arista.eos.eos_bgp_address_family – Manages BGP address family resource module

Note

This plugin is part of the arista.eos collection (version 1.3.0).

To install it use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_bgp_address_family.

New in version 1.4.0: of arista.eos

Synopsis

• This module configures and manages the attributes of BGP AF on Arista EOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter					Choices/Defaults	Comments
config dictionary						Configurations for BGP address family.
	address_family list / elements=dictionary					Enable address family and enter its config mode
		afi string			Choices: ipv4 ipv6 evpn	address family.
		bgp_params dictionary				BGP parameters.
			additional_paths string		Choices: install send receive	BGP additional-paths commands
			next_hop_address_family string		Choices: ipv6	Next-hop address-family configuration
			next_hop_unchanged boolean		Choices: no yes	Preserve original nexthop while advertising routes to eBGP peers.
			redistribute_internal boolean		Choices: no yes	Redistribute internal BGP routes.
			route string			Configure route-map for route installation.
		graceful_restart boolean			Choices: no yes	Enable graceful restart mode.
		neighbor list / elements=dictionary				Configure routing for a network.
			activate boolean		Choices: no yes	Activate neighbor in the address family.
			additional_paths string		Choices: send receive	BGP additional-paths commands.
			default_originate dictionary			Originate default route to this neighbor.
				always boolean	Choices: no yes	Always originate default route to this neighbor.
				route_map string		Route map reference.
			encapsulation dictionary			Default transport encapsulation for neighbor. Applicable for evpn address-family.
				source_interface string		Source interface to update BGP next hop address. Applicable for mpls transport.
				transport string	Choices: mpls vxlan	MPLS/VXLAN transport.
			graceful_restart boolean		Choices: no yes	Enable graceful restart mode.
			next_hop_address_family string		Choices: ipv6	Next-hop address-family configuration
			next_hop_unchanged boolean		Choices: no yes	Preserve original nexthop while advertising routes to eBGP peers.
			peer string			Neighbor address/ peer-group name.
			prefix_list dictionary			Prefix list reference.
				direction string	Choices: in out	Configure an inbound/outbound prefix-list.
				name string		prefix list name.
			route_map dictionary			Route map reference.
				direction string	Choices: in out	Configure an inbound/outbound route-map.
				name string		Route map name.
			weight integer			Weight to assign.
		network list / elements=dictionary				configure routing for network.
			address string			network address.
			route_map string			Route map reference.
		redistribute list / elements=dictionary				Redistribute routes in to BGP.
			isis_level string		Choices: level-1 level-2 level-1-2	Applicable for isis routes. Specify isis route level.
			ospf_route string		Choices: internal external nssa_external_1 nssa_external_2	ospf route options.
			protocol string		Choices: isis ospf3 dhcp	Routes to be redistributed.
			route_map string			Route map reference.
		route_target dictionary				Route target
			mode string		Choices: both import export	route import or route export.
			target string			route target
		safi string			Choices: labeled-unicast multicast	Address family type for ipv4.
		vrf string				name of the VRF in which BGP will be configured.
	as_number string					Autonomous system number.
running_config string						This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string					Choices: deleted merged ← overridden replaced gathered rendered parsed	The state the configuration should be left in.

Notes

Note

• Tested against Arista EOS 4.23.0F

• This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state

# veos(config)#show running-config | section bgp
# veos(config)#

  - name: Merge provided configuration with device configuration
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"
      state: merged

# After state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#

# Module Execution:

# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ],

# Using replaced:

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#
#

  - name: Replace
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
      state: replaced

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
#     "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute ospf3 match external",
#         "no redistribute isis level-2",
#         "no route-target export 33:11",
#         "exit",
#         "exit",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "no neighbor peer2 activate",
#         "no bgp additional-paths receive",
#         "exit"
#     ],

# Using overridden (overriding af at global context):
# Before state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#

  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
      state: overridden

# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "no redistribute ospf3 match external",
#         "no network 1.1.1.0/24",
#         "no network 1.5.1.0/24 route-map MAP01",
#         "neighbor peer2 default-originate always",
#         "no neighbor 1.1.1.1 activate",
#         "bgp additional-paths receive",
#         "exit",
#         "no address-family ipv6"
#     ],

# using Overridden (overridding af in vrf context):

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
#          redistribute ospf3 match external
# veos(config-router-bgp)#


  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
            vrf: vrft
      state: overridden

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     },
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv4",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "exit",
#         " vrf vrft",
#         "no address-family ipv6"
#     ],

# Using Deleted:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: Delete
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
          - afi: "ipv6"
      state: deleted

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# Using parsed:

# parsed_bgp_address_family.cfg :

# router bgp 10
#    neighbor n2 peer-group
#    neighbor n2 next-hop-unchanged
#    neighbor n2 maximum-routes 12000
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    network 1.1.1.0/24
#    network 1.5.1.0/24 route-map MAP01
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       no bgp additional-paths receive
#       neighbor n2 next-hop-unchanged
#       redistribute isis level-2
#    !
#    vrf bgp_10
#       ip access-group acl01
#       ucmp fec threshold trigger 33 clear 22 warning-only
#       !
#       address-family ipv4
#          route-target import 20:11
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
#       !
#       address-family ipv6
#          redistribute ospf3 match external

  - name: parse configs
    arista.eos.eos_bgp_address_family:
      running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
      state: parsed

# Module Execution:
# "parsed": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "next_hop_unchanged": true,
#                         "peer": "n2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "route_target": {
#                     "mode": "import",
#                     "target": "20:11"
#                 },
#                 "vrf": "bgp_10"
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     }
# }

# Using gathered:

# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: gather configs
    arista.eos.eos_bgp_address_family:
      state: gathered

# Module Execution:
# "gathered": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# using rendered:

  - name:  Render
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"

      state: rendered

# Module Execution:

# "rendered": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ]
#

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)