community.crypto.luks_device module – Manage encrypted (LUKS) devices

Note

This module is part of the community.crypto collection (version 2.22.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.crypto. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.crypto.luks_device.

Synopsis

• Module manages LUKS on given device. Supports creating, destroying, opening and closing of LUKS container and adding or removing new keys and passphrases.

Requirements

The below requirements are needed on the host that executes this module.

• cryptsetup

• wipefs (when state is absent)

• lsblk

• blkid (when label or uuid options are used)

Parameters

Parameter	Comments
allow_discards boolean added in community.crypto 2.17.0	Allow discards (also known as TRIM) requests for device. Will only be used when opening containers. Choices: false ← (default) true
cipher string added in community.crypto 1.1.0	This option allows the user to define the cipher specification string for the LUKS container. Will only be used on container creation. For pre-2.6.10 kernels, use aes-plain as they do not understand the new cipher spec strings. To use ESSIV, use aes-cbc-essiv:sha256.
device string	Device to work with (for example /dev/sda1). Needed in most cases. Can be omitted only when state=closed together with name is provided.
force_remove_last_key boolean	If set to true, allows removing the last key from a container. BEWARE that when the last key has been removed from a container, the container can no longer be opened! Choices: false ← (default) true
hash string added in community.crypto 1.1.0	This option allows the user to specify the hash function used in LUKS key setup scheme and volume key digest. Will only be used on container creation.
keyfile path	Used to unlock the container. Either a keyfile or a passphrase is needed for most of the operations. Parameter value is the path to the keyfile with the passphrase. BEWARE that working with keyfiles in plaintext is dangerous. Make sure that they are protected.
keysize integer added in community.crypto 1.0.0	Sets the key size only if LUKS container does not exist.
keyslot integer added in community.crypto 2.16.0	Adds the keyfile or passphrase to a specific keyslot when creating a new container on device. Parameter value is the number of the keyslot. Note that a device of type=luks1 supports the keyslot numbers 0-7 and a device of type=luks2 supports the keyslot numbers 0-31. In order to use the keyslots 8-31 when creating a new container, setting type to luks2 is required.
label string added in community.crypto 1.0.0	This option allow the user to create a LUKS2 format container with label support, respectively to identify the container by label on later usages. Will only be used on container creation, or when device is not specified. This cannot be specified if type is set to luks1.
name string	Sets container name when state=opened. Can be used instead of device when closing the existing container (that is, when state=closed).
new_keyfile path	Adds additional key to given container on device. Needs keyfile or passphrase option for authorization. LUKS container supports up to 8 keyslots. Parameter value is the path to the keyfile with the passphrase. NOTE that adding additional keys is idempotent only since community.crypto 1.4.0. For older versions, a new keyslot will be used even if another keyslot already exists for this keyfile. BEWARE that working with keyfiles in plaintext is dangerous. Make sure that they are protected.
new_keyslot integer added in community.crypto 2.16.0	Adds the additional new_keyfile or new_passphrase to a specific keyslot on the given device. Parameter value is the number of the keyslot. Note that a device of type=luks1 supports the keyslot numbers 0-7 and a device of type=luks2 supports the keyslot numbers 0-31.
new_passphrase string added in community.crypto 1.0.0	Adds additional passphrase to given container on device. Needs keyfile or passphrase option for authorization. LUKS container supports up to 8 keyslots. Parameter value is a string with the new passphrase. NOTE that adding additional passphrase is idempotent only since community.crypto 1.4.0. For older versions, a new keyslot will be used even if another keyslot already exists for this passphrase.
passphrase string added in community.crypto 1.0.0	Used to unlock the container. Either a passphrase or a keyfile is needed for most of the operations. Parameter value is a string with the passphrase.
pbkdf dictionary added in community.crypto 1.4.0	This option allows the user to configure the Password-Based Key Derivation Function (PBKDF) used. Will only be used on container creation, and when adding keys to an existing container.
algorithm string	The algorithm to use. Only available for the LUKS 2 format. Choices: "argon2i" "argon2id" "pbkdf2"
iteration_count integer	Specify the iteration count used for the PBKDF. Mutually exclusive with pbkdf.iteration_time.
iteration_time float	Specify the iteration time used for the PBKDF. Note that this is in seconds, not in milliseconds as on the command line. Mutually exclusive with pbkdf.iteration_count.
memory integer	The memory cost limit in kilobytes for the PBKDF. This is not used for PBKDF2, but only for the Argon PBKDFs.
parallel integer	The parallel cost for the PBKDF. This is the number of threads that run in parallel. This is not used for PBKDF2, but only for the Argon PBKDFs.
perf_no_read_workqueue boolean added in community.crypto 2.3.0	Allows the user to bypass dm-crypt internal workqueue and process read requests synchronously. Will only be used when opening containers. Choices: false ← (default) true
perf_no_write_workqueue boolean added in community.crypto 2.3.0	Allows the user to bypass dm-crypt internal workqueue and process write requests synchronously. Will only be used when opening containers. Choices: false ← (default) true
perf_same_cpu_crypt boolean added in community.crypto 2.3.0	Allows the user to perform encryption using the same CPU that IO was submitted on. The default is to use an unbound workqueue so that encryption work is automatically balanced between available CPUs. Will only be used when opening containers. Choices: false ← (default) true
perf_submit_from_crypt_cpus boolean added in community.crypto 2.3.0	Allows the user to disable offloading writes to a separate thread after encryption. There are some situations where offloading block write IO operations from the encryption threads to a single thread degrades performance significantly. The default is to offload block write IO operations to the same thread. Will only be used when opening containers. Choices: false ← (default) true
persistent boolean added in community.crypto 2.3.0	Allows the user to store options into container’s metadata persistently and automatically use them next time. Only perf_same_cpu_crypt, perf_submit_from_crypt_cpus, perf_no_read_workqueue, perf_no_write_workqueue, and allow_discards can be stored persistently. Will only work with LUKS2 containers. Will only be used when opening containers. Choices: false ← (default) true
remove_keyfile path	Removes given key from the container on device. Does not remove the keyfile from filesystem. Parameter value is the path to the keyfile with the passphrase. NOTE that removing keys is idempotent only since community.crypto 1.4.0. For older versions, trying to remove a key which no longer exists results in an error. NOTE that to remove the last key from a LUKS container, the force_remove_last_key option must be set to true. BEWARE that working with keyfiles in plaintext is dangerous. Make sure that they are protected.
remove_keyslot integer added in community.crypto 2.16.0	Removes the key in the given slot on device. Needs keyfile or passphrase for authorization. Note that a device of type=luks1 supports the keyslot numbers 0-7 and a device of type=luks2 supports the keyslot numbers 0-31. Note that the given keyfile or passphrase must not be in the slot to be removed.
remove_passphrase string added in community.crypto 1.0.0	Removes given passphrase from the container on device. Parameter value is a string with the passphrase to remove. NOTE that removing passphrases is idempotent only since community.crypto 1.4.0. For older versions, trying to remove a passphrase which no longer exists results in an error. NOTE that to remove the last keyslot from a LUKS container, the force_remove_last_key option must be set to true.
sector_size integer added in community.crypto 1.5.0	This option allows the user to specify the sector size (in bytes) used for LUKS2 containers. Will only be used on container creation.
state string	Desired state of the LUKS container. Based on its value creates, destroys, opens or closes the LUKS container on a given device. present will create LUKS container unless already present. Requires device and either keyfile or passphrase options to be provided. absent will remove existing LUKS container if it exists. Requires device or name to be specified. opened will unlock the LUKS container. If it does not exist it will be created first. Requires device and either keyfile or passphrase to be specified. Use the name option to set the name of the opened container. Otherwise the name will be generated automatically and returned as a part of the result. closed will lock the LUKS container. However if the container does not exist it will be created. Requires device and either keyfile or passphrase options to be provided. If container does already exist device or name will suffice. Choices: "present" ← (default) "absent" "opened" "closed"
type string added in community.crypto 1.0.0	This option allow the user explicit define the format of LUKS container that wants to work with. Options are luks1 or luks2 Choices: "luks1" "luks2"
uuid string added in community.crypto 1.0.0	With this option user can identify the LUKS container by UUID. Will only be used when device and label are not specified.

Attributes

Attribute	Support	Description
check_mode	Support: full	Can run in check_mode and return changed status prediction without modifying target.
diff_mode	Support: none	Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Examples

- name: Create LUKS container (remains unchanged if it already exists)
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    keyfile: "/vault/keyfile"

- name: Create LUKS container with a passphrase
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    passphrase: "foo"

- name: Create LUKS container with specific encryption
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    cipher: "aes"
    hash: "sha256"

- name: (Create and) open the LUKS container; name it "mycrypt"
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "opened"
    name: "mycrypt"
    keyfile: "/vault/keyfile"

- name: Close the existing LUKS container "mycrypt"
  community.crypto.luks_device:
    state: "closed"
    name: "mycrypt"

- name: Make sure LUKS container exists and is closed
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "closed"
    keyfile: "/vault/keyfile"

- name: Create container if it does not exist and add new key to it
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    keyfile: "/vault/keyfile"
    new_keyfile: "/vault/keyfile2"

- name: Add new key to the LUKS container (container has to exist)
  community.crypto.luks_device:
    device: "/dev/loop0"
    keyfile: "/vault/keyfile"
    new_keyfile: "/vault/keyfile2"

- name: Add new passphrase to the LUKS container
  community.crypto.luks_device:
    device: "/dev/loop0"
    keyfile: "/vault/keyfile"
    new_passphrase: "foo"

- name: Remove existing keyfile from the LUKS container
  community.crypto.luks_device:
    device: "/dev/loop0"
    remove_keyfile: "/vault/keyfile2"

- name: Remove existing passphrase from the LUKS container
  community.crypto.luks_device:
    device: "/dev/loop0"
    remove_passphrase: "foo"

- name: Completely remove the LUKS container and its contents
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "absent"

- name: Create a container with label
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    keyfile: "/vault/keyfile"
    label: personalLabelName

- name: Open the LUKS container based on label without device; name it "mycrypt"
  community.crypto.luks_device:
    label: "personalLabelName"
    state: "opened"
    name: "mycrypt"
    keyfile: "/vault/keyfile"

- name: Close container based on UUID
  community.crypto.luks_device:
    uuid: 03ecd578-fad4-4e6c-9348-842e3e8fa340
    state: "closed"
    name: "mycrypt"

- name: Create a container using luks2 format
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    keyfile: "/vault/keyfile"
    type: luks2

- name: Create a container with key in slot 4
  community.crypto.luks_device:
    device: "/dev/loop0"
    state: "present"
    keyfile: "/vault/keyfile"
    keyslot: 4

- name: Add a new key in slot 5
  community.crypto.luks_device:
    device: "/dev/loop0"
    keyfile: "/vault/keyfile"
    new_keyfile: "/vault/keyfile"
    new_keyslot: 5

- name: Remove the key from slot 4 (given keyfile must not be slot 4)
  community.crypto.luks_device:
    device: "/dev/loop0"
    keyfile: "/vault/keyfile"
    remove_keyslot: 4

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
name string	When state=opened returns (generated or given) name of LUKS container. Returns None if no name is supplied. Returned: success Sample: "luks-c1da9a58-2fde-4256-9d9f-6ab008b4dd1b"

Authors

• Jan Pokorny (@japokorn)

Collection links

• Issue Tracker
• Repository (Sources)
• Ask for help (crypto)
• Ask for help (ACME)
• Submit a bug report
• Request a feature
• Communication