cisco.nxos.nxos_vlan – (deprecated, removed after 2022-06-01) Manages VLAN resources and attributes.¶

Note

This plugin is part of the cisco.nxos collection (version 1.4.0).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_vlan.

New in version 1.0.0: of cisco.nxos

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED ¶

Removed in: major release after 2022-06-01
Why: Updated modules released with more functionality
Alternative: nxos_vlans

Synopsis ¶

Manages VLAN configurations on NX-OS switches.

Note

This module has a corresponding action plugin.

Parameters ¶

Parameter		Choices/Defaults	Comments
admin_state string		Choices: up ← down	Manage the VLAN administrative state of the VLAN equivalent to shut/no shut in VLAN config mode.
aggregate list / elements=dictionary			List of VLANs definitions.
	admin_state string	Choices: up down	Manage the VLAN administrative state of the VLAN equivalent to shut/no shut in VLAN config mode.
	associated_interfaces list / elements=string		This is a intent option and checks the operational state of the for given vlan `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vlan interfaces on device it will result in failure.
	delay integer		Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
	interfaces list / elements=string		List of interfaces that should be associated to the VLAN or keyword 'default'.
	mapped_vni string		The Virtual Network Identifier (VNI) ID that is mapped to the VLAN. Valid values are integer and keyword 'default'. Range 4096-16773119.
	mode string	Choices: ce fabricpath	Set VLAN mode to classical ethernet or fabricpath. This is a valid option for Nexus 5000 and 7000 series.
	name string		Name of VLAN or keyword 'default'.
	state string	Choices: present absent	Manage the state of the resource.
	vlan_id integer / required		Single VLAN ID.
	vlan_range string		Range of VLANs such as 2-10 or 2,5,10-15, etc.
	vlan_state string	Choices: active suspend	Manage the vlan operational state of the VLAN
associated_interfaces list / elements=string			This is a intent option and checks the operational state of the for given vlan `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vlan interfaces on device it will result in failure.
delay integer		Default: 10	Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
interfaces list / elements=string			List of interfaces that should be associated to the VLAN or keyword 'default'.
mapped_vni string			The Virtual Network Identifier (VNI) ID that is mapped to the VLAN. Valid values are integer and keyword 'default'. Range 4096-16773119.
mode string		Choices: ce ← fabricpath	Set VLAN mode to classical ethernet or fabricpath. This is a valid option for Nexus 5000 and 7000 series.
name string			Name of VLAN or keyword 'default'.
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. Starting with Ansible 2.6 we recommend using `connection: httpapi` for NX-API. This option will be removed in a release after 2022-06-01. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	transport string	Choices: cli ← nxapi	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
	use_proxy boolean	Choices: no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	use_ssl boolean	Choices: no ← yes	Configures the transport to use SSL if set to `yes` only when the `transport=nxapi`, otherwise this value is ignored.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	validate_certs boolean	Choices: no ← yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
purge boolean		Choices: no ← yes	Purge VLANs not defined in the aggregate parameter. This parameter can be used without aggregate as well. Removal of Vlan 1 is not allowed and will be ignored by purge.
state string		Choices: present ← absent	Manage the state of the resource.
vlan_id integer			Single VLAN ID.
vlan_range string			Range of VLANs such as 2-10 or 2,5,10-15, etc.
vlan_state string		Choices: active ← suspend	Manage the vlan operational state of the VLAN

Notes ¶

Note

For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: Ensure a range of VLANs are not present on the switch
  cisco.nxos.nxos_vlan:
    vlan_range: 2-10,20,50,55-60,100-150
    state: absent

- name: Ensure VLAN 50 exists with the name WEB and is in the shutdown state
  cisco.nxos.nxos_vlan:
    vlan_id: 50
    admin_state: down
    name: WEB

- name: Ensure VLAN is NOT on the device
  cisco.nxos.nxos_vlan:
    vlan_id: 50
    state: absent

- name: Add interfaces to VLAN and check intent (config + intent)
  cisco.nxos.nxos_vlan:
    vlan_id: 100
    interfaces:
    - Ethernet2/1
    - Ethernet2/5
    associated_interfaces:
    - Ethernet2/1
    - Ethernet2/5

- name: Check interfaces assigned to VLAN
  cisco.nxos.nxos_vlan:
    vlan_id: 100
    associated_interfaces:
    - Ethernet2/1
    - Ethernet2/5

- name: Create aggregate of vlans
  cisco.nxos.nxos_vlan:
    aggregate:
    - {vlan_id: 4000, mode: ce}
    - {vlan_id: 4001, name: vlan-4001}

- name: purge vlans - removes all other vlans except the ones mentioned in aggregate)
  cisco.nxos.nxos_vlan:
    aggregate:
    - vlan_id: 1
    - vlan_id: 4001
    purge: yes

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always	Set of command strings to send to the remote device Sample: ['vlan 20', 'vlan 55', 'vn-segment 5000']

Status ¶

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors¶

Jason Edelman (@jedelman8)

cisco.nxos.nxos_vlan – (deprecated, removed after 2022-06-01) Manages VLAN resources and attributes.¶

DEPRECATED¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶

Authors¶

DEPRECATED ¶

Synopsis ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶

Status ¶