community.aws.elb_target_info – Gathers which target groups a target is associated with.¶

Note

This plugin is part of the community.aws collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.aws.

To use it in a playbook, specify: community.aws.elb_target_info.

New in version 1.0.0: of community.aws

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis ¶

This module will search through every target group in a region to find which ones have registered a given instance ID or IP.
This module was called elb_target_facts before Ansible 2.9. The usage did not change.

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
botocore
python >= 2.6

Parameters ¶

Parameter	Choices/Defaults	Comments
aws_access_key string		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_access_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_access_key, access_key
aws_ca_bundle path		The location of a CA Bundle to use when validating SSL certificates. Only used for boto3 based modules. Note: The CA Bundle is read 'module' side and may need to be explicitly copied from the controller if not run locally.
aws_config dictionary		A dictionary to modify the botocore configuration. Parameters can be found at https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. Only the 'user_agent' key is used for boto modules. See http://boto.cloudhackers.com/en/latest/boto_config_tut.html#boto for more boto configuration.
aws_secret_key string		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. If profile is set this parameter is ignored. Passing the aws_secret_key and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: ec2_secret_key, secret_key
debug_botocore_endpoint_logs boolean	Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
ec2_url string		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used. aliases: aws_endpoint_url, endpoint_url
get_unused_target_groups boolean	Choices: no yes ←	Whether or not to get target groups not used by any load balancers.
instance_id string / required		What instance ID to get information for.
profile string		Uses a boto profile. Only works with boto >= 2.24.0. Using profile will override aws_access_key, aws_secret_key and security_token and support for passing them at the same time as profile has been deprecated. aws_access_key, aws_secret_key and security_token will be made mutually exclusive with profile after 2022-06-01. aliases: aws_profile
region string		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token string		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. If profile is set this parameter is ignored. Passing the security_token and profile options at the same time has been deprecated and the options will be made mutually exclusive after 2022-06-01. aliases: aws_security_token, access_token
validate_certs boolean	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_PROFILE or AWS_DEFAULT_PROFILE, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION, AWS_CA_BUNDLE
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

# practical use case - dynamically de-registering and re-registering nodes

  - name: Get EC2 Metadata
    amazon.aws.ec2_metadata_facts:

  - name: Get initial list of target groups
    delegate_to: localhost
    community.aws.elb_target_info:
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_info

  - name: save fact for later
    ansible.builtin.set_fact:
      original_tgs: "{{ target_info.instance_target_groups }}"

  - name: Deregister instance from all target groups
    delegate_to: localhost
    community.aws.elb_target:
        target_group_arn: "{{ item.0.target_group_arn }}"
        target_port: "{{ item.1.target_port }}"
        target_az: "{{ item.1.target_az }}"
        target_id: "{{ item.1.target_id }}"
        state: absent
        target_status: "draining"
        region: "{{ ansible_ec2_placement_region }}"
    with_subelements:
      - "{{ original_tgs }}"
      - "targets"

    # This avoids having to wait for 'elb_target' to serially deregister each
    # target group.  An alternative would be to run all of the 'elb_target'
    # tasks async and wait for them to finish.

  - name: wait for all targets to deregister simultaneously
    delegate_to: localhost
    community.aws.elb_target_info:
      get_unused_target_groups: false
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_info
    until: (target_info.instance_target_groups | length) == 0
    retries: 60
    delay: 10

  - name: reregister in elbv2s
    community.aws.elb_target:
      region: "{{ ansible_ec2_placement_region }}"
      target_group_arn: "{{ item.0.target_group_arn }}"
      target_port: "{{ item.1.target_port }}"
      target_az: "{{ item.1.target_az }}"
      target_id: "{{ item.1.target_id }}"
      state: present
      target_status: "initial"
    with_subelements:
      - "{{ original_tgs }}"
      - "targets"

  # wait until all groups associated with this instance are 'healthy' or
  # 'unused'
  - name: wait for registration
    community.aws.elb_target_info:
      get_unused_target_groups: false
      instance_id: "{{ ansible_ec2_instance_id }}"
      region: "{{ ansible_ec2_placement_region }}"
    register: target_info
    until: (target_info.instance_target_groups |
            map(attribute='targets') |
            flatten |
            map(attribute='target_health') |
            rejectattr('state', 'equalto', 'healthy') |
            rejectattr('state', 'equalto', 'unused') |
            list |
            length) == 0
    retries: 61
    delay: 10

# using the target groups to generate AWS CLI commands to reregister the
# instance - useful in case the playbook fails mid-run and manual
#            rollback is required
  - name: "reregistration commands: ELBv2s"
    ansible.builtin.debug:
      msg: >
             aws --region {{ansible_ec2_placement_region}} elbv2
             register-targets --target-group-arn {{item.target_group_arn}}
             --targets{%for target in item.targets%}
             Id={{target.target_id}},
             Port={{target.target_port}}{%if target.target_az%},AvailabilityZone={{target.target_az}}
             {%endif%}
             {%endfor%}
    loop: "{{target_info.instance_target_groups}}"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key				Returned	Description
instance_target_groups complex				always	a list of target groups to which the instance is registered to
	target_group_arn string			always	The ARN of the target group Sample: ['arn:aws:elasticloadbalancing:eu-west-1:111111111111:targetgroup/target-group/deadbeefdeadbeef']
	target_group_type string			always	Which target type is used for this group Sample: ['ip', 'instance']
	targets complex			always	A list of targets that point to this instance ID
		target_az string		when an AZ is associated with this instance	which availability zone is explicitly associated with this target Sample: ['us-west-2a']
		target_health complex		always	The target health description. See following link for all the possible values https://boto3.readthedocs.io/en/latest/reference/services/elbv2.html#ElasticLoadBalancingv2.Client.describe_target_health
			description string	if state!=present	description of target health Sample: ['Target desregistration is in progress']
			reason string	if state!=healthy	reason code for target health Sample: ['Target.Deregistration in progress']
			state string	always	health state Sample: ['healthy', 'draining', 'initial', 'unhealthy', 'unused', 'unavailable']
		target_id string		always	the target ID referring to this instance Sample: ['i-deadbeef', '1.2.3.4']
		target_port string		always	which port this target is listening on Sample: [80]

Authors¶

Yaakov Kuperman (@yaakov-github)

community.aws.elb_target_info – Gathers which target groups a target is associated with.¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶