community.general.nios_fixed_address – Configure Infoblox NIOS DHCP Fixed Address

Note

This plugin is part of the community.general collection (version 1.3.6).

To install it use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.nios_fixed_address.

Synopsis

• A fixed address is a specific IP address that a DHCP server always assigns when a lease request comes from a particular MAC address of the client.

• Supports both IPV4 and IPV6 internet protocols

Requirements

The below requirements are needed on the host that executes this module.

• infoblox-client

Parameters

Parameter		Choices/Defaults	Comments
comment string			Configures a text string comment to be associated with the instance of this object. The provided text string will be configured on the object instance.
extattrs string			Allows for the configuration of Extensible Attributes on the instance of the object. This argument accepts a set of key / value pairs for configuration.
ipaddr string / required			IPV4/V6 address of the fixed address.
mac string / required			The MAC address of the interface.
name string / required			Specifies the hostname with which fixed DHCP ip-address is stored for respective mac.
network string / required			Specifies the network range in which ipaddr exists.
network_view string		Default: "default"	Configures the name of the network view to associate with this configured instance.
options list / elements=dictionary			Configures the set of DHCP options to be included as part of the configured network instance. This argument accepts a list of values (see suboptions). When configuring suboptions at least one of name or num must be specified.
	name string		The name of the DHCP option to configure
	num string		The number of the DHCP option to configure
	use_option boolean	Choices: no yes ←	Only applies to a subset of options (see NIOS API documentation)
	value string / required		The value of the DHCP option specified by name
	vendor_class string	Default: "DHCP"	The name of the space this DHCP option is associated to
provider dictionary			A dict object containing connection details.
	host string		Specifies the DNS host name or address for connecting to the remote instance of NIOS WAPI over REST Value can also be specified using INFOBLOX_HOST environment variable.
	http_request_timeout integer	Default: 10	The amount of time before to wait before receiving a response Value can also be specified using INFOBLOX_HTTP_REQUEST_TIMEOUT environment variable.
	max_results integer	Default: 1000	Specifies the maximum number of objects to be returned, if set to a negative number the appliance will return an error when the number of returned objects would exceed the setting. Value can also be specified using INFOBLOX_MAX_RESULTS environment variable.
	max_retries integer	Default: 3	Configures the number of attempted retries before the connection is declared usable Value can also be specified using INFOBLOX_MAX_RETRIES environment variable.
	password string		Specifies the password to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_PASSWORD environment variable.
	username string		Configures the username to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_USERNAME environment variable.
	validate_certs boolean	Choices: no ← yes	Boolean value to enable or disable verifying SSL certificates Value can also be specified using INFOBLOX_SSL_VERIFY environment variable. aliases: ssl_verify
	wapi_version string	Default: "2.1"	Specifies the version of WAPI to use Value can also be specified using INFOBLOX_WAP_VERSION environment variable. Until ansible 2.8 the default WAPI was 1.4
state string		Choices: present ← absent	Configures the intended state of the instance of the object on the NIOS server. When this value is set to present, the object is configured on the device and when this value is set to absent the value is removed (if necessary) from the device.

Notes

Note

• This module must be run locally, which can be achieved by specifying connection: local.

• Please read the Infoblox Guide for more detailed information on how to use Infoblox with Ansible.

Examples

- name: Configure ipv4 dhcp fixed address
  community.general.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    comment: this is a test comment
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Configure a ipv6 dhcp fixed address
  community.general.nios_fixed_address:
    name: ipv6_fixed
    ipaddr: fe80::1/10
    mac: 08:6d:41:e8:fd:e8
    network: fe80::/64
    network_view: default
    comment: this is a test comment
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Set dhcp options for a ipv4 fixed address
  community.general.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    comment: this is a test comment
    options:
      - name: domain-name
        value: ansible.com
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Remove a ipv4 dhcp fixed address
  community.general.nios_fixed_address:
    name: ipv4_fixed
    ipaddr: 192.168.10.1
    mac: 08:6d:41:e8:fd:e8
    network: 192.168.10.0/24
    network_view: default
    state: absent
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

Authors

• Sumit Jaiswal (@sjaiswal)