community.aws.batch_job_definition module – Manage AWS Batch Job Definitions
Note
This module is part of the community.aws collection (version 8.0.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.aws.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.batch_job_definition.
New in community.aws 1.0.0
Synopsis
This module allows the management of AWS Batch Job Definitions.
It is idempotent and supports “Check” mode.
Use module community.aws.batch_compute_environment to manage the compute environment, community.aws.batch_job_queue to manage job queues, community.aws.batch_job_definition to manage job definitions.
Prior to release 5.0.0 this module was called
community.aws.aws_batch_job_definition. The usage did not change.
Aliases: aws_batch_job_definition
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.26.0
botocore >= 1.29.0
Parameters
Parameter |
Comments |
|---|---|
AWS access key ID. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The aws_access_key and profile options are mutually exclusive. The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Retry strategy - The number of times to move a job to the RUNNABLE status. You may specify between 1 and 10 attempts. If attempts is greater than one, the job is retried if it fails until it has moved to RUNNABLE that many times. |
|
The location of a CA Bundle to use when validating SSL certificates. The |
|
A dictionary to modify the botocore configuration. Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. |
|
The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run. For more information, see https://docs.docker.com/engine/reference/builder/#cmd. Default: |
|
Use a The Choices:
|
|
URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS. The The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the –env option to docker run. Default: |
|
The name of the key value pair. For environment variables, this is the name of the environment variable. |
|
The value of the key value pair. For environment variables, this is the value of the environment variable. |
|
The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with |
|
The ARN for the job definition. |
|
The name for the job definition. |
|
The Amazon Resource Name (ARN) of the IAM role that the container can assume for AWS permissions. |
|
The hard limit (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. This parameter maps to Memory in the Create a container section of the Docker Remote API and the –memory option to docker run. |
|
The mount points for data volumes in your container. This parameter maps to Volumes in the Create a container section of the Docker Remote API and the –volume option to docker run. Default: |
|
The path on the container at which to mount the host volume. |
|
If this value is true , the container has read-only access to the volume; otherwise, the container can write to the volume. The default value is |
|
The name of the volume to mount. |
|
Default parameter substitution placeholders to set in the job definition. Parameters are specified as a key-value pair mapping. Parameters in a SubmitJob request override any corresponding parameter defaults from the job definition. |
|
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the –privileged option to docker run. |
|
A named AWS profile to use for authentication. See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html. The The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options. |
|
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the –read-only option to docker run. |
|
The AWS region to use. For global services such as IAM, Route53 and CloudFront, region is ignored. The See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region. The Support for the |
|
AWS secret access key. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The secret_key and profile options are mutually exclusive. The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
AWS STS session token for use with temporary credentials. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The security_token and profile options are mutually exclusive. Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0. The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Describes the desired state. Choices:
|
|
The type of job definition. |
|
A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the –ulimit option to docker run. Default: |
|
The hard limit for the ulimit type. |
|
The type of the ulimit. |
|
The soft limit for the ulimit type. |
|
The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the –user option to docker run. |
|
When set to Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead. Choices:
|
|
The number of vCPUs reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the –cpu-shares option to docker run. Each vCPU is equivalent to 1,024 CPU shares. |
|
A list of data volumes used in a job. Default: |
|
The contents of the host parameter determine whether your data volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume, but the data is not guaranteed to persist after the containers associated with it stop running. This is a dictionary with one property, sourcePath - The path on the host container instance that is presented to the container. If this parameter is empty,then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported. |
|
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints. |
Notes
Note
Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.
The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically
~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Examples
---
- name: My Batch Job Definition
community.aws.batch_job_definition:
job_definition_name: My Batch Job Definition
state: present
type: container
parameters:
Param1: Val1
Param2: Val2
image: <Docker Image URL>
vcpus: 1
memory: 512
command:
- python
- run_my_script.py
- arg1
job_role_arn: <Job Role ARN>
attempts: 3
register: job_definition_create_result
- name: show results
ansible.builtin.debug: var=job_definition_create_result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
returns what action was taken, whether something was changed, invocation and response Returned: always Sample: |