ieisystem.inmanage.edit_ldisk module – Set logical disk
Note
This module is part of the ieisystem.inmanage collection (version 2.0.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install ieisystem.inmanage
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: ieisystem.inmanage.edit_ldisk
.
New in ieisystem.inmanage 1.0.0
Synopsis
Set logical disk on ieisystem Server.
Requirements
The below requirements are needed on the host that executes this module.
Python 3.7+
inManage
Parameters
Parameter |
Comments |
---|---|
Raid controller ID. |
|
Duration range is 1-255, physical drive under PMC raid controller. Required when option=LOC. Only the M6 model supports this parameter. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Logical disk ID. |
|
Set operation options for a logical disk. LOC is Locate Logical Drive, STL is Stop Locate LogicalDrive. FI is Fast Initialization, SFI is Slow/Full Initialization. SI is Stop Initialization, DEL is Delete LogicalDrive. Choices:
|
|
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
A dict object containing connection details. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
Notes
Note
Does not support
check_mode
.
Examples
- name: Edit ldisk test
hosts: inmanage
connection: local
gather_facts: false
vars:
inmanage:
host: "{{ ansible_ssh_host }}"
username: "{{ username }}"
password: "{{ password }}"
tasks:
- name: "Edit ldisk"
ieisystem.inmanage.edit_ldisk:
ctrl_id: 0
ldisk_id: 1
option: "LOC"
provider: "{{ inmanage }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Check to see if a change was made on the device. Returned: always |
|
Messages returned after module execution. Returned: always |
|
Status after module execution. Returned: always |