junipernetworks.junos.junos_bgp_address_family module – Manage BGP Address Family attributes of interfaces on Junos devices.

Note

This module is part of the junipernetworks.junos collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_bgp_address_family.

New in junipernetworks.junos 1.3.0

Synopsis

  • Manage BGP Address Family attributes of interfaces on Junos network devices.

Aliases: bgp_address_family

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12.0)

Parameters

Parameter

Comments

config

dictionary

The provided link BGP address family dictionary.

address_family

list / elements=dictionary

Enable address family and enter its config mode.

af_type

list / elements=dictionary

Address family type for ipv4.

accepted_prefix_limit

dictionary

Specify limit for maximum number of prefixes accepted from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Specify teardown percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes accepted from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

add_path

dictionary

Advertise multiple paths to peer.

receive

boolean

Receive multiple paths from peer.

Choices:

  • false

  • true

send

dictionary

Send multiple paths to peer.

include_backup_path

integer

Specify number of backup paths to advertise.

multipath

boolean

Include only multipath contributor routes.

Choices:

  • false

  • true

path_count

integer / required

Include only multipath contributor routes.

path_selection_mode

dictionary

Configure how to select add-path routes.

all_paths

boolean

Advertise all paths allowed by path count.

Choices:

  • false

  • true

equal_cost_paths

boolean

Advertise equal cost paths.

Choices:

  • false

  • true

prefix_policy

string

Perform add-path only for prefixes that match policy.

aggregate_label

dictionary

Aggregate labels of incoming routes with the same FEC.

community

string

Community to identify the FEC of incoming routesC.

set

boolean

Set Aggregate labels of incoming routes with the same FEC

Choices:

  • false

  • true

aigp

dictionary

Allow sending and receiving of AIGP attribute.

disable

boolean

Dn not allow sending and receiving of AIGP attribute.

Choices:

  • false

  • true

set

boolean

Set AIGP.

Choices:

  • false

  • true

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

defer_initial_multipath_build

dictionary

Defer initial multipath build until EOR is received.

maximum_delay

integer

Max delay(sec) multipath build after peer is up.

set

boolean

Set defer initial multipath build.

Choices:

  • false

  • true

delay_route_advertisements

dictionary

Delay route updates for this family until FIB-sync.

max_delay_route_age

integer

Set max delay advertisement route age.

max_delay_routing_uptime

integer

Set max delay advertisement route age.

min_delay_inbound_convergence

integer

Set min delayadvertisement after source-peer sent all routes.

min_delay_routing_uptime

integer

Set min delay advertisement route age.

set

boolean

Set delay route advertisements.

Choices:

  • false

  • true

entropy_label

dictionary

Use entropy label for entropy label capable BGP LSPs.

import

string

Policy to select BGP LSPs to use entropy label.

no_next_hop_validation

boolean

Don’t validate next hop field against route next hop.

Choices:

  • false

  • true

set

boolean

Set entropy-label attribute.

Choices:

  • false

  • true

explicit_null

dictionary

Advertise explicit null.

connected_only

boolean

Advertise explicit null only for connected routes.

Choices:

  • false

  • true

set

boolean

Set explicit-null attribute.

Choices:

  • false

  • true

extended_nexthop

boolean

Enable extended nexthop encoding.

Choices:

  • false

  • true

extended_nexthop_color

boolean

Resolve using extended color nexthop.

Choices:

  • false

  • true

graceful_restart_forwarding_state_bit

string

Specify BGP graceful restart options.

Choices:

  • "from-fib"

  • "set"

legacy_redirect_ip_action

dictionary

Configure legacy redirect to IP support.

receive

boolean

Accept legacy encoded redirect-to-ip action attribute

Choices:

  • false

  • true

send

boolean

Advertise Redirect action as legacy redirect attribute.

Choices:

  • false

  • true

set

boolean

Set the legacy-redirect-ip-action.

Choices:

  • false

  • true

local_ipv4_address

string

Specify local IPv4 address.

loops

integer

Allow local AS in received AS paths.

no_install

boolean

Dont install received routes in forwarding.

Choices:

  • false

  • true

no_validate

string

Bypass validation procedure for routes that match policy.

output_queue_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

output_queue_priority_priority

integer

Output queue priority; higher is better.

per_group_label

boolean

Advertise prefixes with unique labels per group.

Choices:

  • false

  • true

per_prefix_label

boolean

Allocate a unique label to each advertised prefix.

Choices:

  • false

  • true

prefix_limit

dictionary

Limit maximum number of prefixes from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

resolve_vpn

boolean

Install received NLRI in inet.3 also.

Choices:

  • false

  • true

rib

string

Select table used by labeled unicast routes.

Choices:

  • "inet.3"

ribgroup_name

string

Name of the routing table group.

route_refresh_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

route_refresh_priority_priority

integer

Output queue priority; higher is better.

secondary_independent_resolution

boolean

Resolve FLOW routes in VRF table independent of VPN FLOW route.

Choices:

  • false

  • true

set

boolean

Set NLRI.

Choices:

  • false

  • true

strip_nexthop

boolean

Strip the next-hop from the outgoing flow update.

Choices:

  • false

  • true

topology

list / elements=dictionary

Multi topology routing tables.

community

list / elements=string

Community to identify multi topology routes.

name

string

Specify topology name.

traffic_statistics

dictionary

Collect statistics for BGP label-switched paths

file

dictionary

Statistics file options.

filename

string

Name of file in which to write trace information.

files

integer

Maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Maximum trace file size.

world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

interval

integer

Time to collect statistics (seconds).

labeled_path

boolean

Enable ingress labeled path statistics.

Choices:

  • false

  • true

set

boolean

Set traffic-statistics.

Choices:

  • false

  • true

type

string

Specify type of NLRI.

Choices:

  • "any"

  • "flow"

  • "labeled-unicast"

  • "multicast"

  • "segment-routing-te"

  • "unicast"

  • "signaling"

  • "auto-discovery-mspw"

  • "auto-discovery-only"

withdraw_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

withdraw_priority_priority

integer

Output queue priority; higher is better.

afi

string

address family.

Choices:

  • "evpn"

  • "inet"

  • "inet-mdt"

  • "inet-mvpn"

  • "inet-vpn"

  • "inet6"

  • "inet6-mvpn"

  • "inet6-vpn"

  • "iso-vpn"

  • "l2vpn"

  • "route-target"

  • "traffic-engineering"

groups

list / elements=dictionary

Specify address family config for groups.

address_family

list / elements=dictionary

Enable address family and enter its config mode.

af_type

list / elements=dictionary

Address family type for ipv4.

accepted_prefix_limit

dictionary

Specify limit for maximum number of prefixes accepted from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Specify teardown percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes accepted from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

add_path

dictionary

Advertise multiple paths to peer.

receive

boolean

Receive multiple paths from peer.

Choices:

  • false

  • true

send

dictionary

Send multiple paths to peer.

include_backup_path

integer

Specify number of backup paths to advertise.

multipath

boolean

Include only multipath contributor routes.

Choices:

  • false

  • true

path_count

integer / required

Include only multipath contributor routes.

path_selection_mode

dictionary

Configure how to select add-path routes.

all_paths

boolean

Advertise all paths allowed by path count.

Choices:

  • false

  • true

equal_cost_paths

boolean

Advertise equal cost paths.

Choices:

  • false

  • true

prefix_policy

string

Perform add-path only for prefixes that match policy.

aggregate_label

dictionary

Aggregate labels of incoming routes with the same FEC.

community

string

Community to identify the FEC of incoming routesC.

set

boolean

Set Aggregate labels of incoming routes with the same FEC

Choices:

  • false

  • true

aigp

dictionary

Allow sending and receiving of AIGP attribute.

disable

boolean

Dn not allow sending and receiving of AIGP attribute.

Choices:

  • false

  • true

set

boolean

Set AIGP.

Choices:

  • false

  • true

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

defer_initial_multipath_build

dictionary

Defer initial multipath build until EOR is received.

maximum_delay

integer

Max delay(sec) multipath build after peer is up.

set

boolean

Set defer initial multipath build.

Choices:

  • false

  • true

delay_route_advertisements

dictionary

Delay route updates for this family until FIB-sync.

max_delay_route_age

integer

Set max delay advertisement route age.

max_delay_routing_uptime

integer

Set max delay advertisement route age.

min_delay_inbound_convergence

integer

Set min delayadvertisement after source-peer sent all routes.

min_delay_routing_uptime

integer

Set min delay advertisement route age.

set

boolean

Set delay route advertisements.

Choices:

  • false

  • true

entropy_label

dictionary

Use entropy label for entropy label capable BGP LSPs.

import

string

Policy to select BGP LSPs to use entropy label.

no_next_hop_validation

boolean

Don’t validate next hop field against route next hop.

Choices:

  • false

  • true

set

boolean

Set entropy-label attribute.

Choices:

  • false

  • true

explicit_null

dictionary

Advertise explicit null.

connected_only

boolean

Advertise explicit null only for connected routes.

Choices:

  • false

  • true

set

boolean

Set explicit-null attribute.

Choices:

  • false

  • true

extended_nexthop

boolean

Enable extended nexthop encoding.

Choices:

  • false

  • true

extended_nexthop_color

boolean

Resolve using extended color nexthop.

Choices:

  • false

  • true

graceful_restart_forwarding_state_bit

string

Specify BGP graceful restart options.

Choices:

  • "from-fib"

  • "set"

legacy_redirect_ip_action

dictionary

Configure legacy redirect to IP support.

receive

boolean

Accept legacy encoded redirect-to-ip action attribute

Choices:

  • false

  • true

send

boolean

Advertise Redirect action as legacy redirect attribute.

Choices:

  • false

  • true

set

boolean

Set the legacy-redirect-ip-action.

Choices:

  • false

  • true

local_ipv4_address

string

Specify local IPv4 address.

loops

integer

Allow local AS in received AS paths.

no_install

boolean

Dont install received routes in forwarding.

Choices:

  • false

  • true

no_validate

string

Bypass validation procedure for routes that match policy.

output_queue_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

output_queue_priority_priority

integer

Output queue priority; higher is better.

per_group_label

boolean

Advertise prefixes with unique labels per group.

Choices:

  • false

  • true

per_prefix_label

boolean

Allocate a unique label to each advertised prefix.

Choices:

  • false

  • true

prefix_limit

dictionary

Limit maximum number of prefixes from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

resolve_vpn

boolean

Install received NLRI in inet.3 also.

Choices:

  • false

  • true

rib

string

Select table used by labeled unicast routes.

Choices:

  • "inet.3"

ribgroup_name

string

Name of the routing table group.

route_refresh_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

route_refresh_priority_priority

integer

Output queue priority; higher is better.

secondary_independent_resolution

boolean

Resolve FLOW routes in VRF table independent of VPN FLOW route.

Choices:

  • false

  • true

set

boolean

Set NLRI.

Choices:

  • false

  • true

strip_nexthop

boolean

Strip the next-hop from the outgoing flow update.

Choices:

  • false

  • true

topology

list / elements=dictionary

Multi topology routing tables.

community

list / elements=string

Community to identify multi topology routes.

name

string

Specify topology name.

traffic_statistics

dictionary

Collect statistics for BGP label-switched paths

file

dictionary

Statistics file options.

filename

string

Name of file in which to write trace information.

files

integer

Maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Maximum trace file size.

world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

interval

integer

Time to collect statistics (seconds).

labeled_path

boolean

Enable ingress labeled path statistics.

Choices:

  • false

  • true

set

boolean

Set traffic-statistics.

Choices:

  • false

  • true

type

string

Specify type of NLRI.

Choices:

  • "any"

  • "flow"

  • "labeled-unicast"

  • "multicast"

  • "segment-routing-te"

  • "unicast"

  • "signaling"

  • "auto-discovery-mspw"

  • "auto-discovery-only"

withdraw_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

withdraw_priority_priority

integer

Output queue priority; higher is better.

afi

string

address family.

Choices:

  • "evpn"

  • "inet"

  • "inet-mdt"

  • "inet-mvpn"

  • "inet-vpn"

  • "inet6"

  • "inet6-mvpn"

  • "inet6-vpn"

  • "iso-vpn"

  • "l2vpn"

  • "route-target"

  • "traffic-engineering"

name

string

Specify name of the group

neighbors

list / elements=dictionary

Specify address family config per neighbor.

address_family

list / elements=dictionary

Enable address family and enter its config mode.

af_type

list / elements=dictionary

Address family type for ipv4.

accepted_prefix_limit

dictionary

Specify limit for maximum number of prefixes accepted from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Specify teardown percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes accepted from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

add_path

dictionary

Advertise multiple paths to peer.

receive

boolean

Receive multiple paths from peer.

Choices:

  • false

  • true

send

dictionary

Send multiple paths to peer.

include_backup_path

integer

Specify number of backup paths to advertise.

multipath

boolean

Include only multipath contributor routes.

Choices:

  • false

  • true

path_count

integer / required

Include only multipath contributor routes.

path_selection_mode

dictionary

Configure how to select add-path routes.

all_paths

boolean

Advertise all paths allowed by path count.

Choices:

  • false

  • true

equal_cost_paths

boolean

Advertise equal cost paths.

Choices:

  • false

  • true

prefix_policy

string

Perform add-path only for prefixes that match policy.

aggregate_label

dictionary

Aggregate labels of incoming routes with the same FEC.

community

string

Community to identify the FEC of incoming routesC.

set

boolean

Set Aggregate labels of incoming routes with the same FEC

Choices:

  • false

  • true

aigp

dictionary

Allow sending and receiving of AIGP attribute.

disable

boolean

Dn not allow sending and receiving of AIGP attribute.

Choices:

  • false

  • true

set

boolean

Set AIGP.

Choices:

  • false

  • true

damping

boolean

Enable route flap damping.

Choices:

  • false

  • true

defer_initial_multipath_build

dictionary

Defer initial multipath build until EOR is received.

maximum_delay

integer

Max delay(sec) multipath build after peer is up.

set

boolean

Set defer initial multipath build.

Choices:

  • false

  • true

delay_route_advertisements

dictionary

Delay route updates for this family until FIB-sync.

max_delay_route_age

integer

Set max delay advertisement route age.

max_delay_routing_uptime

integer

Set max delay advertisement route age.

min_delay_inbound_convergence

integer

Set min delayadvertisement after source-peer sent all routes.

min_delay_routing_uptime

integer

Set min delay advertisement route age.

set

boolean

Set delay route advertisements.

Choices:

  • false

  • true

entropy_label

dictionary

Use entropy label for entropy label capable BGP LSPs.

import

string

Policy to select BGP LSPs to use entropy label.

no_next_hop_validation

boolean

Don’t validate next hop field against route next hop.

Choices:

  • false

  • true

set

boolean

Set entropy-label attribute.

Choices:

  • false

  • true

explicit_null

dictionary

Advertise explicit null.

connected_only

boolean

Advertise explicit null only for connected routes.

Choices:

  • false

  • true

set

boolean

Set explicit-null attribute.

Choices:

  • false

  • true

extended_nexthop

boolean

Enable extended nexthop encoding.

Choices:

  • false

  • true

extended_nexthop_color

boolean

Resolve using extended color nexthop.

Choices:

  • false

  • true

graceful_restart_forwarding_state_bit

string

Specify BGP graceful restart options.

Choices:

  • "from-fib"

  • "set"

legacy_redirect_ip_action

dictionary

Configure legacy redirect to IP support.

receive

boolean

Accept legacy encoded redirect-to-ip action attribute

Choices:

  • false

  • true

send

boolean

Advertise Redirect action as legacy redirect attribute.

Choices:

  • false

  • true

set

boolean

Set the legacy-redirect-ip-action.

Choices:

  • false

  • true

local_ipv4_address

string

Specify local IPv4 address.

loops

integer

Allow local AS in received AS paths.

no_install

boolean

Dont install received routes in forwarding.

Choices:

  • false

  • true

no_validate

string

Bypass validation procedure for routes that match policy.

output_queue_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

output_queue_priority_priority

integer

Output queue priority; higher is better.

per_group_label

boolean

Advertise prefixes with unique labels per group.

Choices:

  • false

  • true

per_prefix_label

boolean

Allocate a unique label to each advertised prefix.

Choices:

  • false

  • true

prefix_limit

dictionary

Limit maximum number of prefixes from a peer.

forever

boolean

Idle the peer until the user intervenes.

Choices:

  • false

  • true

idle_timeout

boolean

Set idle timeout node.

Choices:

  • false

  • true

idle_timeout_value

integer

Specify timeout before attempting to restart peer.

limit_threshold

integer

Percentage of prefix-limit to start warnings.

maximum

integer

Specify maximum number of prefixes from a peer.

teardown

boolean

Clear peer connection on reaching limit.

Choices:

  • false

  • true

resolve_vpn

boolean

Install received NLRI in inet.3 also.

Choices:

  • false

  • true

rib

string

Select table used by labeled unicast routes.

Choices:

  • "inet.3"

ribgroup_name

string

Name of the routing table group.

route_refresh_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

route_refresh_priority_priority

integer

Output queue priority; higher is better.

secondary_independent_resolution

boolean

Resolve FLOW routes in VRF table independent of VPN FLOW route.

Choices:

  • false

  • true

set

boolean

Set NLRI.

Choices:

  • false

  • true

strip_nexthop

boolean

Strip the next-hop from the outgoing flow update.

Choices:

  • false

  • true

topology

list / elements=dictionary

Multi topology routing tables.

community

list / elements=string

Community to identify multi topology routes.

name

string

Specify topology name.

traffic_statistics

dictionary

Collect statistics for BGP label-switched paths

file

dictionary

Statistics file options.

filename

string

Name of file in which to write trace information.

files

integer

Maximum number of trace files.

no_world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

size

integer

Maximum trace file size.

world_readable

boolean

Don’t allow any user to read the log file.

Choices:

  • false

  • true

interval

integer

Time to collect statistics (seconds).

labeled_path

boolean

Enable ingress labeled path statistics.

Choices:

  • false

  • true

set

boolean

Set traffic-statistics.

Choices:

  • false

  • true

type

string

Specify type of NLRI.

Choices:

  • "any"

  • "flow"

  • "labeled-unicast"

  • "multicast"

  • "segment-routing-te"

  • "unicast"

  • "signaling"

  • "auto-discovery-mspw"

  • "auto-discovery-only"

withdraw_priority_expedited

boolean

Expedited queue; highest priority.

Choices:

  • false

  • true

withdraw_priority_priority

integer

Output queue priority; higher is better.

afi

string

address family.

Choices:

  • "evpn"

  • "inet"

  • "inet-mdt"

  • "inet-mvpn"

  • "inet-vpn"

  • "inet6"

  • "inet6-mvpn"

  • "inet6-vpn"

  • "iso-vpn"

  • "l2vpn"

  • "route-target"

  • "traffic-engineering"

neighbor_address

string

Specify neighbor address.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the Junos device by executing the command show protocols bgp.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result

state

string

The state the configuration should be left in.

State deleted only removes BGP address family attributes that this modules manages and does not negate the BGP neighbor address family completely. Thereby, preserving address-family related configurations under BGP group neighbor context.

To delete the address family associated to neighbor use junipernetworks.junos.junos_bgp_neighbor_address_family modules for prior cleanup.

Refer to examples for more details.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "parsed"

  • "gathered"

  • "rendered"

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.

  • This module works with connection netconf. See the Junos OS Platform Options.

  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state
# ------------
#
# admin# show protocols bgp
#
# [edit]

- name: Merge Junos BGP address family configuration
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 98
                idle_timeout_value: 2001
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
        - afi: 'inet'
          af_type:
            - type: 'flow'
              legacy_redirect_ip_action:
                send: true
                receive: true
              loops: 4
              no_install: true
              output_queue_priority_expedited: true
              secondary_independent_resolution: true

            - type: 'unicast'
              extended_nexthop: true
              extended_nexthop_color: true
              local_ipv4_address: '9.9.9.9'

            - type: 'labeled-unicast'
              entropy_label:
                no_next_hop_validation: true
              explicit_null:
                connected_only: true
              per_prefix_label: true
              per_group_label: true
              prefix_limit:
                maximum: 20
                limit_threshold: 99
                forever: true
              resolve_vpn: true
              rib: 'inet.3'
              route_refresh_priority_expedited: true
              route_refresh_priority_priority: 3

            - type: 'any'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 99
                idle_timeout_value: 2000
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              graceful_restart_forwarding_state_bit: 'from-fib'
    state: merged

# Task Output:
# ------------
#
# before: {}
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp><nc:family><nc:evpn><nc:signaling>
#   <nc:accepted-prefix-limit><nc:maximum>20</nc:maximum><nc:teardown><nc:limit-threshold>98</nc:limit-threshold>
#   <nc:idle-timeout><nc:timeout>2001</nc:timeout></nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit>
#   <nc:damping/><nc:defer-initial-multipath-build><nc:maximum-delay>2</nc:maximum-delay>
#   </nc:defer-initial-multipath-build></nc:signaling></nc:evpn><nc:inet><nc:flow><nc:legacy-redirect-ip-action>
#   <nc:send/><nc:receive/></nc:legacy-redirect-ip-action><nc:loops>4</nc:loops><nc:no-install/>
#   <nc:output-queue-priority><nc:expedited/></nc:output-queue-priority><nc:secondary-independent-resolution/>
#   </nc:flow><nc:unicast><nc:extended-nexthop/><nc:extended-nexthop-color/><nc:local-ipv4-address>9.9.9.9</nc:local-ipv4-address>
#   </nc:unicast><nc:labeled-unicast><nc:entropy-label><nc:no-next-hop-validation/></nc:entropy-label>
#   <nc:explicit-null><nc:connected-only/></nc:explicit-null><nc:per-prefix-label/><nc:per-group-label/>
#   <nc:prefix-limit><nc:maximum>20</nc:maximum><nc:teardown>99<nc:idle-timeout><nc:forever/></nc:idle-timeout>
#   </nc:teardown></nc:prefix-limit><nc:resolve-vpn/><nc:rib><nc:inet.3/></nc:rib><nc:route-refresh-priority>
#   <nc:expedited/><nc:priority>3</nc:priority></nc:route-refresh-priority></nc:labeled-unicast><nc:any>
#   <nc:accepted-prefix-limit><nc:maximum>20</nc:maximum><nc:teardown><nc:limit-threshold>99</nc:limit-threshold>
#   <nc:idle-timeout><nc:timeout>2000</nc:timeout></nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit>
#   <nc:damping/><nc:defer-initial-multipath-build><nc:maximum-delay>2</nc:maximum-delay></nc:defer-initial-multipath-build>
#   <nc:delay-route-advertisements><nc:maximum-delay><nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime>
#   </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence>
#   <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements><nc:graceful-restart>
#   <nc:forwarding-state-bit>from-fib</nc:forwarding-state-bit></nc:graceful-restart></nc:any></nc:inet></nc:family>
#   </nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>
#
# after:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet

# After state
# -----------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

#
# Using replaced
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# bgp-error-tolerance {
#     malformed-route-limit 40000000;
# }
# authentication-algorithm md5;
# advertise-bgp-static {
#     policy static-to-bgp;
# }
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Replace existing Junos BGP address family config with provided config
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 21
                limit_threshold: 99
                idle_timeout_value: 2002
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              damping: true
    state: replaced

# Task Output:
# ------------
#
#  before:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp><nc:family>
#   <nc:evpn delete="delete"/></nc:family><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit>
#   <nc:maximum>21</nc:maximum><nc:teardown><nc:limit-threshold>99</nc:limit-threshold><nc:idle-timeout>
#   <nc:timeout>2002</nc:timeout></nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/>
#   <nc:delay-route-advertisements><nc:maximum-delay><nc:route-age>20</nc:route-age>
#   <nc:routing-uptime>32000</nc:routing-uptime></nc:maximum-delay><nc:minimum-delay>
#   <nc:inbound-convergence>32000</nc:inbound-convergence><nc:routing-uptime>23000</nc:routing-uptime>
#   </nc:minimum-delay></nc:delay-route-advertisements></nc:signaling></nc:evpn></nc:family></nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>
#
# after:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2002
#         limit_threshold: 99
#         maximum: 21
#       damping: true
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet
#
# After state
# -----------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 21;
#             teardown 99 idle-timeout 2002;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#     }
# }

# Using overridden
#
# Before state
# ------------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Override Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 21
                limit_threshold: 99
                idle_timeout_value: 2002
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              damping: true
    state: overridden

# Task Output:
# ------------
#
# before:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2002
#         limit_threshold: 99
#         maximum: 21
#       damping: true
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp><nc:family>
#   <nc:evpn delete="delete"/><nc:inet delete="delete"/></nc:family><nc:family><nc:evpn delete="delete"/>
#   </nc:family><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit><nc:maximum>21</nc:maximum>
#   <nc:teardown><nc:limit-threshold>99</nc:limit-threshold><nc:idle-timeout><nc:timeout>2002</nc:timeout>
#   </nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/><nc:delay-route-advertisements>
#   <nc:maximum-delay><nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime>
#   </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence>
#   <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements>
#   </nc:signaling></nc:evpn></nc:family></nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>
#
# After state
# -----------
#
# admin# show protocols bgp
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 21;
#             teardown 99 idle-timeout 2002;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#     }
# }

# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# preference 2;
# hold-time 5;
# advertise-inactive;
# out-delay 10;
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Delete Junos BGP address family config based on the afi
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'inet'
    state: deleted

# Task Output:
# ------------
#
# before:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet
#
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:bgp>
#   <nc:family><nc:inet delete="delete"/></nc:family></nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>
#
# after:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#
# After state
# -----------
#
# admin# show protocols bgp
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

# Using deleted
#
# Before state
# ------------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Delete complete Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
    config:
    state: deleted

# Task Output:
# ------------
#
# before:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet
# commands:
# - <nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#   <nc:bgp><nc:family><nc:evpn delete="delete"/><nc:inet delete="delete"/>
#   </nc:family></nc:bgp></nc:protocols>
# - <nc:routing-options xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>
#
# after: {}

# After state
# -----------
#
# admin# show protocols bgp
#

# Using gathered
#
# Before state
# ------------
#
# admin# show protocols bgp
# family inet {
#     unicast {
#         local-ipv4-address 9.9.9.9;
#         extended-nexthop;
#         extended-nexthop-color;
#     }
#     flow {
#         loops 4;
#         no-install;
#         output-queue-priority expedited;
#         legacy-redirect-ip-action {
#             receive;
#             send;
#         }
#         secondary-independent-resolution;
#     }
#     any {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout 2000;
#         }
#         damping;
#         delay-route-advertisements {
#             minimum-delay {
#                 routing-uptime 23000;
#                 inbound-convergence 32000;
#             }
#             maximum-delay {
#                 route-age 20;
#                 routing-uptime 32000;
#             }
#         }
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#         graceful-restart {
#             forwarding-state-bit from-fib;
#         }
#     }
#     labeled-unicast {
#         prefix-limit {
#             maximum 20;
#             teardown 99 idle-timeout forever;
#         }
#         route-refresh-priority priority 3;
#         per-prefix-label;
#         per-group-label;
#         rib {
#             inet.3;
#         }
#         explicit-null connected-only;
#         resolve-vpn;
#         entropy-label {
#             no-next-hop-validation;
#         }
#     }
# }
# family evpn {
#     signaling {
#         accepted-prefix-limit {
#             maximum 20;
#             teardown 98 idle-timeout 2001;
#         }
#         damping;
#         defer-initial-multipath-build {
#             maximum-delay 2;
#         }
#     }
# }

- name: Gather Junos BGP address family config
  junipernetworks.junos.junos_bgp_address_family:
    config:
    state: gathered
#
#
# Task Output:
# ------------
#
# gathered:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet

# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <protocols>
#             <bgp>
#                 <preference>2</preference>
#                 <hold-time>5</hold-time>
#                 <advertise-inactive/>
#                 <out-delay>10</out-delay>
#                 <family>
#                     <inet>
#                         <unicast>
#                             <local-ipv4-address>9.9.9.9</local-ipv4-address>
#                             <extended-nexthop/>
#                             <extended-nexthop-color/>
#                         </unicast>
#                         <flow>
#                             <loops>
#                                 <loops>4</loops>
#                             </loops>
#                             <no-install/>
#                             <output-queue-priority>
#                                 <expedited/>
#                             </output-queue-priority>
#                             <legacy-redirect-ip-action>
#                                 <receive/>
#                                 <send/>
#                             </legacy-redirect-ip-action>
#                             <secondary-independent-resolution/>
#                         </flow>
#                         <any>
#                             <accepted-prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>99</limit-threshold>
#                                     <idle-timeout>
#                                         <timeout>2000</timeout>
#                                     </idle-timeout>
#                                 </teardown>
#                             </accepted-prefix-limit>
#                             <damping/>
#                             <delay-route-advertisements>
#                                 <minimum-delay>
#                                     <routing-uptime>23000</routing-uptime>
#                                     <inbound-convergence>32000</inbound-convergence>
#                                 </minimum-delay>
#                                 <maximum-delay>
#                                     <route-age>20</route-age>
#                                     <routing-uptime>32000</routing-uptime>
#                                 </maximum-delay>
#                             </delay-route-advertisements>
#                             <defer-initial-multipath-build>
#                                 <maximum-delay>2</maximum-delay>
#                             </defer-initial-multipath-build>
#                             <graceful-restart>
#                                 <forwarding-state-bit>from-fib</forwarding-state-bit>
#                             </graceful-restart>
#                         </any>
#                         <labeled-unicast>
#                             <prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>99</limit-threshold>
#                                     <idle-timeout>
#                                         <forever/>
#                                     </idle-timeout>
#                                 </teardown>
#                             </prefix-limit>
#                             <route-refresh-priority>
#                                 <priority>3</priority>
#                             </route-refresh-priority>
#                             <per-prefix-label/>
#                             <per-group-label/>
#                             <rib>
#                                 <inet.3/>
#                             </rib>
#                             <explicit-null>
#                                 <connected-only/>
#                             </explicit-null>
#                             <resolve-vpn/>
#                             <entropy-label>
#                                 <no-next-hop-validation/>
#                             </entropy-label>
#                         </labeled-unicast>
#                     </inet>
#                     <evpn>
#                         <signaling>
#                             <accepted-prefix-limit>
#                                 <maximum>20</maximum>
#                                 <teardown>
#                                     <limit-threshold>98</limit-threshold>
#                                     <idle-timeout>
#                                         <timeout>2001</timeout>
#                                     </idle-timeout>
#                                 </teardown>
#                             </accepted-prefix-limit>
#                             <damping/>
#                             <defer-initial-multipath-build>
#                                 <maximum-delay>2</maximum-delay>
#                             </defer-initial-multipath-build>
#                         </signaling>
#                     </evpn>
#                 </family>
#             </bgp>
#             <ospf3>
#                 <area>
#                     <name>0.0.0.100</name>
#                     <stub>
#                         <default-metric>200</default-metric>
#                     </stub>
#                     <interface>
#                         <name>so-0/0/0.0</name>
#                         <metric>5</metric>
#                         <priority>3</priority>
#                     </interface>
#                 </area>
#             </ospf3>
#         </protocols>
#         <routing-options>
#             <static>
#                 <route>
#                     <name>172.16.17.0/24</name>
#                     <discard />
#                 </route>
#             </static>
#             <router-id>10.200.16.75</router-id>
#             <autonomous-system>
#                 <as-number>65432</as-number>
#             </autonomous-system>
#         </routing-options>
#     </configuration>
# </rpc-reply>


- name: Parsed the bgp address family running config to get the facts
  junipernetworks.junos.junos_bgp_address_family:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
# Task Output:
# ------------
#
# parsed:
#   address_family:
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2001
#         limit_threshold: 98
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       type: signaling
#     afi: evpn
#   - af_type:
#     - accepted_prefix_limit:
#         idle_timeout_value: 2000
#         limit_threshold: 99
#         maximum: 20
#       damping: true
#       defer_initial_multipath_build:
#         maximum_delay: 2
#       delay_route_advertisements:
#         max_delay_route_age: 20
#         max_delay_routing_uptime: 32000
#         min_delay_inbound_convergence: 32000
#         min_delay_routing_uptime: 23000
#       graceful_restart_forwarding_state_bit: from-fib
#       type: any
#     - legacy_redirect_ip_action:
#         receive: true
#         send: true
#       loops: 4
#       no_install: true
#       output_queue_priority_expedited: true
#       secondary_independent_resolution: true
#       type: flow
#     - entropy_label:
#         no_next_hop_validation: true
#       explicit_null:
#         connected_only: true
#       per_group_label: true
#       per_prefix_label: true
#       prefix_limit:
#         forever: true
#         limit_threshold: 99
#         maximum: 20
#       resolve_vpn: true
#       rib: inet.3
#       route_refresh_priority_priority: 3
#       type: labeled-unicast
#     - extended_nexthop: true
#       extended_nexthop_color: true
#       local_ipv4_address: 9.9.9.9
#       type: unicast
#     afi: inet

# Using rendered
#
- name: Render the commands for provided  configuration
  junipernetworks.junos.junos_bgp_address_family:
    config:
      address_family:
        - afi: 'evpn'
          af_type:
            - type: 'signaling'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 98
                idle_timeout_value: 2001
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
        - afi: 'inet'
          af_type:
            - type: 'flow'
              legacy_redirect_ip_action:
                send: true
                receive: true
              loops: 4
              no_install: true
              output_queue_priority_expedited: true
              secondary_independent_resolution: true

            - type: 'unicast'
              extended_nexthop: true
              extended_nexthop_color: true
              local_ipv4_address: '9.9.9.9'

            - type: 'labeled-unicast'
              entropy_label:
                no_next_hop_validation: true
              explicit_null:
                connected_only: true
              per_prefix_label: true
              per_group_label: true
              prefix_limit:
                maximum: 20
                limit_threshold: 99
                forever: true
              resolve_vpn: true
              rib: 'inet.3'
              route_refresh_priority_expedited: true
              route_refresh_priority_priority: 3

            - type: 'any'
              accepted_prefix_limit:
                maximum: 20
                limit_threshold: 99
                idle_timeout_value: 2000
              damping: true
              defer_initial_multipath_build:
                maximum_delay: 2
              delay_route_advertisements:
                max_delay_route_age: 20
                max_delay_routing_uptime: 32000
                min_delay_inbound_convergence: 32000
                min_delay_routing_uptime: 23000
              graceful_restart_forwarding_state_bit: 'from-fib'
    state: rendered

# Task Output:
# ------------
#
# rendered: "<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:bgp><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit><nc:maximum>20</nc:maximum>
# <nc:teardown><nc:limit-threshold>98</nc:limit-threshold><nc:idle-timeout><nc:timeout>2001</nc:timeout>
# </nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/><nc:defer-initial-multipath-build>
# <nc:maximum-delay>2</nc:maximum-delay></nc:defer-initial-multipath-build></nc:signaling>
# </nc:evpn><nc:inet><nc:flow><nc:legacy-redirect-ip-action><nc:send/><nc:receive/>
# </nc:legacy-redirect-ip-action><nc:loops>4</nc:loops><nc:no-install/>
# <nc:output-queue-priority><nc:expedited/></nc:output-queue-priority>
# <nc:secondary-independent-resolution/></nc:flow><nc:unicast><nc:extended-nexthop/>
# <nc:extended-nexthop-color/><nc:local-ipv4-address>9.9.9.9</nc:local-ipv4-address>
# </nc:unicast><nc:labeled-unicast><nc:entropy-label><nc:no-next-hop-validation/>
# </nc:entropy-label><nc:explicit-null><nc:connected-only/></nc:explicit-null>
# <nc:per-prefix-label/><nc:per-group-label/><nc:prefix-limit><nc:maximum>20</nc:maximum>
# <nc:teardown>99<nc:idle-timeout><nc:forever/></nc:idle-timeout></nc:teardown>
# </nc:prefix-limit><nc:resolve-vpn/><nc:rib><nc:inet.3/></nc:rib><nc:route-refresh-priority>
# <nc:expedited/><nc:priority>3</nc:priority></nc:route-refresh-priority></nc:labeled-unicast>
# <nc:any><nc:accepted-prefix-limit><nc:maximum>20</nc:maximum><nc:teardown>
# <nc:limit-threshold>99</nc:limit-threshold><nc:idle-timeout><nc:timeout>2000</nc:timeout>
# </nc:idle-timeout></nc:teardown></nc:accepted-prefix-limit><nc:damping/>
# <nc:defer-initial-multipath-build><nc:maximum-delay>2</nc:maximum-delay>
# </nc:defer-initial-multipath-build><nc:delay-route-advertisements>
# <nc:maximum-delay><nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime>
# </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence>
# <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements>
# <nc:graceful-restart><nc:forwarding-state-bit>from-fib</nc:forwarding-state-bit>
# </nc:graceful-restart></nc:any></nc:inet></nc:family></nc:bgp></nc:protocols>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <nc:bgp><nc:family><nc:evpn><nc:signaling><nc:accepted-prefix-limit> <nc:maximum>21</nc:maximum><nc:teardown><nc:limit-threshold>99</nc:limit-threshold> <nc:idle-timeout><nc:timeout>2002</nc:timeout></nc:idle-timeout> </nc:teardown></nc:accepted-prefix-limit><nc:damping/> <nc:delay-route-advertisements><nc:maximum-delay> <nc:route-age>20</nc:route-age><nc:routing-uptime>32000</nc:routing-uptime> </nc:maximum-delay><nc:minimum-delay><nc:inbound-convergence>32000</nc:inbound-convergence> <nc:routing-uptime>23000</nc:routing-uptime></nc:minimum-delay></nc:delay-route-advertisements> </nc:signaling></nc:evpn></nc:family></nc:bgp></nc:protocols>", "xml 2", "xml 3"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["<nc:protocols xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">"]

Authors

  • Rohit Thakur (@rohitthakur2590)