community.network.ce_interface_ospf – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_interface_ospf.

Synopsis

• Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
area string / required		Ospf area associated with this ospf process. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295.
auth_key_id string		Authentication key id when auth_mode is 'hmac-sha256', 'md5' or 'hmac-md5. Valid value is an integer is in the range from 1 to 255.
auth_mode string	Choices: none null hmac-sha256 md5 hmac-md5 simple	Specifies the authentication type.
auth_text_md5 string		Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported.
auth_text_simple string		Specifies a password for simple authentication. The value is a string of 1 to 8 characters.
cost string		The cost associated with this interface. Valid values are an integer in the range from 1 to 65535.
dead_interval string		Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer in the range from 1 to 235926000.
hello_interval string		Time between sending successive hello packets. Valid values are an integer in the range from 1 to 65535.
interface string / required		Full name of interface, i.e. 40GE1/0/10.
process_id string / required		Specifies a process ID. The value is an integer ranging from 1 to 4294967295.
silent_interface boolean	Choices: no ← yes	Setting to true will prevent this interface from receiving HELLO packets. Valid values are 'true' and 'false'.
state string	Choices: present ← absent	Determines whether the config should be present or not on the device.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: Eth_trunk module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Enables OSPF and sets the cost on an interface
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      cost: 100
      provider: '{{ cli }}'

  - name: Sets the dead interval of the OSPF neighbor
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      dead_interval: 100
      provider: '{{ cli }}'

  - name: Sets the interval for sending Hello packets on an interface
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      hello_interval: 2
      provider: '{{ cli }}'

  - name: Disables an interface from receiving and sending OSPF packets
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      silent_interface: true
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	verbose mode	k/v pairs of configuration after module execution Sample: {'area': '0.0.0.100', 'auth_mode': 'none', 'cost': '100', 'dead_interval': '40', 'hello_interval': '10', 'interface': '10GE1/0/30', 'process_id': '1', 'silent_interface': 'false'}
existing dictionary	verbose mode	k/v pairs of existing configuration Sample: {'area': '0.0.0.100', 'process_id': '1'}
proposed dictionary	verbose mode	k/v pairs of parameters passed into module Sample: {'area': '0.0.0.100', 'cost': '100', 'interface': '10GE1/0/30', 'process_id': '1'}
updates list / elements=string	always	commands sent to the device Sample: ['interface 10GE1/0/30', 'ospf enable 1 area 0.0.0.100', 'ospf cost 100']

Authors

• QijunPan (@QijunPan)