kaytus.ksmanage.add_ldisk module – Create logical disk
Note
This module is part of the kaytus.ksmanage collection (version 1.2.2).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install kaytus.ksmanage
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: kaytus.ksmanage.add_ldisk
.
New in kaytus.ksmanage 1.0.0
Synopsis
Create logical disk on kaytus Server.
Requirements
The below requirements are needed on the host that executes this module.
Python 3.7+
inManage
Parameters
Parameter |
Comments |
---|---|
Driver accelerator, 1 - 1h, 2 - 2h, 3 - 3h. Required when controller type is PMC. Choices:
|
|
Access Policy, 1 - Read Write, 2 - Read Only, 3 - Blocked. Required when controller type is LSI. Choices:
|
|
Drive Cache, 1 - Unchanged, 2 - Enabled, 3 - Disabled. Required when controller type is LSI. Choices:
|
|
Raid controller ID. Required when controller type is LSI, PMC or MV. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Init State, 1 - No Init, 2 - Quick Init, 3 - Full Init. Required when controller type is LSI. Choices:
|
|
IO Policy, 1 - Direct IO, 2 - Cached IO. Required when controller type is LSI. Choices:
|
|
RAID Level, 0 - RAID0, 1 - RAID1, 5 - RAID5, 6 - RAID6, 10 - RAID10. Required when and controller type is LSI or PMC. Choices:
|
|
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
A dict object containing connection details. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
Read Policy, 1 - Read Ahead, 2 - No Read Ahead. Required when controller type is LSI. Choices:
|
|
Select Size, from 1 to 100. Required when controller type is LSI. |
|
Strip Size, 0 - 32k, 1 - 64k, 2 - 128k, 3 - 256k, 4 - 512k, 5 - 1024k. Required when Info=None and controller type is LSI, PMC or MV. When the controller type is MV, size is [0, 1]. When the controller type is LSI or PMC, size is [1, 2, 3, 4, 5]. Choices:
|
|
Slot Num, input multiple slotNumber like 0, 1, 2…. Required when controller type is LSI or PMC. |
|
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable |
|
Virtual drive name. Required when controller type is PMC or server model is M7. Required when controller type is MV. |
|
Write Policy, 1 - Write Through, 2 - Write Back, 3 - Write caching ok if bad BBU. Required when controller type is LSI. Choices:
|
Notes
Note
Does not support
check_mode
.
Examples
- name: Add ldisk test
hosts: ksmanage
connection: local
gather_facts: false
vars:
ksmanage:
host: "{{ ansible_ssh_host }}"
username: "{{ username }}"
password: "{{ password }}"
tasks:
- name: "Add LSI ldisk"
kaytus.ksmanage.add_ldisk:
ctrl_id: 0
level: 1
size: 1
access: 1
r: 1
w: 1
io: 1
cache: 1
init: 2
select: 10
slot: 0, 1
provider: "{{ ksmanage }}"
- name: "Add PMC ldisk"
kaytus.ksmanage.add_ldisk:
ctrl_id: 0
level: 1
size: 1
accelerator: 1
slot: 0, 1
vname: "test"
provider: "{{ ksmanage }}"
- name: "Add MV ldisk"
kaytus.ksmanage.add_ldisk:
ctrl_id: 0
size: 1
vname: "test"
provider: "{{ ksmanage }}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Check to see if a change was made on the device. Returned: always |
|
Messages returned after module execution. Returned: always |
|
Status after module execution. Returned: always |