001:db8:2000:2::2
#      name: ACL2v6
#    afi: ipv6

# After state:
# ------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ipv6 access-list ACL2v6
#  10 deny ipv6 any 2001:db8:3000::/36
#  20 permit tcp 2001:db8:2000:2::2/128 2001:db8:2000:ab::2/128

# Using parsed

- name: Parse given config to structured data
  cisco.nxos.nxos_acls:
    running_config: |
      ip access-list ACL1v4
        50 deny tcp any lt 55 192.0.2.64 0.0.0.255 ack fin
      ipv6 access-list ACL1v6
        10 permit sctp any any
    state: parsed

# Task Output
# ------------
#
# parsed:
# - afi: ipv4
#   acls:
#     - name: ACL1v4
#       aces:
#         - grant: deny
#           destination:
#             address: 192.0.2.64
#             wildcard_bits: 0.0.0.255
#           source:
#             any: true
#             port_protocol:
#               lt: 55
#           protocol: tcp
#           protocol_options:
#             tcp:
#               ack: true
#               fin: true
#           sequence: 50
#
# - afi: ipv6
#   acls:
#     - name: ACL1v6
#       aces:
#         - grant: permit
#           sequence: 10
#           source:
#             any: true
#           destination:
#             prefix: 2001:db8:12::/32
#           protocol: sctp


# Using gathered:

# Before state:
# ------------
# nxos-9k# show running-config | section '^ip(v6)* access-list'
# ip access-list ACL1v4
#  50 deny tcp any lt 55 192.0.2.64 0.0.0.255 ack fin
# ipv6 access-list ACL1v6
#  10 permit sctp any any

- name: Gather existing configuration
  cisco.nxos.nxos_acls:
    state: gathered

# Task Output
# -----------
#
# gathered:
# - afi: ipv4
#   acls:
#     - name: ACL1v4
#       aces:
#         - grant: deny
#           destination:
#             address: 192.0.2.64
#             wildcard_bits: 0.0.0.255
#           source:
#             any: true
#             port_protocol:
#               lt: 55
#           protocol: tcp
#           protocol_options:
#             tcp:
#               ack: true
#               fin: true
#           sequence: 50

# - afi: ipv6
#   acls:
#     - name: ACL1v6
#       aces:
#         - grant: permit
#           sequence: 10
#           source:
#             any: true
#           destination:
#             prefix: 2001:db8:12::/32
#           protocol: sctp


# Using rendered

- name: Render required configuration to be pushed to the device
  cisco.nxos.nxos_acls:
    config:
      - afi: ipv4
        acls:
          - name: ACL1v4
            aces:
              - grant: deny
                destination:
                  address: 192.0.2.64
                  wildcard_bits: 0.0.0.255
                source:
                  any: true
                  port_protocol:
                    lt: 55
                protocol: tcp
                protocol_options:
                  tcp:
                    ack: true
                    fin: true
                sequence: 50
      - afi: ipv6
        acls:
          - name: ACL1v6
            aces:
              - grant: permit
                sequence: 10
                source:
                  any: true
                destination:
                  prefix: '2001:db8:12::/32'
                protocol: sctp
    state: rendered


# Task Output
# -----------
#
# rendered:
#  ip access-list ACL1v4
#   50 deny tcp any lt 55 192.0.2.64 0.0.0.255 ack fin
#  ipv6 access-list ACL1v6
#   10 permit sctp any any

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration prior to the model invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["ip access-list ACL1v4", "10 permit ip any any precedence critical log", "20 deny tcp any lt smtp host 192.0.2.64 ack fin"]`
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is `gathered` Sample: `["This output will always be in the same format as the module argspec.\n"]`
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is `parsed` Sample: `["This output will always be in the same format as the module argspec.\n"]`
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is `rendered` Sample: `["ip access-list ACL1v4", "10 permit ip any any precedence critical log", "20 deny tcp any lt smtp host 192.0.2.64 ack fin"]`

Authors

Adharsh Srivats Rangarajan (@adharshsrivatsr)

cisco.nxos.nxos_acls module – ACLs resource module

Synopsis

Parameters

Notes

Examples

Return Values