cisco.ios.ios_ospfv2 – OSPFv2 resource module

Note

This plugin is part of the cisco.ios collection (version 1.3.0).

To install it use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospfv2.

New in version 1.0.0: of cisco.ios

Synopsis

• This module configures and manages the Open Shortest Path First (OSPF) version 2 on IOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter						Choices/Defaults	Comments
config dictionary							A dictionary of OSPF options.
	processes list / elements=dictionary						List of OSPF instance configurations.
		address_family dictionary					Router Address Family configuration mode
			default boolean			Choices: no yes	Set a command to its defaults
			snmp_context string				Modify snmp parameters Configure SNMP context name
			topology dictionary				Associate the routing protocol to a topology instance
				base boolean		Choices: no yes	Entering router topology sub mode
				name string			Routing topology instance name
				tid boolean		Choices: no yes	Configuring the routing protocol topology tid Note, please refer vendor documentation for valid values
		adjacency dictionary					To configure control adjacency formation
			max_adjacency integer				Maximum number of adjacencies allowed to be forming Please refer vendor documentation for valid values
			min_adjacency integer				Initial number of adjacencies allowed to be forming in an area Please refer vendor documentation for valid values
			none boolean			Choices: no yes	No initial
		areas list / elements=dictionary					OSPF area parameters
			area_id string				OSPF area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF area ID in IP address format(e.g. A.B.C.D)
			authentication dictionary				Area authentication
				enable boolean		Choices: no yes	Enable area authentication
				message_digest boolean		Choices: no yes	Use IPsec authentication
			capability boolean			Choices: no yes	Enable area specific capability Enable exclusion of links from base topology
			default_cost integer				Set the summary default-cost of a NSSA/stub area Stub's advertised external route metric Note, please refer vendor documentation for respective valid values
			filter_list list / elements=dictionary				Filter networks between OSPF areas
				direction string / required		Choices: in out	The direction to apply on the filter networks sent to and from this area.
				name string			Name of an IP prefix-list
			nssa dictionary				Specify a NSSA area
				default_information_originate dictionary			Originate Type 7 default into NSSA area
					metric integer		OSPF default metric
					metric_type integer	Choices: 1 2	OSPF metric type for default routes OSPF Link State type
					nssa_only boolean	Choices: no yes	Limit default advertisement to this NSSA area
				no_ext_capability boolean		Choices: no yes	Do not send domain specific capabilities into NSSA
				no_redistribution boolean		Choices: no yes	No redistribution into this NSSA area
				no_summary boolean		Choices: no yes	Do not send summary LSA into NSSA
				set boolean		Choices: no yes	Enable a NSSA area
				translate string		Choices: always suppress-fa	Translate LSA Always translate LSAs on this ABR Suppress forwarding address in translated LSAs
			ranges list / elements=dictionary				Summarize routes matching address/mask (border routers only)
				address string			IP address to match
				advertise boolean		Choices: no yes	Advertise this range (default) Since, advertise when enabled is not shown in running-config idempotency won't be maintained for the play in the second or next run of the play.
				cost integer			User specified metric for this range
				netmask string			IP mask for address
				not_advertise boolean		Choices: no yes	DoNotAdvertise this range
			sham_link dictionary				Define a sham link and its parameters
				cost integer			Associate a cost with the sham-link Cost of the sham-link Note, please refer vendor documentation for respective valid values
				destination string			IP addr associated with sham-link destination (A.B.C.D)
				source string			IP addr associated with sham-link source (A.B.C.D)
				ttl_security integer			TTL security check Maximum number of IP hops allowed
			stub dictionary				Specify a stub area Backbone can not be configured as stub area
				no_ext_capability boolean		Choices: no yes	Do not send domain specific capabilities into stub area
				no_summary boolean		Choices: no yes	Do not send summary LSA into stub area
				set boolean		Choices: no yes	Enable a stub area
		auto_cost dictionary					Calculate OSPF interface cost according to bandwidth
			reference_bandwidth integer				Use reference bandwidth method to assign OSPF cost Note, refer vendor documentation for respective valid values
			set boolean			Choices: no yes	Enable OSPF auto-cost
		bfd boolean				Choices: no yes	BFD configuration commands Enable BFD on all interfaces
		capability dictionary					Enable specific OSPF feature
			lls boolean			Choices: no yes	Link-local Signaling (LLS) support
			opaque boolean			Choices: no yes	Opaque LSA
			transit boolean			Choices: no yes	Transit Area
			vrf_lite boolean			Choices: no yes	Do not perform PE specific checks
		compatible dictionary					OSPF router compatibility list
			rfc1583 boolean			Choices: no yes	compatible with RFC 1583
			rfc1587 boolean			Choices: no yes	compatible with RFC 1587
			rfc5243 boolean			Choices: no yes	supports DBD exchange optimization
		default_information dictionary					Control distribution of default information
			always boolean			Choices: no yes	Always advertise default route
			metric integer				OSPF default metric Note, refer vendor documentation for respective valid values
			metric_type integer				OSPF metric type for default routes Note, please refer vendor documentation for respective valid range
			originate boolean			Choices: no yes	Distribute a default route
			route_map string				Route-map reference name
		default_metric integer					Set metric of redistributed routes
		discard_route dictionary					Enable or disable discard-route installation
			external integer				Discard route for redistributed summarised routes Administrative distance for redistributed summarised routes Note, please refer vendor documentation for respective valid range
			internal integer				Discard route for summarised internal routes Administrative distance for summarised internal routes Note, please refer vendor documentation for respective valid range
			set boolean			Choices: no yes	Enable discard-route installation
		distance dictionary					Define an administrative distance
			admin_distance dictionary				OSPF Administrative distance
				acl string			Access-list name/number
				address string			IP Source address
				distance integer			Administrative distance
				wildcard_bits string			Wildcard bits
			ospf dictionary				OSPF distance
				external integer			External type 5 and type 7 routes
				inter_area integer			Inter-area routes
				intra_area integer			Intra-area routes
		distribute_list dictionary					Filter networks in routing updates
			acls list / elements=dictionary				IP access list
				direction string / required		Choices: in out	Filter incoming and outgoing routing updates.
				interface string			Interface configuration (GigabitEthernet A/B) Valid with incoming traffic
				name string / required			IP access list name/number
				protocol string			Protocol config (bgp 1). Valid with outgoing traffic
			prefix dictionary				Filter prefixes in routing updates
				direction string / required		Choices: in out	Filter incoming and outgoing routing updates.
				gateway_name string			Gateway name for filtering incoming updates based on gateway
				interface string			Interface configuration (GigabitEthernet A/B) Valid with incoming traffic
				name string / required			Name of an IP prefix-list
				protocol string			Protocol config (bgp 1). Valid with outgoing traffic
			route_map dictionary				Filter prefixes in routing updates
				name string / required			Route-map name
		domain_id dictionary					OSPF domain-id
			ip_address dictionary				IP address
				address string			OSPF domain ID in IP address format
				secondary boolean		Choices: no yes	Secondary Domain-ID
			null boolean			Choices: no yes	Null Domain-ID
		domain_tag integer					OSPF domain-tag which is OSPF domain tag - 32-bit value Note, please refer vendor documentation for respective valid range
		event_log dictionary					Event Logging
			enable boolean			Choices: no yes	Enable event Logging
			one_shot boolean			Choices: no yes	Disable Logging When Log Buffer Becomes Full
			pause boolean			Choices: no yes	Pause Event Logging
			size integer				Maximum Number of Events Stored in the Event Log Note, refer vendor documentation for respective valid values
		help boolean				Choices: no yes	Description of the interactive help system
		ignore boolean				Choices: no yes	Do not complain about specific event Do not complain upon receiving LSA of the specified type, MOSPF Type 6 LSA
		interface_id boolean				Choices: no yes	Source of the interface ID SNMP MIB ifIndex
		ispf boolean				Choices: no yes	Enable incremental SPF computation
		limit dictionary					Limit a specific OSPF feature and LS update, DBD, and LS request retransmissions
			dc dictionary				Demand circuit retransmissions
				disable boolean		Choices: no yes	Disble the feature
				number integer			The maximum number of retransmissions
			non_dc dictionary				Non-demand-circuit retransmissions
				disable boolean		Choices: no yes	Disble the feature
				number integer			The maximum number of retransmissions
		local_rib_criteria dictionary					Enable or disable usage of local RIB as route criteria
			enable boolean			Choices: no yes	Enable usage of local RIB as route criteria
			forwarding_address boolean			Choices: no yes	Local RIB used to validate external/NSSA forwarding addresses
			inter_area_summary boolean			Choices: no yes	Local RIB used as criteria for inter-area summaries
			nssa_translation boolean			Choices: no yes	Local RIB used as criteria for NSSA translation
		log_adjacency_changes dictionary					Log changes in adjacency state
			detail boolean			Choices: no yes	Log all state changes
			set boolean			Choices: no yes	Log changes in adjacency state
		max_lsa dictionary					Maximum number of non self-generated LSAs to accept
			ignore_count integer				Maximum number of times adjacencies can be suppressed Note, refer vendor documentation for respective valid values
			ignore_time integer				Number of minutes during which all adjacencies are suppressed Note, refer vendor documentation for respective valid values
			number integer				Maximum number of non self-generated LSAs to accept Note, refer vendor documentation for respective valid values
			reset_time integer				Number of minutes after which ignore-count is reset to zero Note, refer vendor documentation for respective valid values
			threshold_value integer				Threshold value (%) at which to generate a warning msg Note, refer vendor documentation for respective valid values
			warning_only boolean			Choices: no yes	Only give a warning message when limit is exceeded
		max_metric dictionary					Set maximum metric
			external_lsa integer				Override external-lsa metric with max-metric value Overriding metric in external-LSAs Note, refer vendor documentation for respective valid values
			include_stub boolean			Choices: no yes	Set maximum metric for stub links in router-LSAs
			on_startup dictionary				Set maximum metric temporarily after reboot
				time integer			Time, in seconds, router-LSAs are originated with max-metric Note, please refer vendor documentation for respective valid range
				wait_for_bgp boolean		Choices: no yes	Let BGP decide when to originate router-LSA with normal metric
			router_lsa boolean / required			Choices: no yes	Maximum metric in self-originated router-LSAs
			summary_lsa integer				Override summary-lsa metric with max-metric value Note, please refer vendor documentation for respective valid range
		maximum_paths integer					Forward packets over multiple paths Number of paths
		mpls dictionary					Configure MPLS routing protocol parameters
			ldp dictionary				routing protocol commands for MPLS LDP
				autoconfig dictionary			routing protocol commands for MPLS LDP
					area string		Configure an OSPF area to run MPLS LDP
					set boolean	Choices: no yes	Configure LDP automatic configuration and set the config
				sync boolean		Choices: no yes	Configure LDP-IGP Synchronization
			traffic_eng dictionary				Let BGP decide when to originate router-LSA with normal metric
				area string			Configure an ospf area to run MPLS Traffic Engineering OSPF area ID as a decimal value or in IP address format
				autoroute_exclude string			MPLS TE autoroute exclude Filter prefixes based on name of an IP prefix-list
				interface dictionary			MPLS TE interface configuration for this OSPF process
					area integer		Advertise MPLS TE information for this interface into area OSPF area ID as a decimal value
					interface_type string		TE Interface configuration (GigabitEthernet A/B)
				mesh_group dictionary			Traffic Engineering Mesh-Group advertisement
					area string		configure flooding scope as area
					id integer		Mesh Group Id
					interface string		Interface configuration (GigabitEthernet A/B)
				multicast_intact boolean		Choices: no yes	MPLS TE and PIM interaction
				router_id_interface string			Router Interface configuration (GigabitEthernet A/B)
		neighbor dictionary					Specify a neighbor router
			address string				Neighbor address (A.B.C.D)
			cost integer				OSPF cost for point-to-multipoint neighbor metric Note, please refer vendor documentation for respective valid range
			database_filter boolean			Choices: no yes	Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor Filter all outgoing LSA
			poll_interval integer				OSPF dead-router polling interval of non-broadcast neighbor in Seconds
			priority integer				OSPF priority of non-broadcast neighbor priority
		network list / elements=dictionary					Enable routing on an IP network
			address string				Network number
			area string				Set the OSPF area ID
			wildcard_bits string				OSPF wild card bits
		nsf dictionary					Non-stop forwarding
			cisco dictionary				Cisco Non-stop forwarding
				disable boolean		Choices: no yes	disable helper support
				helper boolean		Choices: no yes	helper support
			ietf dictionary				IETF graceful restart
				disable boolean		Choices: no yes	disable helper support
				helper boolean		Choices: no yes	helper support
				strict_lsa_checking boolean		Choices: no yes	enable helper strict LSA checking
		passive_interface string					Suppress routing updates on an interface (GigabitEthernet A/B) Interface name with respective interface number
		prefix_suppression boolean				Choices: no yes	Enable prefix suppression
		priority integer					OSPF topology priority Note, refer vendor documentation for respective valid values
		process_id integer / required					Process ID
		queue_depth dictionary					Hello/Router process queue depth
			hello dictionary				OSPF Hello process queue depth
				max_packets integer			maximum number of packets in the queue
				unlimited boolean		Choices: no yes	Unlimited queue depth
			update dictionary				OSPF Router process queue depth
				max_packets integer			maximum number of packets in the queue
				unlimited boolean		Choices: no yes	Unlimited queue depth
		router_id string					Router-id address for this OSPF process OSPF router-id in IP address format (A.B.C.D)
		shutdown boolean				Choices: no yes	Shutdown the router process
		summary_address dictionary					Configure IP address summaries
			address string				IP summary address
			mask string				IP Summary mask
			not_advertise boolean			Choices: no yes	Do not advertise or translate
			nssa_only boolean			Choices: no yes	Limit summary to NSSA areas
			tag integer				Set tag
		timers dictionary					Adjust routing timers
			lsa integer				OSPF LSA timers, arrival timer The minimum interval in milliseconds between accepting the same LSA Note, refer vendor documentation for respective valid values
			pacing dictionary				OSPF pacing timers
				flood integer			OSPF flood pacing timer The minimum interval in msec to pace limit flooding on interface Note, refer vendor documentation for respective valid values
				lsa_group integer			OSPF LSA group pacing timer Interval in sec between group of LSA being refreshed or maxaged Note, refer vendor documentation for respective valid values
				retransmission integer			OSPF retransmission pacing timer The minimum interval in msec between neighbor retransmissions Note, refer vendor documentation for respective valid values
			throttle dictionary				OSPF throttle timers
				lsa dictionary			OSPF LSA throttle timers
					first_delay integer		Delay to generate first occurrence of LSA in milliseconds Note, refer vendor documentation for respective valid values
					max_delay integer		Maximum delay between originating the same LSA in milliseconds Note, refer vendor documentation for respective valid values
					min_delay integer		Minimum delay between originating the same LSA in milliseconds Note, refer vendor documentation for respective valid values
				spf dictionary			OSPF SPF throttle timers - Delay between receiving a change to SPF calculation in milliseconds - Note, refer vendor documentation for respective valid values
					between_delay integer		Delay between first and second SPF calculation in milliseconds Note, refer vendor documentation for respective valid values
					max_delay integer		Maximum wait time in milliseconds for SPF calculations Note, refer vendor documentation for respective valid values
					receive_delay integer		Delay between receiving a change to SPF calculation in milliseconds Note, refer vendor documentation for respective valid values
		traffic_share boolean				Choices: no yes	How to compute traffic share over alternate paths All traffic shared among min metric paths Use different interfaces for equal-cost paths
		ttl_security dictionary					TTL security check
			hops integer				Maximum number of IP hops allowed Note, refer vendor documentation for respective valid values
			set boolean			Choices: no yes	Enable TTL Security on all interfaces
		vrf string					Specify parameters for a VPN Routing/Forwarding instance
running_config string							This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^router ospf. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string						Choices: merged ← replaced overridden deleted gathered parsed rendered	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Notes

Note

• Tested against Cisco IOSv Version 15.2 on VIRL.

Examples

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete provided OSPF V2 processes
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
      - process_id: 200
        vrf: blue
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in

# Using deleted without any config passed (NOTE: This will delete all OSPFV2 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv2:
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospf 200 vrf blue",
#        "no router ospf 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router-ios#

- name: Merge provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: merged

# Commands Fired:
# ---------------
#
#  "commands": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Override provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: overridden

# Commands Fired:
# ---------------
#
# "commands": [
#         "no router ospf 1",
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Replaced provided OSPF V2 configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.4.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 200
        maximum_paths: 15
        ttl_security:
          hops: 7
        areas:
        - area_id: '10'
          default_cost: 10
          authentication:
            message_digest: true
      - process_id: 100
        vrf: ospf_vrf
        domain_id:
          ip_address:
            address: 192.0.5.1
        auto_cost:
          reference_bandwidth: 5
        areas:
        - area_id: '5'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
    state: replaced

# Commands Fired:
# ---------------
# "commands": [
#         "router ospf 100 vrf ospf_vrf",
#         "auto-cost reference-bandwidth 5",
#         "domain-id 192.0.5.1",
#         "area 5 authentication message-digest",
#         "area 5 nssa translate type7 suppress-fa",
#         "area 5 nssa default-information-originate metric 10",
#         "router ospf 200 vrf blue",
#         "no auto-cost reference-bandwidth 4",
#         "no distribute-list 10 out",
#         "no distribute-list 123 in",
#         "domain-id 192.0.4.1",
#         "max-metric router-lsa on-startup 200",
#         "maximum-paths 15",
#         "ttl-security all-interfaces hops 7",
#         "area 10 authentication message-digest",
#         "no area 10 capability default-exclusion",
#         "area 10 default-cost 10"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.4.1
#  max-metric router-lsa on-startup 200
#  ttl-security all-interfaces hops 7
#  area 10 authentication message-digest
#  area 10 default-cost 10
#  maximum-paths 15
# router ospf 100 vrf ospf_vrf
#  domain-id 192.0.5.1
#  auto-cost reference-bandwidth 5
#  area 5 authentication message-digest
#  area 5 nssa default-information-originate metric 10
#  area 5 nssa translate type7 suppress-fa
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 5 capability default-exclusion
#  area 5 authentication
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_in in
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

- name: Gather OSPFV2 provided configurations
  cisco.ios.ios_ospfv2:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "enable": true
#                         },
#                         "capability": true
#                     },
#                     {
#                         "area_id": "10",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "default_cost": 10,
#                         "filter_list": [
#                             {
#                                 "direction": "in",
#                                 "name": "test_prefix_in"
#                             },
#                             {
#                                 "direction": "out",
#                                 "name": "test_prefix_out"
#                             }
#                         ],
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "default_information": {
#                     "originate": true
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "network": {
#                     "address": "198.51.100.0",
#                     "area": "5",
#                     "wildcard_bits": "0.0.0.255"
#                 },
#                 "process_id": 1
#             },
#             {
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "capability": true
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 4
#                 },
#                 "distribute_list": {
#                     "acls": [
#                         {
#                             "direction": "out",
#                             "name": "10"
#                         },
#                         {
#                             "direction": "in",
#                             "name": "123"
#                         }
#                     ]
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.3.1"
#                     }
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 100
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 200,
#                 "vrf": "blue"
#             }
#         ]
#      }

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospf
# router ospf 200 vrf blue
#  domain-id 192.0.3.1
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  area 10 capability default-exclusion
#  distribute-list 10 out
#  distribute-list 123 in
# router ospf 1
#  max-metric router-lsa on-startup 110
#  area 10 authentication message-digest
#  area 10 nssa default-information-originate metric 10
#  area 10 nssa translate type7 suppress-fa
#  area 10 default-cost 10
#  area 10 filter-list prefix test_prefix_out out
#  network 198.51.100.0 0.0.0.255 area 5
#  default-information originate

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv2:
    config:
      processes:
      - process_id: 1
        max_metric:
          router_lsa: true
          on_startup:
            time: 110
        areas:
        - area_id: '5'
          capability: true
          authentication:
            enable: true
        - area_id: '10'
          authentication:
            message_digest: true
          nssa:
            default_information_originate:
              metric: 10
            translate: suppress-fa
          default_cost: 10
          filter_list:
          - name: test_prefix_in
            direction: in
          - name: test_prefix_out
            direction: out
        network:
          address: 198.51.100.0
          wildcard_bits: 0.0.0.255
          area: 5
        default_information:
          originate: true
      - process_id: 200
        vrf: blue
        domain_id:
          ip_address:
            address: 192.0.3.1
        max_metric:
          router_lsa: true
          on_startup:
            time: 100
        auto_cost:
          reference_bandwidth: 4
        areas:
        - area_id: '10'
          capability: true
        distribute_list:
          acls:
          - name: 10
            direction: out
          - name: 123
            direction: in
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "router ospf 200 vrf blue",
#         "auto-cost reference-bandwidth 4",
#         "distribute-list 10 out",
#         "distribute-list 123 in",
#         "domain-id 192.0.3.1",
#         "max-metric router-lsa on-startup 100",
#         "area 10 capability default-exclusion",
#         "router ospf 1",
#         "default-information originate",
#         "max-metric router-lsa on-startup 110",
#         "network 198.51.100.0 0.0.0.255 area 5",
#         "area 10 authentication message-digest",
#         "area 10 default-cost 10",
#         "area 10 nssa translate type7 suppress-fa",
#         "area 10 nssa default-information-originate metric 10",
#         "area 10 filter-list prefix test_prefix_out out",
#         "area 10 filter-list prefix test_prefix_in in",
#         "area 5 authentication",
#         "area 5 capability default-exclusion"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospf 100
#  auto-cost reference-bandwidth 5
#  domain-id 192.0.5.1
#  area 5 authentication message-digest
#  area 5 nssa translate type7 suppress-fa
#  area 5 nssa default-information-originate metric 10

- name: Parse the provided configuration with the exisiting running configuration
  cisco.ios.ios_ospfv2:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "processes": [
#             {
#                 "areas": [
#                     {
#                         "area_id": "5",
#                         "authentication": {
#                             "message_digest": true
#                         },
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             },
#                             "translate": "suppress-fa"
#                         }
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 5
#                 },
#                 "domain_id": {
#                     "ip_address": {
#                         "address": "192.0.5.1"
#                     }
#                 },
#                 "process_id": 100
#             }
#         ]
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after dictionary	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before dictionary	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list / elements=string	always	The set of commands pushed to the remote device. Sample: ['router ospf 200 vrf blue', 'auto-cost reference-bandwidth 5', 'domain-id 192.0.4.1']

Authors

• Sumit Jaiswal (@justjais)