cisco.nxos.nxos_vrf – Manages global VRF configuration.¶

Note

This plugin is part of the cisco.nxos collection (version 1.4.0).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_vrf.

New in version 1.0.0: of cisco.nxos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis ¶

This module provides declarative management of VRFs on CISCO NXOS network devices.

Note

This module has a corresponding action plugin.

Parameters ¶

Parameter		Choices/Defaults	Comments
admin_state string		Choices: up ← down	Administrative state of the VRF.
aggregate list / elements=dictionary			List of VRFs definitions.
	admin_state string	Choices: up down	Administrative state of the VRF.
	associated_interfaces list / elements=string		This is a intent option and checks the operational state of the for given vrf `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vrf interfaces on device it will result in failure.
	delay integer		Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
	description string		Description of the VRF or keyword 'default'.
	interfaces list / elements=string		List of interfaces to check the VRF has been configured correctly or keyword 'default'.
	name string		Name of VRF to be managed. aliases: vrf
	rd string		VPN Route Distinguisher (RD). Valid values are a string in one of the route-distinguisher formats (ASN2:NN, ASN4:NN, or IPV4:NN); the keyword 'auto', or the keyword 'default'.
	state string	Choices: present absent	Manages desired state of the resource.
	vni string		Specify virtual network identifier. Valid values are Integer or keyword 'default'.
associated_interfaces list / elements=string			This is a intent option and checks the operational state of the for given vrf `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vrf interfaces on device it will result in failure.
delay integer		Default: 10	Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state arguments.
description string			Description of the VRF or keyword 'default'.
interfaces list / elements=string			List of interfaces to check the VRF has been configured correctly or keyword 'default'.
name string			Name of VRF to be managed. aliases: vrf
provider dictionary			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. Starting with Ansible 2.6 we recommend using `connection: httpapi` for NX-API. This option will be removed in a release after 2022-06-01. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port integer		Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	transport string	Choices: cli ← nxapi	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
	use_proxy boolean	Choices: no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	use_ssl boolean	Choices: no ← yes	Configures the transport to use SSL if set to `yes` only when the `transport=nxapi`, otherwise this value is ignored.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	validate_certs boolean	Choices: no ← yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
purge boolean		Choices: no ← yes	Purge VRFs not defined in the aggregate parameter.
rd string			VPN Route Distinguisher (RD). Valid values are a string in one of the route-distinguisher formats (ASN2:NN, ASN4:NN, or IPV4:NN); the keyword 'auto', or the keyword 'default'.
state string		Choices: present ← absent	Manages desired state of the resource.
vni string			Specify virtual network identifier. Valid values are Integer or keyword 'default'.

Notes ¶

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
Cisco NX-OS creates the default VRF by itself. Therefore, you’re not allowed to use default as vrf name in this module.
vrf name must be shorter than 32 chars.
VRF names are not case sensible in NX-OS. Anyway, the name is stored just like it’s inserted by the user and it’ll not be changed again unless the VRF is removed and re-created. i.e. vrf=NTC will create a VRF named NTC, but running it again with vrf=ntc will not cause a configuration change.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: Ensure ntc VRF exists on switch
  cisco.nxos.nxos_vrf:
    name: ntc
    description: testing
    state: present

- name: Aggregate definition of VRFs
  cisco.nxos.nxos_vrf:
    aggregate:
    - {name: test1, description: Testing, admin_state: down}
    - {name: test2, interfaces: Ethernet1/2}

- name: Aggregate definitions of VRFs with Purge
  cisco.nxos.nxos_vrf:
    aggregate:
    - {name: ntc1, description: purge test1}
    - {name: ntc2, description: purge test2}
    state: present
    purge: yes

- name: Delete VRFs exist on switch
  cisco.nxos.nxos_vrf:
    aggregate:
    - {name: ntc1}
    - {name: ntc2}
    state: absent

- name: Assign interfaces to VRF declaratively
  cisco.nxos.nxos_vrf:
    name: test1
    interfaces:
    - Ethernet2/3
    - Ethernet2/5

- name: Check interfaces assigned to VRF
  cisco.nxos.nxos_vrf:
    name: test1
    associated_interfaces:
    - Ethernet2/3
    - Ethernet2/5

- name: Ensure VRF is tagged with interface Ethernet2/5 only (Removes from Ethernet2/3)
  cisco.nxos.nxos_vrf:
    name: test1
    interfaces:
    - Ethernet2/5

- name: Delete VRF
  cisco.nxos.nxos_vrf:
    name: ntc
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always	commands sent to the device Sample: ['vrf context ntc', 'no shutdown', 'interface Ethernet1/2', 'no switchport', 'vrf member test2']

Authors¶

Jason Edelman (@jedelman8)
Gabriele Gerbino (@GGabriele)
Trishna Guha (@trishnaguha)

cisco.nxos.nxos_vrf – Manages global VRF configuration.¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Authors¶

Synopsis ¶

Parameters ¶

Notes ¶

Examples ¶

Return Values ¶