junipernetworks.junos.junos_command module – Run arbitrary commands on an Juniper JUNOS device

Note

This module is part of the junipernetworks.junos collection (version 8.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_command.

New in junipernetworks.junos 1.0.0

Synopsis

• Sends an arbitrary set of commands to an JUNOS node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.

Aliases: command

Requirements

The below requirements are needed on the host that executes this module.

• jxmlease

• ncclient (>=v0.5.2)

Parameters

Parameter	Comments
commands list / elements=string	The commands to send to the remote junos device. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded.
display aliases: format, output string	Encoding scheme to use when serializing output from the device. This handles how to properly understand the output and apply the conditionals path to the result set. For rpcs argument default display is xml and for commands argument default display is text. Value set is applicable only for fetching configuration from device. Choices: "text" "json" "xml" "set"
interval integer	Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again. Default: 1
match string	The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied. Choices: "any" "all" ← (default)
retries integer	Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals. Default: 10
rpcs list / elements=string	The rpcs argument accepts a list of RPCs to be executed over a netconf session and the results from the RPC execution is return to the playbook via the modules results dictionary.
wait_for aliases: waitfor list / elements=string	Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.

• Recommended connection is netconf. See the Junos OS Platform Options.

• This module also works with network_cli connections and with local connections for legacy playbooks.

• For information on using CLI and netconf see the :ref:`Junos OS Platform Options guide <junos_platform_options>`

• For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`

• For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: run show version on remote devices
  junipernetworks.junos.junos_command:
    commands: show version

- name: run show version and check to see if output contains Juniper
  junipernetworks.junos.junos_command:
    commands: show version
    wait_for: result[0] contains Juniper

- name: run multiple commands on remote nodes
  junipernetworks.junos.junos_command:
    commands:
      - show version
      - show interfaces

- name: run multiple commands and evaluate the output
  junipernetworks.junos.junos_command:
    commands:
      - show version
      - show interfaces
    wait_for:
      - result[0] contains Juniper
      - result[1] contains Loopback0

- name: run commands and specify the output format
  junipernetworks.junos.junos_command:
    commands: show version
    display: json

- name: run rpc on the remote device
  junipernetworks.junos.junos_command:
    commands: show configuration
    display: set

- name: run rpc on the remote device
  junipernetworks.junos.junos_command:
    rpcs: get-software-information

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
failed_conditions list / elements=string	The list of conditionals that have failed Returned: failed Sample: ["...", "..."]
output list / elements=string	The set of transformed xml to json format from the commands responses Returned: If the display is in xml format. Sample: ["...", "..."]
stdout list / elements=string	The set of responses from the commands Returned: always apart from low level errors (such as action plugin) Sample: ["...", "..."]
stdout_lines list / elements=string	The value of stdout split into a list Returned: always apart from low level errors (such as action plugin) Sample: [["...", "..."], ["..."], ["..."]]

Authors

• Peter Sprygada (@privateip)

Collection links

• Issue Tracker
• Repository (Sources)