community.general.hwc_vpc_eip – Creates a resource of Vpc/EIP in Huawei Cloud

Note

This plugin is part of the community.general collection (version 1.3.6).

To install it use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.hwc_vpc_eip.

New in version 0.2.0: of community.general

Synopsis

• elastic ip management.

Requirements

The below requirements are needed on the host that executes this module.

• keystoneauth1 >= 3.6.0

Parameters

Parameter		Choices/Defaults	Comments
dedicated_bandwidth dictionary			Specifies the dedicated bandwidth object.
	charge_mode string / required		Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China.
	name string / required		Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores _, hyphens (-), and periods (.).
	size integer / required		Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows. The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included). The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included). The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s.
domain string / required			The name of the Domain to scope to (Identity v3). (currently only domain names are supported, and not domain IDs).
enterprise_project_id string			Specifies the enterprise project ID.
id string			The id of resource to be managed.
identity_endpoint string / required			The Identity authentication URL.
ip_version integer			The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned.
ipv4_address string			Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it.
password string / required			The password to login with.
port_id string			Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP.
project string / required			The name of the Tenant (Identity v2) or Project (Identity v3). (currently only project names are supported, and not project IDs).
region string			The region to which the project belongs.
shared_bandwidth_id string			Specifies the ID of shared bandwidth.
state string		Choices: present ← absent	Whether the given object should exist in Huawei Cloud.
timeouts dictionary			The timeouts for each operations.
	create string	Default: "5m"	The timeouts for create operation.
	update string	Default: "5m"	The timeouts for update operation.
type string / required			Specifies the EIP type.
user string / required			The user name to login with (currently only user names are supported, and not user IDs).

Notes

Note

• For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT env variable.

• For authentication, you can set user using the ANSIBLE_HWC_USER env variable.

• For authentication, you can set password using the ANSIBLE_HWC_PASSWORD env variable.

• For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN env variable.

• For authentication, you can set project using the ANSIBLE_HWC_PROJECT env variable.

• For authentication, you can set region using the ANSIBLE_HWC_REGION env variable.

• Environment variables values will only be used if the playbook values are not set.

Examples

# create an eip and bind it to a port
- name: Create vpc
  hwc_network_vpc:
    cidr: "192.168.100.0/24"
    name: "ansible_network_vpc_test"
  register: vpc
- name: Create subnet
  hwc_vpc_subnet:
    gateway_ip: "192.168.100.32"
    name: "ansible_network_subnet_test"
    dhcp_enable: True
    vpc_id: "{{ vpc.id }}"
    cidr: "192.168.100.0/26"
  register: subnet
- name: Create a port
  hwc_vpc_port:
    subnet_id: "{{ subnet.id }}"
    ip_address: "192.168.100.33"
  register: port
- name: Create an eip and bind it to a port
  community.general.hwc_vpc_eip:
    type: "5_bgp"
    dedicated_bandwidth:
      charge_mode: "traffic"
      name: "ansible_test_dedicated_bandwidth"
      size: 1
    port_id: "{{ port.id }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
create_time string		success	Specifies the time (UTC time) when the EIP was assigned.
dedicated_bandwidth dictionary		success	Specifies the dedicated bandwidth object.
	charge_mode string	success	Specifies whether the bandwidth is billed by traffic or by bandwidth size. The value can be bandwidth or traffic. If this parameter is left blank or is null character string, default value bandwidth is used. For IPv6 addresses, the default parameter value is bandwidth outside China and is traffic in China.
	id string	success	Specifies the ID of dedicated bandwidth.
	name string	success	Specifies the bandwidth name. The value is a string of 1 to 64 characters that can contain letters, digits, underscores _, hyphens (-), and periods (.).
	size integer	success	Specifies the bandwidth size. The value ranges from 1 Mbit/s to 2000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.) The minimum unit for bandwidth adjustment varies depending on the bandwidth range. The details are as follows:. The minimum unit is 1 Mbit/s if the allowed bandwidth size ranges from 0 to 300 Mbit/s (with 300 Mbit/s included). The minimum unit is 50 Mbit/s if the allowed bandwidth size ranges 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included). The minimum unit is 500 Mbit/s if the allowed bandwidth size is greater than 1000 Mbit/s.
enterprise_project_id string		success	Specifies the enterprise project ID.
ip_version integer		success	The value can be 4 (IPv4 address) or 6 (IPv6 address). If this parameter is left blank, an IPv4 address will be assigned.
ipv4_address string		success	Specifies the obtained IPv4 EIP. The system automatically assigns an EIP if you do not specify it.
ipv6_address string		success	Specifies the obtained IPv6 EIP.
port_id string		success	Specifies the port ID. This parameter is returned only when a private IP address is bound with the EIP.
private_ip_address string		success	Specifies the private IP address bound with the EIP. This parameter is returned only when a private IP address is bound with the EIP.
shared_bandwidth_id string		success	Specifies the ID of shared bandwidth.
type string		success	Specifies the EIP type.

Authors

• Huawei Inc. (@huaweicloud)