community.fortios.fmgr_fwobj_address – Allows the management of firewall objects in FortiManager¶

Note

This plugin is part of the community.fortios collection (version 1.0.0).

To install it use: ansible-galaxy collection install community.fortios.

To use it in a playbook, specify: community.fortios.fmgr_fwobj_address.

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis ¶

Allows for the management of IPv4, IPv6, and multicast address objects within FortiManager.

Parameters ¶

Parameter	Choices/Defaults	Comments
adom string	Default: "root"	The ADOM the configuration should belong to.
allow_routing string	Choices: enable disable ←	Enable/disable use of this address in the static route configuration.
associated_interface string		Associated interface name.
cache_ttl string		Minimal TTL of individual IP addresses in FQDN cache. Only applies when type = wildcard-fqdn.
color string	Default: 22	Color of the object in FortiManager GUI. Takes integers 1-32
comment string		Comment for the object in FortiManager.
country string		Country name. Required if type = geographic.
end_ip string		End IP. Only used when ipv4 = iprange.
fqdn string		Fully qualified domain name.
group_members string		Address group member. If this is defined w/out group_name, the operation will fail.
group_name string		Address group name. If this is defined in playbook task, all other options are ignored.
ipv4 string	Choices: ipmask iprange fqdn wildcard geography wildcard-fqdn group	Type of IPv4 Object. Must not be specified with either multicast or IPv6 parameters.
ipv4addr string		IP and network mask. If only defining one IP use this parameter. (i.e. 10.7.220.30/255.255.255.255) Can also define subnets (i.e. 10.7.220.0/255.255.255.0) Also accepts CIDR (i.e. 10.7.220.0/24) If Netmask is omitted after IP address, /32 is assumed. When multicast is set to Broadcast Subnet the ipv4addr parameter is used to specify the subnet.
ipv6 string	Choices: ip iprange group	Puts module into IPv6 mode. Must not be specified with either ipv4 or multicast parameters.
ipv6addr string		IPv6 address in full. (i.e. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)
mode string	Choices: add ← set delete	Sets one of three modes for managing the object.
multicast string	Choices: multicastrange broadcastmask ip6	Manages Multicast Address Objects. Sets either a Multicast IP Range or a Broadcast Subnet. Must not be specified with either ipv4 or ipv6 parameters. When set to Broadcast Subnet the ipv4addr parameter is used to specify the subnet. Can create IPv4 Multicast Objects (multicastrange and broadcastmask options -- uses start/end-ip and ipv4addr).
name string		Friendly Name Address object name in FortiManager.
obj_id string		Object ID for NSX.
start_ip string		Start IP. Only used when ipv4 = iprange.
visibility string	Choices: enable ← disable	Enable/disable address visibility.
wildcard string		IP address and wildcard netmask. Required if ipv4 = wildcard.
wildcard_fqdn string		Wildcard FQDN. Required if ipv4 = wildcard-fqdn.

Notes ¶

Note

Full Documentation at https://ftnt-ansible-docs.readthedocs.io/en/latest/.

Examples ¶

- name: ADD IPv4 IP ADDRESS OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.30/32"
    name: "ansible_v4Obj"
    comment: "Created by Ansible"
    color: "6"

- name: ADD IPv4 IP ADDRESS OBJECT MORE OPTIONS
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.34/32"
    name: "ansible_v4Obj_MORE"
    comment: "Created by Ansible"
    color: "6"
    allow_routing: "enable"
    cache_ttl: "180"
    associated_interface: "port1"
    obj_id: "123"

- name: ADD IPv4 IP ADDRESS SUBNET OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.0/255.255.255.128"
    name: "ansible_subnet"
    comment: "Created by Ansible"
    mode: "set"

- name: ADD IPv4 IP ADDRESS RANGE OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "iprange"
    start_ip: "10.7.220.1"
    end_ip: "10.7.220.125"
    name: "ansible_range"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS WILDCARD OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "wildcard"
    wildcard: "10.7.220.30/255.255.255.255"
    name: "ansible_wildcard"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS WILDCARD FQDN OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "wildcard-fqdn"
    wildcard_fqdn: "*.myds.com"
    name: "Synology myds DDNS service"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS FQDN OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "fqdn"
    fqdn: "ansible.com"
    name: "ansible_fqdn"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS GEO OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "geography"
    country: "usa"
    name: "ansible_geo"
    comment: "Created by Ansible"

- name: ADD IPv6 ADDRESS
  community.fortios.fmgr_fwobj_address:
    ipv6: "ip"
    ipv6addr: "2001:0db8:85a3:0000:0000:8a2e:0370:7334"
    name: "ansible_v6Obj"
    comment: "Created by Ansible"

- name: ADD IPv6 ADDRESS RANGE
  community.fortios.fmgr_fwobj_address:
    ipv6: "iprange"
    start_ip: "2001:0db8:85a3:0000:0000:8a2e:0370:7334"
    end_ip: "2001:0db8:85a3:0000:0000:8a2e:0370:7446"
    name: "ansible_v6range"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS GROUP
  community.fortios.fmgr_fwobj_address:
    ipv4: "group"
    group_name: "ansibleIPv4Group"
    group_members: "ansible_fqdn, ansible_wildcard, ansible_range"

- name: ADD IPv6 IP ADDRESS GROUP
  community.fortios.fmgr_fwobj_address:
    ipv6: "group"
    group_name: "ansibleIPv6Group"
    group_members: "ansible_v6Obj, ansible_v6range"

- name: ADD MULTICAST RANGE
  community.fortios.fmgr_fwobj_address:
    multicast: "multicastrange"
    start_ip: "224.0.0.251"
    end_ip: "224.0.0.251"
    name: "ansible_multicastrange"
    comment: "Created by Ansible"

- name: ADD BROADCAST SUBNET
  community.fortios.fmgr_fwobj_address:
    multicast: "broadcastmask"
    ipv4addr: "10.7.220.0/24"
    name: "ansible_broadcastSubnet"
    comment: "Created by Ansible"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
api_result string	always	full API response, includes status code and message

Authors¶

Luke Weighall (@lweighall)
Andrew Welsh (@Ghilli3)
Jim Huber (@p4r4n0y1ng)

community.fortios.fmgr_fwobj_address – Allows the management of firewall objects in FortiManager¶

Synopsis¶

Parameters¶

Notes¶

Examples¶

Return Values¶