cisco.ucs.ucs_san_connectivity module – Configures SAN Connectivity Policies on Cisco UCS Manager

Note

This module is part of the cisco.ucs collection (version 1.14.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ucs. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ucs.ucs_san_connectivity.

Synopsis

  • Configures SAN Connectivity Policies on Cisco UCS Manager.

Requirements

The below requirements are needed on the host that executes this module.

  • ucsmsdk

Parameters

Parameter

Comments

description

aliases: descr

string

A description of the policy.

Cisco recommends including information about where and when to use the policy.

Enter up to 256 characters.

You can use any characters or spaces except the following:

` (accent mark), (backslash), ^ (carat), ” (double quote), = (equal sign), > (greater than), < (less than), or ‘ (single quote).

hostname

string / required

IP address or hostname of Cisco UCS Manager.

Modules can be used with the UCS Platform Emulator https://cs.co/ucspe

name

string

The name of the SAN Connectivity Policy.

This name can be between 1 and 16 alphanumeric characters.

You cannot use spaces or any special characters other than - (hyphen), “_” (underscore), : (colon), and . (period).

You cannot change this name after the policy is created.

org_dn

string

Org dn (distinguished name)

Default: "org-root"

password

string / required

Password for Cisco UCS Manager authentication.

port

integer

Port number to be used during connection (by default uses 443 for https and 80 for http connection).

proxy

string

If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’

state

string

If present, will verify SAN Connectivity Policies are present and will create if needed.

If absent, will verify SAN Connectivity Policies are absent and will delete if needed.

Choices:

  • "present" ← (default)

  • "absent"

use_proxy

boolean

If no, will not use the proxy as defined by system environment variable.

Choices:

  • false

  • true ← (default)

use_ssl

boolean

If no, an HTTP connection will be used instead of the default HTTPS connection.

Choices:

  • false

  • true ← (default)

username

string

Username for Cisco UCS Manager authentication.

Default: "admin"

vhba_list

list / elements=dictionary

List of vHBAs used by the SAN Connectivity Policy.

vHBAs used by the SAN Connectivity Policy must be created from a vHBA template.

adapter_policy

string

The name of the Fibre Channel adapter policy.

A user defined policy can be used, or one of the system defined policies (default, Linux, Solaris, VMware, Windows, WindowsBoot)

Default: "default"

name

string

The name of the virtual HBA (required).

order

string

String specifying the vHBA assignment order (e.g., ‘1’, ‘2’).

Default: "unspecified"

vhba_template

string

The name of the virtual HBA template (required).

wwnn_pool

string

Name of the WWNN pool to use for WWNN assignment.

Default: "default"

Examples

- name: Configure SAN Connectivity Policy
  cisco.ucs.ucs_san_connectivity:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: Cntr-FC-Boot
    wwnn_pool: WWNN-Pool
    vhba_list:
    - name: Fabric-A
      vhba_template: vHBA-Template-A
      adapter_policy: Linux
    - name: Fabric-B
      vhba_template: vHBA-Template-B
      adapter_policy: Linux

- name: Remove SAN Connectivity Policy
  cisco.ucs.ucs_san_connectivity:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: Cntr-FC-Boot
    state: absent

Authors

  • David Soper (@dsoper2)

  • John McDonough (@movinalot)

  • CiscoUcs (@CiscoUcs)