cisco.iosxr.iosxr_user – Manage the aggregate of local users on Cisco IOS XR device¶

Note

This plugin is part of the cisco.iosxr collection (version 1.2.1).

To install it use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_user.

New in version 1.0.0: of cisco.iosxr

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis ¶

This module provides declarative management of the local usernames configured on network devices. It allows playbooks to manage either individual usernames or the aggregate of usernames in the current running config. It also supports purging usernames from the configuration that are not explicitly defined.

Note

This module has a corresponding action plugin.

Requirements ¶

The below requirements are needed on the host that executes this module.

ncclient >= 0.5.3 when using netconf
lxml >= 4.1.1 when using netconf
base64 when using public_key_contents or public_key
paramiko when using public_key_contents or public_key

Parameters ¶

Parameter		Choices/Defaults	Comments
admin boolean		Choices: no ← yes	Enters into administration configuration mode for making config changes to the device. Applicable only when using network_cli transport
aggregate list / elements=dictionary			The set of username objects to be configured on the remote Cisco IOS XR device. The list entries can either be the username or a hash of username and properties. This argument is mutually exclusive with the `name` argument. aliases: users, collection
	admin boolean	Choices: no yes	Enters into administration configuration mode for making config changes to the device. Applicable only when using network_cli transport
	configured_password string		The password to be configured on the Cisco IOS XR device. The password needs to be provided in clear text. Password is encrypted on the device when used with cli and by Ansible when used with netconf using the same MD5 hash technique with salt size of 3. Please note that this option is not same as `provider password`.
	group string		Configures the group for the username in the device running configuration. The argument accepts a string value defining the group name. This argument does not check if the group has been configured on the device. aliases: role
	groups list / elements=string		Configures the groups for the username in the device running configuration. The argument accepts a list of group names. This argument does not check if the group has been configured on the device. It is similar to the aggregate command for usernames, but lets you configure multiple groups for the user(s).
	name string / required		The username to be configured on the Cisco IOS XR device. This argument accepts a string value and is mutually exclusive with the `aggregate` argument. Please note that this option is not same as `provider username`.
	public_key string		Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key_contents. If used with multiple users in aggregates, then the same key file is used for all users.
	public_key_contents string		Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key.If used with multiple users in aggregates, then the same key file is used for all users.
	state string	Choices: present absent	Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration
	update_password string	Choices: on_create always	Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to `always`, the password will always be updated in the device and when set to `on_create` the password will be updated only if the username is created.
configured_password string			The password to be configured on the Cisco IOS XR device. The password needs to be provided in clear text. Password is encrypted on the device when used with cli and by Ansible when used with netconf using the same MD5 hash technique with salt size of 3. Please note that this option is not same as `provider password`.
group string			Configures the group for the username in the device running configuration. The argument accepts a string value defining the group name. This argument does not check if the group has been configured on the device. aliases: role
groups list / elements=string			Configures the groups for the username in the device running configuration. The argument accepts a list of group names. This argument does not check if the group has been configured on the device. It is similar to the aggregate command for usernames, but lets you configure multiple groups for the user(s).
name string			The username to be configured on the Cisco IOS XR device. This argument accepts a string value and is mutually exclusive with the `aggregate` argument. Please note that this option is not same as `provider username`.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the Network Guide. A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: cli ← netconf	Specifies the type of connection based transport.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
public_key string			Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key_contents. If used with multiple users in aggregates, then the same key file is used for all users.
public_key_contents string			Configures the contents of the public keyfile to upload to the IOS-XR node. This enables users to login using the accompanying private key. IOS-XR only accepts base64 decoded files, so this will be decoded and uploaded to the node. Do note that this requires an OpenSSL public key file, PuTTy generated files will not work! Mutually exclusive with public_key.If used with multiple users in aggregates, then the same key file is used for all users.
purge boolean		Choices: no ← yes	Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user and the current defined set of users.
state string		Choices: present ← absent	Configures the state of the username definition as it relates to the device operational configuration. When set to present, the username(s) should be configured in the device active configuration and when set to absent the username(s) should not be in the device active configuration
update_password string		Choices: on_create always ←	Since passwords are encrypted in the device running config, this argument will instruct the module when to change the password. When set to `always`, the password will always be updated in the device and when set to `on_create` the password will be updated only if the username is created.

Notes ¶

Note

This module works with connection network_cli and netconf. See the IOS-XR Platform Options.
Tested against IOS XRv 6.1.3
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: create a new user
  cisco.iosxr.iosxr_user:
    name: ansible
    configured_password: mypassword
    state: present
- name: create a new user in admin configuration mode
  cisco.iosxr.iosxr_user:
    name: ansible
    configured_password: mypassword
    admin: true
    state: present
- name: remove all users except admin
  cisco.iosxr.iosxr_user:
    purge: true
- name: set multiple users to group sys-admin
  cisco.iosxr.iosxr_user:
    aggregate:
    - name: netop
    - name: netend
    group: sysadmin
    state: present
- name: set multiple users to multiple groups
  cisco.iosxr.iosxr_user:
    aggregate:
    - name: netop
    - name: netend
    groups:
    - sysadmin
    - root-system
    state: present
- name: Change Password for User netop
  cisco.iosxr.iosxr_user:
    name: netop
    configured_password: '{{ new_password }}'
    update_password: always
    state: present
- name: Add private key authentication for user netop
  cisco.iosxr.iosxr_user:
    name: netop
    state: present
    public_key_contents: "{{ lookup('file', '/home/netop/.ssh/id_rsa.pub' }}"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always	The list of configuration mode commands to send to the device Sample: ['username ansible secret password group sysadmin', 'username admin secret admin']
xml list / elements=string	always (empty list when no xml rpc to send)	NetConf rpc xml sent to device with transport `netconf` Sample: ['<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0"> <aaa xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-lib-cfg"> <usernames xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-aaa-locald-cfg"> <username xc:operation="merge"> <name>test7</name> <usergroup-under-usernames> <usergroup-under-username> <name>sysadmin</name> </usergroup-under-username> </usergroup-under-usernames> <secret>$1$ZsXC$zZ50wqhDC543ZWQkkAHLW0</secret> </username> </usernames> </aaa> </config>']

Authors¶

Trishna Guha (@trishnaguha)
Sebastiaan van Doesselaar (@sebasdoes)
Kedar Kekan (@kedarX)

cisco.iosxr.iosxr_user – Manage the aggregate of local users on Cisco IOS XR device¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Authors¶

Synopsis ¶

Requirements ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶