community.general.nios_member – Configure Infoblox NIOS members

Note

This plugin is part of the community.general collection (version 1.3.6).

To install it use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.nios_member.

Synopsis

• Adds and/or removes Infoblox NIOS servers. This module manages NIOS member objects using the Infoblox WAPI interface over REST.

Requirements

The below requirements are needed on the host that executes this module.

• infoblox-client

Parameters

Parameter				Choices/Defaults	Comments
comment string					A descriptive comment of the Grid member.
config_addr_type string				Default: "IPV4"	Address configuration type (IPV4/IPV6/BOTH)
create_token boolean				Choices: no ← yes	Flag for initiating a create token request for pre-provisioned members.
enable_ha boolean				Choices: no yes	If set to True, the member has two physical nodes (HA pair).
extattrs string					Extensible attributes associated with the object.
external_syslog_server_enable boolean				Choices: no yes	Determines if external syslog servers should be enabled
host_name string / required					Specifies the host name of the member to either add or remove from the NIOS instance. aliases: name
ipv6_setting list / elements=dictionary					Configures the IPv6 settings for the grid member.
	cidr_prefix string				The IPv6 CIDR prefix for the Grid Member
	gateway string				The gateway address for the Grid Member
	virtual_ip string				The IPv6 Address of the Grid Member
lan2_enabled boolean				Choices: no yes	When set to "true", the LAN2 port is enabled as an independent port or as a port for failover purposes.
lan2_port_setting list / elements=dictionary					Settings for the Grid member LAN2 port if 'lan2_enabled' is set to "true".
	enabled boolean			Choices: no yes	If set to True, then it has its own IP settings.
	network_setting list / elements=dictionary				If the 'enable' field is set to True, this defines IPv4 network settings for LAN2.
		address string			The IPv4 Address of LAN2
		gateway string			The default gateway of LAN2
		subnet_mask string			The subnet mask of LAN2
	v6_network_setting list / elements=dictionary				If the 'enable' field is set to True, this defines IPv6 network settings for LAN2.
		cidr_prefix string			The IPv6 CIDR prefix of LAN2
		gateway string			The gateway address of LAN2
		virtual_ip string			The IPv6 Address of LAN2
mgmt_port_setting list / elements=dictionary					Settings for the member MGMT port.
	enabled boolean			Choices: no yes	Determines if MGMT port settings should be enabled.
	security_access_enabled boolean			Choices: no yes	Determines if security access on the MGMT port is enabled or not.
	vpn_enabled boolean			Choices: no yes	Determines if VPN on the MGMT port is enabled or not.
node_info list / elements=dictionary					Configures the node information list with detailed status report on the operations of the Grid Member.
	lan2_physical_setting list / elements=dictionary				Physical port settings for the LAN2 interface.
		auto_port_setting_enabled boolean		Choices: no yes	Enable or disalbe the auto port setting.
		duplex string			The port duplex; if speed is 1000, duplex must be FULL.
		speed string			The port speed; if speed is 1000, duplex is FULL.
	lan_ha_port_setting list / elements=dictionary				LAN/HA port settings for the node.
		ha_ip_address string			HA IP address.
		ha_port_setting list / elements=dictionary			Physical port settings for the HA interface.
			auto_port_setting_enabled boolean	Choices: no yes	Enable or disalbe the auto port setting.
			duplex string		The port duplex; if speed is 1000, duplex must be FULL.
			speed string		The port speed; if speed is 1000, duplex is FULL.
		lan_port_setting list / elements=dictionary			Physical port settings for the LAN interface.
			auto_port_setting_enabled boolean	Choices: no yes	Enable or disalbe the auto port setting.
			duplex string		The port duplex; if speed is 1000, duplex must be FULL.
			speed string		The port speed; if speed is 1000, duplex is FULL.
		mgmt_ipv6addr string			Public IPv6 address for the LAN1 interface.
		mgmt_lan string			Public IPv4 address for the LAN1 interface.
	mgmt_network_setting list / elements=dictionary				Network settings for the MGMT port of the node.
		address string			The IPv4 Address of MGMT
		gateway string			The default gateway of MGMT
		subnet_mask string			The subnet mask of MGMT
	v6_mgmt_network_setting list / elements=dictionary				The network settings for the IPv6 MGMT port of the node.
		cidr_prefix string			The IPv6 CIDR prefix of MGMT
		gateway string			The gateway address of MGMT
		virtual_ip string			The IPv6 Address of MGMT
platform string				Default: "INFOBLOX"	Configures the Hardware Platform.
pre_provisioning list / elements=dictionary					Pre-provisioning information.
	hardware_info list / elements=dictionary				An array of structures that describe the hardware being pre-provisioned.
		hwmodel string			Hardware model
		hwtype string			Hardware type.
	licenses string				An array of license types.
provider dictionary					A dict object containing connection details.
	host string				Specifies the DNS host name or address for connecting to the remote instance of NIOS WAPI over REST Value can also be specified using INFOBLOX_HOST environment variable.
	http_request_timeout integer			Default: 10	The amount of time before to wait before receiving a response Value can also be specified using INFOBLOX_HTTP_REQUEST_TIMEOUT environment variable.
	max_results integer			Default: 1000	Specifies the maximum number of objects to be returned, if set to a negative number the appliance will return an error when the number of returned objects would exceed the setting. Value can also be specified using INFOBLOX_MAX_RESULTS environment variable.
	max_retries integer			Default: 3	Configures the number of attempted retries before the connection is declared usable Value can also be specified using INFOBLOX_MAX_RETRIES environment variable.
	password string				Specifies the password to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_PASSWORD environment variable.
	username string				Configures the username to use to authenticate the connection to the remote instance of NIOS. Value can also be specified using INFOBLOX_USERNAME environment variable.
	validate_certs boolean			Choices: no ← yes	Boolean value to enable or disable verifying SSL certificates Value can also be specified using INFOBLOX_SSL_VERIFY environment variable. aliases: ssl_verify
	wapi_version string			Default: "2.1"	Specifies the version of WAPI to use Value can also be specified using INFOBLOX_WAP_VERSION environment variable. Until ansible 2.8 the default WAPI was 1.4
router_id string					Virtual router identifier. Provide this ID if "ha_enabled" is set to "true". This is a unique VRID number (from 1 to 255) for the local subnet.
state string				Choices: present ← absent	Configures the intended state of the instance of the object on the NIOS server. When this value is set to present, the object is configured on the device and when this value is set to absent the value is removed (if necessary) from the device.
syslog_servers list / elements=dictionary					The list of external syslog servers.
	address string				The server address.
	category_list string				The list of all syslog logging categories.
	connection_type string			Default: "UDP"	The connection type for communicating with this server.(STCP/TCP?UDP)
	local_interface string			Default: "ANY"	The local interface through which the appliance sends syslog messages to the syslog server.(ANY/LAN/MGMT)
	message_node_id string			Default: "LAN"	Identify the node in the syslog message. (HOSTNAME/IP_HOSTNAME/LAN/MGMT)
	message_source string			Default: "ANY"	The source of syslog messages to be sent to the external syslog server.
	only_category_list boolean			Choices: no yes	The list of selected syslog logging categories. The appliance forwards syslog messages that belong to the selected categories.
	port string			Default: 514	The port this server listens on.
	severity string			Default: "DEBUG"	The severity filter. The appliance sends log messages of the specified severity and above to the external syslog server.
upgrade_group string				Default: "Default"	The name of the upgrade group to which this Grid member belongs.
use_syslog_proxy_setting boolean				Choices: no yes	Use flag for external_syslog_server_enable , syslog_servers, syslog_proxy_setting, syslog_size
vip_setting list / elements=dictionary					Configures the network settings for the grid member.
	address string				The IPv4 Address of the Grid Member
	gateway string				The default gateway for the Grid Member
	subnet_mask string				The subnet mask for the Grid Member

Notes

Note

• This module must be run locally, which can be achieved by specifying connection: local.

• Please read the Infoblox Guide for more detailed information on how to use Infoblox with Ansible.

Examples

- name: Add a member to the grid with IPv4 address
  community.general.nios_member:
    host_name: member01.localdomain
    vip_setting:
      - address: 192.168.1.100
        subnet_mask: 255.255.255.0
        gateway: 192.168.1.1
    config_addr_type: IPV4
    platform: VNIOS
    comment: "Created by Ansible"
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Add a HA member to the grid
  community.general.nios_member:
    host_name: memberha.localdomain
    vip_setting:
      - address: 192.168.1.100
        subnet_mask: 255.255.255.0
        gateway: 192.168.1.1
    config_addr_type: IPV4
    platform: VNIOS
    enable_ha: true
    router_id: 150
    node_info:
      - lan_ha_port_setting:
         - ha_ip_address: 192.168.1.70
           mgmt_lan: 192.168.1.80
      - lan_ha_port_setting:
         - ha_ip_address: 192.168.1.71
           mgmt_lan: 192.168.1.81
    comment: "Created by Ansible"
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Update the member with pre-provisioning details specified
  community.general.nios_member:
    name: member01.localdomain
    pre_provisioning:
      - hardware_info:
         - hwmodel: IB-VM-820
           hwtype: IB-VNIOS
        licenses:
         - dns
         - dhcp
         - enterprise
         - vnios
    comment: "Updated by Ansible"
    state: present
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local
- name: Remove the member
  community.general.nios_member:
    name: member01.localdomain
    state: absent
    provider:
      host: "{{ inventory_hostname_short }}"
      username: admin
      password: admin
  connection: local

Authors

• Krishna Vasudevan (@krisvasudevan)