netapp.storagegrid.na_sg_grid_gateway module – Manage Load balancer (gateway) endpoints on StorageGRID.
Note
This module is part of the netapp.storagegrid collection (version 21.14.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install netapp.storagegrid.
To use it in a playbook, specify: netapp.storagegrid.na_sg_grid_gateway.
New in netapp.storagegrid 21.7.0
Synopsis
Create or Update Load Balancer Endpoints on StorageGRID.
This module is idempotent if private_key is not specified.
The module will match an existing config based on port and display_name.
If multiple load balancer endpoints exist utilizing the same port and display name, use gateway_id to select the intended endpoint.
Parameters
Parameter |
Comments |
|---|---|
The url to the StorageGRID Admin Node REST API. |
|
The authorization token for the API request |
|
Binding mode to restrict accessibility of the load balancer endpoint. A binding mode other than global requires StorageGRID 11.5 or greater. Choices:
|
|
Intermediate CA certificate bundle in concatenated PEM-encoding. Omit when there is no intermediate CA. |
|
The type of service to proxy through the load balancer. Choices:
|
|
A display name for the configuration. This parameter can be modified if gateway_id is also specified. |
|
Whether to use the port bind for grid manager traffic. Choices:
|
|
Indicates whether to listen for connections on IPv4. Choices:
|
|
Indicates whether to listen for connections on IPv6. Choices:
|
|
Whether to use the port bind for tenant manager traffic. Choices:
|
|
ID of the load balancer endpoint. |
|
A set of StorageGRID HA Groups by name or UUID to bind the load balancer endpoint to. Option is ignored unless binding_mode=ha-groups. |
|
A set of StorageGRID node interfaces to bind the load balancer endpoint to. |
|
The interface to bind to. eth0 corresponds to the Grid Network, eth1 to the Admin Network, and eth2 to the Client Network. |
|
Name of the StorageGRID node. |
|
A list of node types to bind to. This Load Balancer Endpoint will listen on all nodes of this type. The adminNode type includes both primary and non-primary admin nodes. Choices:
|
|
The TCP port to serve traffic on. This parameter cannot be modified after the load balancer endpoint has been created. |
|
Certficate private key in PEM-encoding. Required if server_certificate is not empty. |
|
Whether the load balancer endpoint serves HTTP or HTTPS traffic. This parameter cannot be modified after the load balancer endpoint has been created. Choices:
|
|
X.509 server certificate in PEM-encoding. Omit if using default certificates. |
|
Whether the specified load balancer endpoint should be configured. Choices:
|
|
Should https certificates be validated? Choices:
|
Notes
Note
The modules prefixed with
na_sgare built to manage NetApp StorageGRID.
Examples
- name: Create and Upload Certificate to a Gateway Endpoint with global binding
netapp.storagegrid.na_sg_grid_gateway:
api_url: "https://<storagegrid-endpoint-url>"
auth_token: "storagegrid-auth-token"
displayName: "FabricPool Endpoint"
port: 10443
secure: True
enable_ipv4: True
enable_ipv6: True
default_service_type: "s3"
server_certificate: |
-----BEGIN CERTIFICATE-----
MIIC6DCCAdACCQC7l4WukhKD0zANBgkqhkiG9w0BAQsFADA2..swCQYDVQQGEwJB
BAMMHnNnYW4wMS5kZXYubWljcm9icmV3Lm5ldGFwcC5hdTCC..IwDQYJKoZIhvcN
AQEBBQADggEPADCCAQoCggEBAMvjm9I35lmKcC7ITVL8+QiZ..lvdkbfZCUQrfdy
71inP+XmPjs0rnkhICA9ItODteRcVlO+t7nDTfm7HgG0mJFk..m0ffyEYrcx24qu
S7gXYQjRsJmrep1awoaCa20BMGuqK2WKI3IvZ7YiT22qkBqK..+hIFffX6u3Jy+B
77pR6YcATtpMHW/AaOx+OX9l80dIRsRZKMDxYQ==
-----END CERTIFICATE-----
private_key: |
-----BEGIN PRIVATE KEY-----
MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIB..DL45vSN+ZZinAu
L25W0+cz1Oi69AKkI7d9nbFics2ay5+7o+4rKqf3en2R4MSx..vy+iDlOmATib5O
x8TN5pJ9AgMBAAECggEADDLM8tHXXUoUFihzv+BUwff8p8Yc..cXFcSes+xTd5li
po8lNsx/v2pQx4ByBkuaYLZGIEXOWS6gkp44xhIXgQKBgQD4..7862u5HLbmhrV3
vs8nC69b3QKBgQDacCD8d8JpwPbg8t2VjXM3UvdmgAaLUfU7..DWV+W3jqzmDOoN
zWVgPbPNj0UmzvLDbgxLoxe77wjn2BHsAJVAfJ9VeQKBgGqF..gYO+wHR8lJUoa5
ZEe8Upy2oBtvND/0dnwO2ym2FGsBJN0Gr4NKdG5vkzLsthKk..Rm0ikwEUOUZQKE
K8J5yEVeo9K2v3wggtq8fYn6
-----END PRIVATE KEY-----
validate_certs: false
- name: Create a HTTP Gateway Endpoint with HA Group Binding
netapp.storagegrid.na_sg_grid_gateway:
api_url: "https://<storagegrid-endpoint-url>"
auth_token: "storagegrid-auth-token"
displayName: "App Endpoint 1"
port: 10501
secure: false
enable_ipv4: True
enable_ipv6: True
default_service_type: "s3"
binding_mode: ha-groups
ha_groups: site1_ha_group
validate_certs: false
- name: Create a HTTP Gateway Endpoint with Node Interface Binding
netapp.storagegrid.na_sg_grid_gateway:
api_url: "https://<storagegrid-endpoint-url>"
auth_token: "storagegrid-auth-token"
displayName: "App Endpoint 2"
port: 10502
secure: false
enable_ipv4: True
enable_ipv6: True
default_service_type: "s3"
binding_mode: node-interfaces
node_interfaecs:
- node: SITE1_ADM1
interface: eth2
- node: SITE2_ADM1
interface: eth2
validate_certs: false
- name: Delete Gateway Endpoint
netapp.storagegrid.na_sg_grid_gateway:
api_url: "https://<storagegrid-endpoint-url>"
auth_token: "storagegrid-auth-token"
displayName: "App Endpoint 2"
port: 10502
default_service_type: "s3"
validate_certs: false
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
Returns information about the StorageGRID Load Balancer Endpoint. Returned: success Sample: |