dellemc.enterprise_sonic.sonic_logging module – Manage logging configuration on SONiC.
Note
This module is part of the dellemc.enterprise_sonic collection (version 2.5.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.
To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_logging.
New in dellemc.enterprise_sonic 2.1.0
Synopsis
- This module provides configuration management of logging for devices running SONiC. 
Parameters
| Parameter | Comments | 
|---|---|
| Specifies logging related configurations. | |
| Remote logging sever configuration. | |
| IPv4/IPv6 address or host name of the remote logging server. | |
| Type of messages that remote server receives. message_type can not be deleted. Choices: 
 | |
| Type of the protocol for sending the messages. Choices: 
 | |
| Destination port number for logging messages sent to the server. remote_port can not be deleted. | |
| Source interface used as source ip for sending logging packets. source_interface can not be deleted. | |
| VRF name used by remote logging server. | |
| The state of the configuration after module completion. Choices: 
 | 
Notes
Note
- Supports - check_mode.
Examples
# Using deleted
#
# Before state:
# -------------
#
#sonic# show logging servers
#---------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE     PROTOCOL
#---------------------------------------------------------------------------------------
#10.11.0.2       5         Ethernet24          -              event              udp
#10.11.1.1       616       Ethernet8           -              log                tcp
#log1.dell.com   6         Ethernet28          -              log                udp
#
- name: Delete logging server configuration
  sonic_logging:
    config:
      remote_servers:
        - host: 10.11.0.2
        - host: log1.dell.com
    state: deleted
# After state:
# ------------
#
#sonic# show logging servers
#---------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE     PROTOCOL
#---------------------------------------------------------------------------------------
#10.11.1.1       616       Ethernet8           -              log               tcp
#
#
# Using merged
#
# Before state:
# -------------
#
#sonic# show logging servers
#--------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE    PROTOCOL
#--------------------------------------------------------------------------------------
#10.11.1.1       616       Ethernet8           -              log              tcp
#
- name: Merge logging server configuration
  sonic_logging:
    config:
      remote_servers:
        - host: 10.11.0.2
          remote_port: 5
          protocol: TCP
          source_interface: Ethernet24
          message_type: event
        - host: log1.dell.com
          remote_port: 6
          protocol: udp
          source_interface: Ethernet28
    state: merged
# After state:
# ------------
#
#sonic# show logging servers
#-------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE   PROTOCOL
#-------------------------------------------------------------------------------------
#10.11.0.2       5         Ethernet24          -              event           udp
#10.11.1.1       616       Ethernet8           -              log             tcp
#log1.dell.com   6         Ethernet28          -              log             udp
#
#
# Using overridden
#
# Before state:
# -------------
#
#sonic# show logging servers
#--------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE    PROTOCOL
#--------------------------------------------------------------------------------------
#10.11.1.1       616       Ethernet8           -              log              tcp
#10.11.1.2       626       Ethernet16          -              event            udp
#
- name: Replace logging server configuration
  sonic_logging:
    config:
      remote_servers:
        - host: 10.11.1.2
          remote_port: 622
          protocol: TCP
          source_interface: Ethernet24
          message_type: event
    state: overridden
#
# After state:
# ------------
#
#sonic# show logging servers
#--------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE    PROTOCOL
#--------------------------------------------------------------------------------------
#10.11.1.2       622       Ethernet24          -              event            tcp
#
# Using replaced
#
# Before state:
# -------------
#
#sonic# show logging servers
#--------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE    PROTOCOL
#--------------------------------------------------------------------------------------
#10.11.1.1       616       Ethernet8           -              log              tcp
#10.11.1.2       626       Ethernet16          -              event            udp
#
- name: Replace logging server configuration
  sonic_logging:
    config:
      remote_servers:
        - host: 10.11.1.2
          remote_port: 622
          protocol: UDP
    state: replaced
#
# After state:
# ------------
#
# "MESSAGE-TYPE" has default value of "log"
#
#sonic# show logging servers
#--------------------------------------------------------------------------------------
#HOST            PORT      SOURCE-INTERFACE    VRF            MESSAGE-TYPE    PROTOCOL
#--------------------------------------------------------------------------------------
#10.11.1.1       616       Ethernet8           -              log              tcp
#10.11.1.2       622       -                   -              log              udp
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Description | 
|---|---|
| The resulting configuration module invocation. Returned: when changed Sample:  | |
| The generated configuration module invocation. Returned: when  Sample:  | |
| The configuration prior to the module invocation. Returned: always Sample:  | |
| The set of commands pushed to the remote device. Returned: always Sample:  | 
