inspur.ispim.add_ldisk module – Create logical disk

Note

This module is part of the inspur.ispim collection (version 2.2.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install inspur.ispim. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: inspur.ispim.add_ldisk.

New in inspur.ispim 1.0.0

Synopsis 

Create logical disk on Inspur server.

Requirements 

The below requirements are needed on the host that executes this module.

Python 3.7+
inspursmsdk

Parameters 

Parameter	Comments
accelerator integer	Driver accelerator, 1 - 1h, 2 - 2h, 3 - 3h. Required when Info=None and controller type is PMC. Choices: `1` `2` `3`
access integer	Access Policy, 1 - Read Write, 2 - Read Only, 3 - Blocked. Required when Info=None and controller type is LSI. Choices: `1` `2` `3`
cache integer	Drive Cache, 1 - Unchanged, 2 - Enabled,3 - Disabled. Required when Info=None and controller type is LSI. Choices: `1` `2` `3`
ctrl_id integer	Raid controller ID. Required when Info=None and controller type is LSI,PMC or MV.
host string	Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
info string	Show controller and physical drive info. Choices: `"show"`
init integer	Init State, 1 - No Init, 2 - Quick Init, 3 - Full Init. Required when Info=None and controller type is LSI. Choices: `1` `2` `3`
io integer	IO Policy, 1 - Direct IO, 2 - Cached IO. Required when Info=None and controller type is LSI. Choices: `1` `2`
level integer	RAID Level, 0 - RAID0, 1 - RAID1, 5 - RAID5, 6 - RAID6, 10 - RAID10. Required when Info=None and controller type is LSI or PMC. Choices: `0` `1` `5` `6` `10`
password string	Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
provider dictionary	A dict object containing connection details.
host string	Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password string	Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
username string	Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
r integer	Read Policy, 1 - Read Ahead, 2 - No Read Ahead. Required when Info=None and controller type is LSI. Choices: `1` `2`
select integer	Select Size, from 1 to 100. Required when Info=None and controller type is LSI.
size integer	Strip Size, 0 - 32k, 1 - 64k, 2 - 128k, 3 - 256k, 4 - 512k, 5 - 1024k. Required when Info=None and controller type is LSI,PMC or MV. When the controller type is MV,size is [0, 1]. When the controller type is LSI or PMC,size is [1, 2, 3, 4, 5]. Choices: `0` `1` `2` `3` `4` `5`
slot list / elements=integer	Slot Num,input multiple slotNumber like 0,1,2…. Required when Info=None and controller type is LSI or PMC.
username string	Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
vname string	Virtual drive name. Required when Info=None and controller type is PMC or server model is M7. Required when Info=None and controller type is MV.
w integer	Write Policy, 1 - Write Through, 2 - Write Back, 3 - Write caching ok if bad BBU. Required when Info=None and controller type is LSI. Choices: `1` `2` `3`

Notes 

Note

Does not support check_mode.

Examples 

- name: Add ldisk test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Show pdisk information"
    inspur.ispim.add_ldisk:
      info: "show"
      provider: "{{ ism }}"

  - name: "Add LSI ldisk"
    inspur.ispim.add_ldisk:
      ctrl_id: 0
      level: 1
      size: 1
      access: 1
      r: 1
      w: 1
      io: 1
      cache: 1
      init: 2
      select: 10
      slot: 0,1
      provider: "{{ ism }}"

  - name: "Add PMC ldisk"
    inspur.ispim.add_ldisk:
      ctrl_id: 0
      level: 1
      size: 1
      accelerator: 1
      slot: 0,1
      vname: "test"
      provider: "{{ ism }}"

  - name: "Add MV ldisk"
    inspur.ispim.add_ldisk:
      ctrl_id: 0
      size: 1
      vname: "test"
      provider: "{{ ism }}"

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
changed boolean	Check to see if a change was made on the device. Returned: always
message string	Messages returned after module execution. Returned: always
state string	Status after module execution. Returned: always

Authors

WangBaoshan (@ispim)

inspur.ispim.add_ldisk module – Create logical disk

Synopsis

Requirements

Parameters

Notes

Examples

Return Values