ansible.builtin.blockinfile – Insert/update/remove a text block surrounded by marker lines

Note

This module is part of ansible-base and included in all Ansible installations. In most cases, you can use the short module name blockinfile even without specifying the collections: keyword. Despite that, we recommend you use the FQCN for easy linking to the module documentation and to avoid conflicting with other collections that may have the same module name.

New in version 2.0: of ansible.builtin

Synopsis

  • This module will insert/update/remove a block of multi-line text surrounded by customizable marker lines.

Parameters

Parameter Choices/Defaults Comments
attributes
string
added in 2.3 of ansible.builtin
The attributes the resulting file or directory should have.
To get supported flags look at the man page for chattr on the target system.
This string should contain the attributes in the same order as the one displayed by lsattr.
The = operator is assumed as default, otherwise + or - operators need to be included in the string.

aliases: attr
backup
boolean
    Choices:
  • no ←
  • yes
Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly.
block
string
Default:
""
The text to insert inside the marker lines.
If it is missing or an empty string, the block will be removed as if state were specified to absent.

aliases: content
create
boolean
    Choices:
  • no ←
  • yes
Create a new file if it does not exist.
group
string
Name of the group that should own the file/directory, as would be fed to chown.
insertafter
string
    Choices:
  • EOF ←
  • *regex*
If specified and no begin/ending marker lines are found, the block will be inserted after the last match of specified regular expression.
A special value is available; EOF for inserting the block at the end of the file.
If specified regular expression has no matches, EOF will be used instead.
insertbefore
string
    Choices:
  • BOF
  • *regex*
If specified and no begin/ending marker lines are found, the block will be inserted before the last match of specified regular expression.
A special value is available; BOF for inserting the block at the beginning of the file.
If specified regular expression has no matches, the block will be inserted at the end of the file.
marker
string
Default:
"# {mark} ANSIBLE MANAGED BLOCK"
The marker line template.
{mark} will be replaced with the values in marker_begin (default="BEGIN") and marker_end (default="END").
Using a custom marker without the {mark} variable may result in the block being repeatedly inserted on subsequent playbook runs.
marker_begin
string
added in 2.5 of ansible.builtin
Default:
"BEGIN"
This will be inserted at {mark} in the opening ansible block marker.
marker_end
string
added in 2.5 of ansible.builtin
Default:
"END"
This will be inserted at {mark} in the closing ansible block marker.
mode
raw
The permissions the resulting file or directory should have.
For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must either add a leading zero so that Ansible's YAML parser knows it is an octal number (like 0644 or 01777) or quote it (like '644' or '1777') so Ansible receives a string and can do its own conversion from string into number.
Giving Ansible a number without following one of these rules will end up with a decimal number which will have unexpected results.
As of Ansible 1.8, the mode may be specified as a symbolic mode (for example, u+rwx or u=rw,g=r,o=r).
owner
string
Name of the user that should own the file/directory, as would be fed to chown.
path
path / required
The file to modify.
Before Ansible 2.3 this option was only usable as dest, destfile and name.

aliases: dest, destfile, name
selevel
string
The level part of the SELinux file context.
This is the MLS/MCS attribute, sometimes known as the range.
When set to _default, it will use the level portion of the policy if available.
serole
string
The role part of the SELinux file context.
When set to _default, it will use the role portion of the policy if available.
setype
string
The type part of the SELinux file context.
When set to _default, it will use the type portion of the policy if available.
seuser
string
The user part of the SELinux file context.
By default it uses the system policy, where applicable.
When set to _default, it will use the user portion of the policy if available.
state
string
    Choices:
  • absent
  • present ←
Whether the block should be there or not.
unsafe_writes
boolean
added in 2.2 of ansible.builtin
    Choices:
  • no ←
  • yes
Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target file.
By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted files, which cannot be updated atomically from inside the container and can only be written in an unsafe manner.
This option allows Ansible to fall back to unsafe methods of updating files when atomic operations fail (however, it doesn't force Ansible to perform unsafe writes).
IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption.
validate
string
The validation command to run before copying into place.
The path to the file to validate is passed in via '%s' which must be present as in the examples below.
The command is passed securely so shell features like expansion and pipes will not work.

Notes

Note

  • This module supports check mode.

  • When using ‘with_*’ loops be aware that if you do not set a unique mark the block will be overwritten on each iteration.

  • As of Ansible 2.3, the dest option has been changed to path as default, but dest still works as well.

  • Option follow has been removed in Ansible 2.5, because this module modifies the contents of the file so follow=no doesn’t make sense.

  • When more then one block should be handled in one file you must change the marker per task.

Examples

# Before Ansible 2.3, option 'dest' or 'name' was used instead of 'path'
- name: Insert/Update "Match User" configuration block in /etc/ssh/sshd_config
  blockinfile:
    path: /etc/ssh/sshd_config
    block: |
      Match User ansible-agent
      PasswordAuthentication no

- name: Insert/Update eth0 configuration stanza in /etc/network/interfaces
        (it might be better to copy files into /etc/network/interfaces.d/)
  blockinfile:
    path: /etc/network/interfaces
    block: |
      iface eth0 inet static
          address 192.0.2.23
          netmask 255.255.255.0

- name: Insert/Update configuration using a local file and validate it
  blockinfile:
    block: "{{ lookup('file', './local/sshd_config') }}"
    path: /etc/ssh/sshd_config
    backup: yes
    validate: /usr/sbin/sshd -T -f %s

- name: Insert/Update HTML surrounded by custom markers after <body> line
  blockinfile:
    path: /var/www/html/index.html
    marker: "<!-- {mark} ANSIBLE MANAGED BLOCK -->"
    insertafter: "<body>"
    block: |
      <h1>Welcome to {{ ansible_hostname }}</h1>
      <p>Last updated on {{ ansible_date_time.iso8601 }}</p>

- name: Remove HTML as well as surrounding markers
  blockinfile:
    path: /var/www/html/index.html
    marker: "<!-- {mark} ANSIBLE MANAGED BLOCK -->"
    block: ""

- name: Add mappings to /etc/hosts
  blockinfile:
    path: /etc/hosts
    block: |
      {{ item.ip }} {{ item.name }}
    marker: "# {mark} ANSIBLE MANAGED BLOCK {{ item.name }}"
  loop:
    - { name: host1, ip: 10.10.1.10 }
    - { name: host2, ip: 10.10.1.11 }
    - { name: host3, ip: 10.10.1.12 }

Authors

  • Yaegashi Takeshi (@yaegashi)