cisco.nxos.nxos_vxlan_vtep_vni – Creates a Virtual Network Identifier member (VNI)

Note

This plugin is part of the cisco.nxos collection (version 1.4.0).

To install it use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_vxlan_vtep_vni.

New in version 1.0.0: of cisco.nxos

Synopsis

  • Creates a Virtual Network Identifier member (VNI) for an NVE overlay interface.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
assoc_vrf
boolean
    Choices:
  • no
  • yes
This attribute is used to identify and separate processing VNIs that are associated with a VRF and used for routing. The VRF and VNI specified with this command must match the configuration of the VNI under the VRF.
ingress_replication
string
    Choices:
  • bgp
  • static
  • default
Specifies mechanism for host reachability advertisement.
interface
string / required
Interface name for the VXLAN Network Virtualization Endpoint.
multicast_group
string
The multicast group (range) of the VNI. Valid values are string and keyword 'default'.
multisite_ingress_replication
string
added in 1.1.0 of cisco.nxos
    Choices:
  • disable
  • enable
  • optimized
Enables multisite ingress replication.
peer_list
list / elements=string
Set the ingress-replication static peer list. Valid values are an array, a space-separated string of ip addresses, or the keyword 'default'.
provider
dictionary
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
Starting with Ansible 2.6 we recommend using connection: httpapi for NX-API.
This option will be removed in a release after 2022-06-01.
For more information please see the NXOS Platform Options guide.

A dict object containing connection details.
auth_pass
string
Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize
boolean
    Choices:
  • no ←
  • yes
Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port
integer
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile
string
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport
string
    Choices:
  • cli ←
  • nxapi
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
use_proxy
boolean
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
use_ssl
boolean
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to yes only when the transport=nxapi, otherwise this value is ignored.
username
string
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
validate_certs
boolean
    Choices:
  • no ←
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
state
string
    Choices:
  • present ←
  • absent
Determines whether the config should be present or not on the device.
suppress_arp
boolean
    Choices:
  • no
  • yes
Suppress arp under layer 2 VNI.
suppress_arp_disable
boolean
    Choices:
  • no
  • yes
Overrides the global ARP suppression config. This is available on NX-OS 9K series running 9.2.x or higher.
vni
string / required
ID of the Virtual Network Identifier.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL

  • default, where supported, restores params default value.

  • For information on using CLI and NX-API see the NXOS Platform Options guide

  • For more information on using Ansible to manage network devices see the Ansible Network Guide

  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- cisco.nxos.nxos_vxlan_vtep_vni:
    interface: nve1
    vni: 6000
    ingress_replication: default
    multisite_ingress_replication: enable

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always
commands sent to the device

Sample:
['interface nve1', 'member vni 6000', 'multisite ingress-replication']


Authors

  • Gabriele Gerbino (@GGabriele)