community.network.ce_acl_advance – Manages advanced ACL configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_acl_advance.

Synopsis

• Manages advanced ACL configurations on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
acl_description string		ACL description. The value is a string of 1 to 127 characters.
acl_name string / required		ACL number or name. For a numbered rule group, the value ranging from 3000 to 3999 indicates a advance ACL. For a named rule group, the value is a string of 1 to 32 case-sensitive characters starting with a letter, spaces not supported.
acl_num string		ACL number. The value is an integer ranging from 3000 to 3999.
acl_step string		ACL step. The value is an integer ranging from 1 to 20. The default value is 5.
dest_ip string		Destination IP address. The value is a string of 0 to 255 characters.The default value is 0.0.0.0. The value is in dotted decimal notation.
dest_mask string		Destination IP address mask. The value is an integer ranging from 1 to 32.
dest_pool_name string		Name of a destination pool. The value is a string of 1 to 32 characters.
dest_port_begin string		Start port number of the destination port. The value is an integer ranging from 0 to 65535.
dest_port_end string		End port number of the destination port. The value is an integer ranging from 0 to 65535.
dest_port_op string	Choices: lt eq gt range	Range type of the destination port.
dest_port_pool_name string		Name of a destination port pool. The value is a string of 1 to 32 characters.
dscp string		Differentiated Services Code Point. The value is an integer ranging from 0 to 63.
established boolean	Choices: no ← yes	Match established connections.
frag_type string	Choices: fragment clear_fragment	Type of packet fragmentation.
icmp_code string		ICMP message code. Data packets can be filtered based on the ICMP message code. The value is an integer ranging from 0 to 255.
icmp_name string	Choices: unconfiged echo echo-reply fragmentneed-DFset host-redirect host-tos-redirect host-unreachable information-reply information-request net-redirect net-tos-redirect net-unreachable parameter-problem port-unreachable protocol-unreachable reassembly-timeout source-quench source-route-failed timestamp-reply timestamp-request ttl-exceeded address-mask-reply address-mask-request custom	ICMP name.
icmp_type string		ICMP type. This parameter is available only when the packet protocol is ICMP. The value is an integer ranging from 0 to 255.
igmp_type string	Choices: host-query mrouter-adver mrouter-solic mrouter-termi mtrace-resp mtrace-route v1host-report v2host-report v2leave-group v3host-report	Internet Group Management Protocol.
log_flag boolean	Choices: no ← yes	Flag of logging matched data packets.
precedence string		Data packets can be filtered based on the priority field. The value is an integer ranging from 0 to 7.
protocol string	Choices: ip icmp igmp ipinip tcp udp gre ospf	Protocol type.
rule_action string	Choices: permit deny	Matching mode of basic ACL rules.
rule_description string		Description about an ACL rule.
rule_id string		ID of a basic ACL rule in configuration mode. The value is an integer ranging from 0 to 4294967294.
rule_name string		Name of a basic ACL rule. The value is a string of 1 to 32 characters.
source_ip string		Source IP address. The value is a string of 0 to 255 characters.The default value is 0.0.0.0. The value is in dotted decimal notation.
src_mask string		Source IP address mask. The value is an integer ranging from 1 to 32.
src_pool_name string		Name of a source pool. The value is a string of 1 to 32 characters.
src_port_begin string		Start port number of the source port. The value is an integer ranging from 0 to 65535.
src_port_end string		End port number of the source port. The value is an integer ranging from 0 to 65535.
src_port_op string	Choices: lt eq gt range	Range type of the source port.
src_port_pool_name string		Name of a source port pool. The value is a string of 1 to 32 characters.
state string	Choices: present ← absent delete_acl	Specify desired state of the resource.
syn_flag string		TCP flag value. The value is an integer ranging from 0 to 63.
tcp_flag_mask string		TCP flag mask value. The value is an integer ranging from 0 to 63.
time_range string		Name of a time range in which an ACL rule takes effect.
tos string		ToS value on which data packet filtering is based. The value is an integer ranging from 0 to 15.
ttl_expired boolean	Choices: no ← yes	Whether TTL Expired is matched, with the TTL value of 1.
vrf_name string		VPN instance name. The value is a string of 1 to 31 characters.The default value is _public_.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: CloudEngine advance acl test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: "Config ACL"
    community.network.ce_acl_advance:
      state: present
      acl_name: 3200
      provider: "{{ cli }}"

  - name: "Undo ACL"
    community.network.ce_acl_advance:
      state: delete_acl
      acl_name: 3200
      provider: "{{ cli }}"

  - name: "Config ACL advance rule"
    community.network.ce_acl_advance:
      state: present
      acl_name: test
      rule_name: test_rule
      rule_id: 111
      rule_action: permit
      protocol: tcp
      source_ip: 10.10.10.10
      src_mask: 24
      frag_type: fragment
      provider: "{{ cli }}"

  - name: "Undo ACL advance rule"
    community.network.ce_acl_advance:
      state: absent
      acl_name: test
      rule_name: test_rule
      rule_id: 111
      rule_action: permit
      protocol: tcp
      source_ip: 10.10.10.10
      src_mask: 24
      frag_type: fragment
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of aaa params after module execution
existing dictionary	always	k/v pairs of existing aaa server Sample: {'aclNumOrName': 'test', 'aclType': 'Advance'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'acl_name': 'test', 'state': 'delete_acl'}
updates list / elements=string	always	command sent to the device Sample: ['undo acl name test']

Authors

• wangdezhuang (@QijunPan)