cisco.nxos.nxos_pim_rp_address module – Manages configuration of an PIM static RP address instance.
Note
This module is part of the cisco.nxos collection (version 8.1.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_pim_rp_address
.
New in cisco.nxos 1.0.0
Synopsis
Manages configuration of an Protocol Independent Multicast (PIM) static rendezvous point (RP) address instance.
Aliases: pim_rp_address
Parameters
Parameter |
Comments |
---|---|
Group range is treated in PIM bidirectional mode. Choices:
|
|
Group range for static RP. Valid values are multicast addresses. |
|
Prefix list policy for static RP. Valid values are prefix-list policy names. |
|
Route map policy for static RP. Valid values are route-map policy names. |
|
Configures a Protocol Independent Multicast (PIM) static rendezvous point (RP) address. Valid values are unicast addresses. |
|
Specify desired state of the resource. Choices:
|
Notes
Note
Tested against NXOSv 7.3.(0)D1(1) on VIRL
Unsupported for Cisco MDS
state=absent
is currently not supported on all platforms.For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- cisco.nxos.nxos_pim_rp_address:
rp_address: 10.1.1.20
state: present
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
commands sent to the device Returned: always Sample: |