community.network.ce_lldp_interface – Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_lldp_interface.

New in version 0.2.0: of community.network

Synopsis

• Manages INTERFACE LLDP configuration on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
dcbx boolean	Choices: no yes	Enable the ability to send DCBX TLV.
eee boolean	Choices: no yes	Enable the ability to send EEE TLV.
function_lldp_interface_flag string	Choices: disableINTERFACE tlvdisableINTERFACE tlvenableINTERFACE intervalINTERFACE	Used to distinguish between command line functions.
ifname string		Interface name.
linkaggretxenable boolean	Choices: no yes	Enable the ability to send link aggregation TLV.
lldpadminstatus string	Choices: txOnly rxOnly txAndRx disabled	Set interface lldp enable state.
lldpenable string	Choices: enabled disabled	Set global LLDP enable state.
macphytxenable boolean	Choices: no yes	Enable MAC/PHY configuration and state TLV to be sent.
manaddrtxenable boolean	Choices: no yes	Make it able to send management address TLV.
maxframetxenable boolean	Choices: no yes	Enable the ability to send maximum frame length TLV.
portdesctxenable boolean	Choices: no yes	Enabling the ability to send a description of TLV.
portvlantxenable boolean	Choices: no yes	Enable port vlan tx.
protoidtxenable boolean	Choices: no yes	Enable the ability to send protocol identity TLV.
protovlantxenable boolean	Choices: no yes	Enable protocol vlan tx.
state string	Choices: present ← absent	Manage the state of the resource.
syscaptxenable boolean	Choices: no yes	Enable the ability to send system capabilities TLV.
sysdesctxenable boolean	Choices: no yes	Enable the ability to send system description TLV.
sysnametxenable boolean	Choices: no yes	Enable the ability to send system name TLV.
txinterval integer		LLDP send message interval.
txprotocolvlanid integer		Set tx protocol vlan id.
txvlannameid integer		Set tx vlan name id.
type_tlv_disable string	Choices: basic_tlv dot3_tlv	Used to distinguish between command line functions.
type_tlv_enable string	Choices: dot1_tlv dcbx	Used to distinguish between command line functions.
vlannametxenable boolean	Choices: no yes	Set vlan name tx enable or not.

Notes

Note

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: "Configure global LLDP enable state"
  ce_lldp_interface_interface:
    lldpenable: enabled

- name: "Configure interface lldp enable state"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: disableINTERFACE
    ifname: 10GE1/0/1
    lldpadminstatus: rxOnly
- name: "Configure LLDP transmit interval and ensure global LLDP state is already enabled"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: intervalINTERFACE
    ifname: 10GE1/0/1
    txinterval: 4

- name: "Configure basic-tlv: management-address TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    manaddrtxenable: true

- name: "Configure basic-tlv: prot description TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    portdesctxenable: true

- name: "Configure basic-tlv: system capabilities TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    syscaptxenable: true

- name: "Configure basic-tlv: system description TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    sysdesctxenable: true

- name: "Configure basic-tlv: system name TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: basic_tlv
    ifname: 10GE1/0/1
    sysnametxenable: true

- name: "TLV types that are forbidden to be published on the configuration interface, link aggregation TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    linkAggreTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, MAC/PHY configuration/status TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    macPhyTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, maximum frame size TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    maxFrameTxEnable: true

- name: "TLV types that are forbidden to be published on the configuration interface, EEE TLV"
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvdisableINTERFACE
    type_tlv_disable: dot3_tlv
    ifname: 10GE1/0/1
    eee: true

- name: "Configure the interface to publish an optional DCBX TLV type "
  community.network.ce_lldp_interface:
    function_lldp_interface_flag: tlvenableINTERFACE
    ifname: 10GE1/0/1
    type_tlv_enable: dcbx

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of global DLDP configration after module execution Sample: {'function_lldp_interface_flag': 'tlvenableINTERFACE', 'ifname': '10GE1/0/1', 'lldpadminstatus': 'rxOnly', 'lldpenable': 'enabled', 'type_tlv_enable': 'dot1_tlv'}
existing dictionary	always	k/v pairs of existing global LLDP configration Sample: {'ifname': '10GE1/0/1', 'lldpadminstatus': 'txAndRx', 'lldpenable': 'disabled'}
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'function_lldp_interface_flag': 'tlvenableINTERFACE', 'ifname': '10GE1/0/1', 'lldpadminstatus': 'rxOnly', 'lldpenable': 'enabled', 'state': 'present', 'type_tlv_enable': 'dot1_tlv'}
updates list / elements=string	always	command sent to the device Sample: ['lldp enable', 'interface 10ge 1/0/1', 'undo lldp disable', 'lldp tlv-enable dot1-tlv vlan-name 4']

Authors

• xuxiaowei0512 (@CloudEngine-Ansible)