community.general.ss_3par_cpg – Manage HPE StoreServ 3PAR CPG

Note

This plugin is part of the community.general collection (version 1.3.6).

To install it use: ansible-galaxy collection install community.general.

To use it in a playbook, specify: community.general.ss_3par_cpg.

Synopsis

• Create and delete CPG on HPE 3PAR.

Requirements

The below requirements are needed on the host that executes this module.

• hpe3par_sdk >= 1.0.2. Install using ‘pip install hpe3par_sdk’

• WSAPI service should be enabled on the 3PAR storage array.

Parameters

Parameter	Choices/Defaults	Comments
cpg_name string / required		Name of the CPG.
disk_type string	Choices: FC NL SSD	Specifies that physical disks must have the specified device type.
domain string		Specifies the name of the domain in which the object will reside.
growth_increment string		Specifies the growth increment(in MiB, GiB or TiB) the amount of logical disk storage created on each auto-grow operation.
growth_limit string		Specifies that the autogrow operation is limited to the specified storage amount that sets the growth limit(in MiB, GiB or TiB).
growth_warning string		Specifies that the threshold(in MiB, GiB or TiB) of used logical disk space when exceeded results in a warning alert.
high_availability string	Choices: PORT CAGE MAG	Specifies that the layout must support the failure of one port pair, one cage, or one magazine.
raid_type string	Choices: R0 R1 R5 R6	Specifies the RAID type for the logical disk.
secure boolean	Choices: no ← yes	Specifies whether the certificate needs to be validated while communicating.
set_size integer		Specifies the set size in the number of chunklets.
state string / required	Choices: present absent	Whether the specified CPG should exist or not.
storage_system_ip string / required		The storage system IP address.
storage_system_password string / required		The storage system password.
storage_system_username string / required		The storage system user name.

Notes

Note

• check_mode not supported

Examples

- name: Create CPG sample_cpg
  community.general.ss_3par_cpg:
    storage_system_ip: 10.10.10.1
    storage_system_username: username
    storage_system_password: password
    state: present
    cpg_name: sample_cpg
    domain: sample_domain
    growth_increment: 32000 MiB
    growth_limit: 64000 MiB
    growth_warning: 48000 MiB
    raid_type: R6
    set_size: 8
    high_availability: MAG
    disk_type: FC
    secure: no

- name: Delete CPG sample_cpg
  community.general.ss_3par_cpg:
    storage_system_ip: 10.10.10.1
    storage_system_username: username
    storage_system_password: password
    state: absent
    cpg_name: sample_cpg
    secure: no

Authors

• Farhan Nomani (@farhan7500)

• Gautham P Hegde (@gautamphegde)