community.network.ce_is_is_interface – Manages isis interface configuration on HUAWEI CloudEngine devices.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_is_is_interface.

New in version 0.2.0: of community.network

Synopsis

• Manages isis process id, creates a isis instance id or deletes a process id on HUAWEI CloudEngine devices.

Parameters

Parameter	Choices/Defaults	Comments
bfdblocken boolean	Choices: no yes	Blocking interfaces to dynamically create BFD features. The value is a bool type.
bfdstaticen boolean	Choices: no yes	Configure static BFD on a specific interface enabled with ISIS. The value is a bool type.
ifname string / required		A L3 interface.
instance_id integer / required		Specifies the id of a isis process. The value is a number of 1 to 4294967295.
level1cost integer		Specifies the link cost of the interface when performing Level-1 SPF calculation. The value is a number of 0 to 16777215.
level1dispriority integer		the dispriority of the level1. The value is a number of 1 to 127.
level2cost integer		Specifies the link cost of the interface when performing Level-2 SPF calculation. The value is a number of 0 to 16777215.
level2dispriority integer		the dispriority of the level1. The value is a number of 1 to 127.
leveltype string	Choices: level_1 level_2 level_1_2	level type for three types.
p2pnegotiationmode string	Choices: 2_way 3_way 3_wayonly	Set the P2P neighbor negotiation type.
p2ppeeripignore boolean	Choices: no yes	When the P2P hello packet is received, no IP address check is performed. The value is a bool type.
ppposicpcheckenable boolean	Choices: no yes	Interface for setting PPP link protocol to check OSICP negotiation status. The value is a bool type.
silentcost boolean	Choices: no yes	Specifies whether the routing cost of the silent interface is 0. The value is a bool type.
silentenable boolean	Choices: no yes	enable the interface can send isis message. The value is a bool type.
snpacheck boolean	Choices: no yes	Enable SNPA check for LSPs and SNPs. The value is a bool type.
state string	Choices: present ← absent	Determines whether the config should be present or not on the device.
typep2penable boolean	Choices: no yes	Simulate the network type of the interface as P2P. The value is a bool type.

Notes

Note

• Interface must already be a L3 port when using this module.

• This module requires the netconf system service be enabled on the remote device being managed.

• This module works with connection netconf.

Examples

- name: "create vlan and config vlanif"
  ce_config:
    lines: 'vlan {{ test_vlan_id }},quit,interface {{test_intf_vlanif}},ip address {{test_vlanif_ip}} 24'
    match: none

- name: "create eth-trunk and config eth-trunk"
  ce_config:
    lines: 'interface {{test_intf_trunk}},undo portswitch,ip address {{test_trunk_ip}} 24'
    match: none

- name: "create vpn instance"
  ce_config:
    lines: 'ip vpn-instance {{test_vpn}},ipv4-family'
    match: none

- name: Set isis circuit-level
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    leveltype: level_1_2
    state: present

- name: Set isis level1dispriority
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    level1dispriority: 0
    state: present

- name: Set isis level2dispriority
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    level2dispriority: 0
    state: present

- name: Set isis silentenable
  community.network.ce_is_is_interface:
    instance_id: 3
    ifname: Eth-Trunk10
    silentenable: true
    state: present

- name: Set vpn name
  ce_is_is_instance:
    instance_id: 22
    vpn_name: vpn1
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of configuration after module execution Sample: {'session': {'addrType': 'IPV4', 'createType': 'SESS_STATIC', 'destAddr': None, 'outIfName': '10GE1/0/1', 'sessName': 'bfd_l2link', 'srcAddr': None, 'useDefaultIp': 'true', 'vrfName': None}}
existing dictionary	always	k/v pairs of existing configuration Sample: {'session': {}}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'addr_type': None, 'create_type': None, 'dest_addr': None, 'out_if_name': '10GE1/0/1', 'session_name': 'bfd_l2link', 'src_addr': None, 'state': 'present', 'use_default_ip': True, 'vrf_name': None}
updates list / elements=string	always	commands sent to the device Sample: ['bfd bfd_l2link bind peer-ip default-ip interface 10ge1/0/1']

Authors

• xuxiaowei0512 (@CloudEngine-Ansible)