community.aws.elb_application_lb – Manage an Application Load Balancer¶

Note

This plugin is part of the community.aws collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.aws.

To use it in a playbook, specify: community.aws.elb_application_lb.

New in version 1.0.0: of community.aws

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis ¶

Manage an AWS Application Elastic Load Balancer. See https://aws.amazon.com/blogs/aws/new-aws-application-load-balancer/ for details.

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
python >= 2.6

Parameters ¶

Parameter			Choices/Defaults	Comments
access_logs_enabled boolean			Choices: no yes	Whether or not to enable access logs. When set, access_logs_s3_bucket must also be set.
access_logs_s3_bucket string				The name of the S3 bucket for the access logs. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permission to write to the bucket. Required if access logs in Amazon S3 are enabled. When set, access_logs_enabled must also be set.
access_logs_s3_prefix string				The prefix for the log location in the S3 bucket. If you don't specify a prefix, the access logs are stored in the root of the bucket. Cannot begin or end with a slash.
aws_access_key string				AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_access_key, access_key
aws_ca_bundle path				The location of a CA Bundle to use when validating SSL certificates. Only used for boto3 based modules. Note: The CA Bundle is read 'module' side and may need to be explicitly copied from the controller if not run locally.
aws_config dictionary				A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the 'user_agent' key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration.
aws_secret_key string				AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_secret_key, secret_key
debug_botocore_endpoint_logs boolean			Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
deletion_protection boolean			Choices: no yes	Indicates whether deletion protection for the ELB is enabled. Defaults to `false`.
ec2_url string				Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. aliases: aws_endpoint_url, endpoint_url
http2 boolean			Choices: no yes	Indicates whether to enable HTTP2 routing. Defaults to `false`.
idle_timeout integer				The number of seconds to wait before an idle connection is closed.
listeners list / elements=dictionary				A list of dicts containing listeners to attach to the ELB. See examples for detail of the dict required. Note that listener keys are CamelCased.
	Certificates list / elements=dictionary			The SSL server certificate.
		CertificateArn string		The Amazon Resource Name (ARN) of the certificate.
	DefaultActions list / elements=dictionary / required			The default actions for the listener.
		TargetGroupArn string		The Amazon Resource Name (ARN) of the target group.
		Type string		The type of action.
	Port integer / required			The port on which the load balancer is listening.
	Protocol string / required			The protocol for connections from clients to the load balancer.
	Rules list / elements=dictionary			A list of ALB Listener Rules. For the complete documentation of possible Conditions and Actions please see the boto3 documentation: https://boto3.amazonaws.com/v1/documentation/api/latest/reference/services/elbv2.html#ElasticLoadBalancingv2.Client.create_rule
		Actions list / elements=string		Actions to apply if all of the rule's conditions are met.
		Conditions list / elements=string		Conditions which must be met for the actions to be applied.
		Priority integer		The rule priority.
	SslPolicy string			The security policy that defines which ciphers and protocols are supported.
name string / required				The name of the load balancer. This name must be unique within your AWS account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
profile string				Uses a boto profile. Only works with boto >= 2.24.0. Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. aliases: aws_profile
purge_listeners boolean			Choices: no yes ←	If `yes`, existing listeners will be purged from the ELB to match exactly what is defined by listeners parameter. If the listeners parameter is not set then listeners will not be modified.
purge_rules boolean			Choices: no yes ←	When set to `no`, keep the existing load balancer rules in place. Will modify and add, but will not delete.
purge_tags boolean			Choices: no yes ←	If yes, existing tags will be purged from the resource to match exactly what is defined by tags parameter. If the tags parameter is not set then tags will not be modified.
region string				The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
scheme string			Choices: internet-facing ← internal	Internet-facing or internal load balancer. An ELB scheme can not be modified after creation.
security_groups list / elements=string			Default: []	A list of the names or IDs of the security groups to assign to the load balancer. Required if state=present.
security_token string				AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: aws_security_token, access_token
state string			Choices: present ← absent	Create or destroy the load balancer.
subnets list / elements=string				A list of the IDs of the subnets to attach to the load balancer. You can specify only one subnet per Availability Zone. You must specify subnets from at least two Availability Zones. Required if state=present.
tags dictionary				A dictionary of one or more tags to assign to the load balancer.
validate_certs boolean			Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
wait boolean			Choices: no ← yes	Wait for the load balancer to have a state of 'active' before completing. A status check is performed every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.
wait_timeout integer				The time in seconds to use in conjunction with wait.

Notes ¶

Note

Listeners are matched based on port. If a listener’s port is changed then a new listener will be created.
Listener rules are matched based on priority. If a rule’s priority is changed then a new rule will be created.
If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_PROFILE or AWS_DEFAULT_PROFILE, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION, AWS_CA_BUNDLE
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# Note: These examples do not set authentication details, see the AWS Guide for details.

# Create an ELB and attach a listener
- community.aws.elb_application_lb:
    name: myelb
    security_groups:
      - sg-12345678
      - my-sec-group
    subnets:
      - subnet-012345678
      - subnet-abcdef000
    listeners:
      - Protocol: HTTP # Required. The protocol for connections from clients to the load balancer (HTTP or HTTPS) (case-sensitive).
        Port: 80 # Required. The port on which the load balancer is listening.
        # The security policy that defines which ciphers and protocols are supported. The default is the current predefined security policy.
        SslPolicy: ELBSecurityPolicy-2015-05
        Certificates: # The ARN of the certificate (only one certficate ARN should be provided)
          - CertificateArn: arn:aws:iam::12345678987:server-certificate/test.domain.com
        DefaultActions:
          - Type: forward # Required.
            TargetGroupName: # Required. The name of the target group
    state: present

# Create an ELB and attach a listener with logging enabled
- community.aws.elb_application_lb:
    access_logs_enabled: yes
    access_logs_s3_bucket: mybucket
    access_logs_s3_prefix: "logs"
    name: myelb
    security_groups:
      - sg-12345678
      - my-sec-group
    subnets:
      - subnet-012345678
      - subnet-abcdef000
    listeners:
      - Protocol: HTTP # Required. The protocol for connections from clients to the load balancer (HTTP or HTTPS) (case-sensitive).
        Port: 80 # Required. The port on which the load balancer is listening.
        # The security policy that defines which ciphers and protocols are supported. The default is the current predefined security policy.
        SslPolicy: ELBSecurityPolicy-2015-05
        Certificates: # The ARN of the certificate (only one certficate ARN should be provided)
          - CertificateArn: arn:aws:iam::12345678987:server-certificate/test.domain.com
        DefaultActions:
          - Type: forward # Required.
            TargetGroupName: # Required. The name of the target group
    state: present

# Create an ALB with listeners and rules
- community.aws.elb_application_lb:
    name: test-alb
    subnets:
      - subnet-12345678
      - subnet-87654321
    security_groups:
      - sg-12345678
    scheme: internal
    listeners:
      - Protocol: HTTPS
        Port: 443
        DefaultActions:
          - Type: forward
            TargetGroupName: test-target-group
        Certificates:
          - CertificateArn: arn:aws:iam::12345678987:server-certificate/test.domain.com
        SslPolicy: ELBSecurityPolicy-2015-05
        Rules:
          - Conditions:
              - Field: path-pattern
                Values:
                  - '/test'
            Priority: '1'
            Actions:
              - TargetGroupName: test-target-group
                Type: forward
          - Conditions:
              - Field: path-pattern
                Values:
                  - "/redirect-path/*"
            Priority: '2'
            Actions:
              - Type: redirect
                RedirectConfig:
                  Host: "#{host}"
                  Path: "/example/redir" # or /#{path}
                  Port: "#{port}"
                  Protocol: "#{protocol}"
                  Query: "#{query}"
                  StatusCode: "HTTP_302" # or HTTP_301
          - Conditions:
              - Field: path-pattern
                Values:
                  - "/fixed-response-path/"
            Priority: '3'
            Actions:
              - Type: fixed-response
                FixedResponseConfig:
                  ContentType: "text/plain"
                  MessageBody: "This is the page you're looking for"
                  StatusCode: "200"
          - Conditions:
              - Field: host-header
                Values:
                  - "hostname.domain.com"
                  - "alternate.domain.com"
            Priority: '4'
            Actions:
              - TargetGroupName: test-target-group
                Type: forward
    state: present

# Remove an ELB
- community.aws.elb_application_lb:
    name: myelb
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key			Returned	Description
access_logs_s3_bucket string			when state is present	The name of the S3 bucket for the access logs. Sample: mys3bucket
access_logs_s3_enabled string			when state is present	Indicates whether access logs stored in Amazon S3 are enabled. Sample: True
access_logs_s3_prefix string			when state is present	The prefix for the location in the S3 bucket. Sample: my/logs
availability_zones list / elements=string			when state is present	The Availability Zones for the load balancer. Sample: [{'subnet_id': 'subnet-aabbccddff', 'zone_name': 'ap-southeast-2a'}]
canonical_hosted_zone_id string			when state is present	The ID of the Amazon Route 53 hosted zone associated with the load balancer. Sample: ABCDEF12345678
created_time string			when state is present	The date and time the load balancer was created. Sample: 2015-02-12T02:14:02+00:00
deletion_protection_enabled string			when state is present	Indicates whether deletion protection is enabled. Sample: True
dns_name string			when state is present	The public DNS name of the load balancer. Sample: internal-my-elb-123456789.ap-southeast-2.elb.amazonaws.com
idle_timeout_timeout_seconds integer			when state is present	The idle timeout value, in seconds. Sample: 60
ip_address_type string			when state is present	The type of IP addresses used by the subnets for the load balancer. Sample: ipv4
listeners complex			when state is present	Information about the listeners.
	certificates complex		when state is present	The SSL server certificate.
		certificate_arn string	when state is present	The Amazon Resource Name (ARN) of the certificate.
	default_actions string		when state is present	The default actions for the listener.
		target_group_arn string	when state is present	The Amazon Resource Name (ARN) of the target group.
		type string	when state is present	The type of action.
	listener_arn string		when state is present	The Amazon Resource Name (ARN) of the listener.
	load_balancer_arn string		when state is present	The Amazon Resource Name (ARN) of the load balancer.
	port integer		when state is present	The port on which the load balancer is listening. Sample: 80
	protocol string		when state is present	The protocol for connections from clients to the load balancer. Sample: HTTPS
	ssl_policy string		when state is present	The security policy that defines which ciphers and protocols are supported.
load_balancer_arn string			when state is present	The Amazon Resource Name (ARN) of the load balancer. Sample: arn:aws:elasticloadbalancing:ap-southeast-2:0123456789:loadbalancer/app/my-elb/001122334455
load_balancer_name string			when state is present	The name of the load balancer. Sample: my-elb
routing_http2_enabled string			when state is present	Indicates whether HTTP/2 is enabled. Sample: True
scheme string			when state is present	Internet-facing or internal load balancer. Sample: internal
security_groups list / elements=string			when state is present	The IDs of the security groups for the load balancer. Sample: ['sg-0011223344']
state dictionary			when state is present	The state of the load balancer. Sample: {'code': 'active'}
tags dictionary			when state is present	The tags attached to the load balancer. Sample: { 'Tag': 'Example' }
type string			when state is present	The type of load balancer. Sample: application
vpc_id string			when state is present	The ID of the VPC for the load balancer. Sample: vpc-0011223344

Authors¶

Rob White (@wimnat)

community.aws.elb_application_lb – Manage an Application Load Balancer¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶