cisco.asa.asa_config – Manage configuration sections on Cisco ASA devices¶

Note

This plugin is part of the cisco.asa collection (version 1.0.4).

To install it use: ansible-galaxy collection install cisco.asa.

To use it in a playbook, specify: cisco.asa.asa_config.

New in version 1.0.0: of cisco.asa

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis ¶

Cisco ASA configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with ASA configuration sections in a deterministic way.

Note

This module has a corresponding action plugin.

Parameters ¶

Parameter		Choices/Defaults	Comments
after list / elements=string			The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set.
authorize boolean		Choices: no ← yes	Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` and `become: yes`. For more information please see the Network Guide. Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
backup boolean		Choices: no ← yes	This argument will cause the module to create a full backup of the current `running-config` from the remote device before any changes are made. If the `backup_options` value is not given, the backup file is written to the `backup` folder in the playbook root directory. If the directory does not exist, it is created.
backup_options dictionary			This is a dict object containing configurable options related to backup file path. The value of this option is read only when `backup` is set to yes, if `backup` is set to no this option will be silently ignored.
	dir_path path		This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of `filename` or default filename as described in `filename` options description. If the path value is not given in that case a backup directory will be created in the current working directory and backup configuration will be copied in `filename` within backup directory.
	filename string		The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time>
before list / elements=string			The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system.
config string			The `config` argument allows the playbook designer to supply the base configuration to be used to validate configuration changes necessary. If this argument is provided, the module will not download the running-config from the remote node.
context string			Specifies which context to target if you are running in the ASA in multiple context mode. Defaults to the current context you login to.
defaults boolean		Choices: no ← yes	This argument specifies whether or not to collect all defaults when getting the remote device running config. When enabled, the module will get the current config by issuing the command `show running-config all`.
lines list / elements=string			The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. aliases: commands
match string		Choices: line ← strict exact none	Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device.
parents list / elements=string			The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands.
passwords boolean		Choices: no ← yes	This argument specifies to include passwords in the config when retrieving the running-config from the remote device. This includes passwords related to VPN endpoints. This argument is mutually exclusive with defaults.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the Network Guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies idle timeout in seconds for the connection, in seconds. Useful if the console freezes before continuing. For example when saving configurations.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
replace string		Choices: line ← block	Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct
save boolean		Choices: no ← yes	The `save` argument instructs the module to save the running- config to the startup-config at the conclusion of the module running. If check mode is specified, this argument is ignored.
src path			Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents.

Notes ¶

Note

For more information on using Ansible to manage network devices see the Ansible Network Guide

Examples ¶

- cisco.asa.asa_config:
    lines:
    - network-object host 10.80.30.18
    - network-object host 10.80.30.19
    - network-object host 10.80.30.20
    parents: [object-group network OG-MONITORED-SERVERS]
    provider: '{{ cli }}'

- cisco.asa.asa_config:
    host: '{{ inventory_hostname }}'
    lines:
    - message-length maximum client auto
    - message-length maximum 512
    match: line
    parents: [policy-map type inspect dns PM-DNS, parameters]
    authorize: yes
    auth_pass: cisco
    username: admin
    password: cisco
    context: ansible

- cisco.asa.asa_config:
    lines:
    - ikev1 pre-shared-key MyS3cretVPNK3y
    parents: tunnel-group 1.1.1.1 ipsec-attributes
    passwords: yes
    provider: '{{ cli }}'

- name: attach ASA acl on interface vlan13/nameif cloud13
  cisco.asa.asa_config:
    lines:
    - access-group cloud-acl_access_in in interface cloud13
    provider: '{{ cli }}'

- name: configure ASA (>=9.2) default BGP
  cisco.asa.asa_config:
    lines:
    - bgp log-neighbor-changes
    - bgp bestpath compare-routerid
    provider: '{{ cli }}'
    parents:
    - router bgp 65002
  register: bgp
  when: bgp_default_config is defined
- name: configure ASA (>=9.2) BGP neighbor in default/single context mode
  cisco.asa.asa_config:
    lines:
    - bgp router-id {{ bgp_router_id }}
    - neighbor {{ bgp_neighbor_ip }} remote-as {{ bgp_neighbor_as }}
    - neighbor {{ bgp_neighbor_ip }} description {{ bgp_neighbor_name }}
    provider: '{{ cli }}'
    parents:
    - router bgp 65002
    - address-family ipv4 unicast
  register: bgp
  when: bgp_neighbor_as is defined
- name: configure ASA interface with standby
  cisco.asa.asa_config:
    lines:
    - description my cloud interface
    - nameif cloud13
    - security-level 50
    - ip address 192.168.13.1 255.255.255.0 standby 192.168.13.2
    provider: '{{ cli }}'
    parents: [interface Vlan13]
  register: interface
- name: Show changes to interface from task above
  debug:
    var: interface

- name: configurable backup path
  cisco.asa.asa_config:
    lines:
    - access-group cloud-acl_access_in in interface cloud13
    provider: '{{ cli }}'
    backup: yes
    backup_options:
      filename: backup.cfg
      dir_path: /home/user

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
backup_path string	when backup is yes	The full path to the backup file Sample: /playbooks/ansible/backup/asa_config.2016-07-16@22:28:34
updates list / elements=string	always	The set of commands that will be pushed to the remote device Sample: ['...', '...']

Authors¶

Peter Sprygada (@privateip), Patrick Ogenstad (@ogenstad)

cisco.asa.asa_config – Manage configuration sections on Cisco ASA devices¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Authors¶

Synopsis ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶