f5networks.f5_modules.bigip_selfip module – Manage Self-IPs on a BIG-IP system

Note

This module is part of the f5networks.f5_modules collection (version 1.32.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_selfip.

New in f5networks.f5_modules 1.0.0

Synopsis

• Manage Self-IP addresses on a BIG-IP system.

Parameters

Parameter	Comments
address string	The IP addresses for the new self IP. This value is ignored upon update as addresses themselves cannot be changed after they are created. This value is required when creating new self IPs. IPv4 and IPv6 are supported.
allow_service list / elements=string	Configure port lockdown for the self IP. By default, the self IP has a “default deny” policy. This can be changed to allow TCP and UDP ports, as well as specific protocols. This list should contain protocol:port values.
description string	Description of the traffic selector.
fw_enforced_policy string added in f5networks.f5_modules 1.1.0	Specifies an AFM policy to attach to Self IP.
name string / required	The name of the self IP to create. If this parameter is not specified, it defaults to the value supplied in the address parameter.
netmask string	The netmask for the self IP. When creating a new self IP, this value is required.
partition string	Device partition to manage resources on. You can set different partitions for self IPs, but the address used may not match any other address used by a self IP. Thus, self IPs are not isolated by partitions as other resources on a BIG-IP are. Default: "Common"
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TELEMETRY_OFF. Previously used variable F5_TEEM is deprecated as its name was confusing. Choices: false ← (default) true
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable F5_PASSWORD.
server string / required	The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable F5_SERVER.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. Default: 443
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: "rest" ← (default)
user string / required	The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
validate_certs boolean	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS. Choices: false true ← (default)
route_domain integer	The route domain id of the system. When creating a new self IP, if this value is not specified, the default value is 0. This value cannot be changed after it is set.
state string	When present, guarantees the self IP exists with the provided attributes. When absent, removes the self IP from the system. Choices: "absent" "present" ← (default)
traffic_group string	The traffic group for the self IP addresses in an active-active, redundant load balancer configuration. When creating a new self IP, if this value is not specified, the default is /Common/traffic-group-local-only.
vlan string	The VLAN for the new self IPs. When creating a new self IP, this value is required.

Notes

Note

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create Self IP
  bigip_selfip:
    address: 10.10.10.10
    name: self1
    netmask: 255.255.255.0
    vlan: vlan1
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create Self IPv6
  bigip_selfip:
    address: fe80::10
    name: self2
    netmask: "ffff:ffff:ffff:ffff::"
    vlan: vlan1
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
    delegate_to: localhost

- name: Create Self IP with a Route Domain
  bigip_selfip:
    name: self1
    address: 10.10.10.10
    netmask: 255.255.255.0
    vlan: vlan1
    route_domain: 10
    allow_service: default
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Delete Self IP
  bigip_selfip:
    name: self1
    state: absent
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Allow management web UI to be accessed on this Self IP
  bigip_selfip:
    name: self1
    state: absent
    allow_service:
      - tcp:443
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Allow HTTPS and SSH access to this Self IP
  bigip_selfip:
    name: self1
    state: absent
    allow_service:
      - tcp:443
      - tcp:22
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Allow all services access to this Self IP
  bigip_selfip:
    name: self1
    state: absent
    allow_service:
      - all
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Allow only GRE and IGMP protocols access to this Self IP
  bigip_selfip:
    name: self1
    state: absent
    allow_service:
      - gre:0
      - igmp:0
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Allow all TCP, but no other protocols access to this Self IP
  bigip_selfip:
    name: self1
    state: absent
    allow_service:
      - tcp:0
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
address string	The address for the self IP. Returned: changed Sample: "192.0.2.10"
allow_service list / elements=string	Services that are allowed via this self IP. Returned: changed Sample: ["igmp:0", "tcp:22", "udp:53"]
fw_enforced_policy string	Specifies an AFM policy to be attached to the self IP. Returned: changed Sample: "/Common/afm-blocking-policy"
name string	The name of the self IP. Returned: created Sample: "self1"
netmask string	The netmask of the self IP. Returned: changed Sample: "255.255.255.0"
traffic_group string	The traffic group of which the self IP is a member. Returned: changed Sample: "traffic-group-local-only"
vlan string	The VLAN set on the self IP. Returned: changed Sample: "vlan1"

Authors

• Tim Rupp (@caphrim007)

• Wojciech Wypior (@wojtek0806)

Collection links

• Issue Tracker
• Homepage
• Repository (Sources)