community.network.ce_static_route – Manages static route configuration on HUAWEI CloudEngine switches.

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_static_route.

Synopsis

• Manages the static routes on HUAWEI CloudEngine switches.

Parameters

Parameter	Choices/Defaults	Comments
aftype string / required	Choices: v4 v6	Destination ip address family type of static route.
description string		Name of the route. Used with the name parameter on the CLI.
destvrf string		VPN instance of next hop ip address.
mask string / required		Destination ip mask of static route.
next_hop string		Next hop address of static route.
nhp_interface string		Next hop interface full name of static route.
pref string		Preference or administrative difference of route (range 1-255).
prefix string / required		Destination ip address of static route.
state string	Choices: present ← absent	Specify desired state of the resource.
tag string		Route tag value (numeric).
vrf string		VPN instance of destination ip address.

Notes

Note

• If no vrf is supplied, vrf is set to default.

• If state=absent, the route will be removed, regardless of the non-required parameters.

• This module requires the netconf system service be enabled on the remote device being managed.

• Recommended connection is netconf.

• This module also works with local connections for legacy playbooks.

Examples

- name: Static route module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:

  - name: Config a ipv4 static route, next hop is an address and that it has the proper description
    community.network.ce_static_route:
      prefix: 2.1.1.2
      mask: 24
      next_hop: 3.1.1.2
      description: 'Configured by Ansible'
      aftype: v4
      provider: "{{ cli }}"
  - name: Config a ipv4 static route ,next hop is an interface and that it has the proper description
    community.network.ce_static_route:
      prefix: 2.1.1.2
      mask: 24
      next_hop: 10GE1/0/1
      description: 'Configured by Ansible'
      aftype: v4
      provider: "{{ cli }}"
  - name: Config a ipv6 static route, next hop is an address and that it has the proper description
    community.network.ce_static_route:
      prefix: fc00:0:0:2001::1
      mask: 64
      next_hop: fc00:0:0:2004::1
      description: 'Configured by Ansible'
      aftype: v6
      provider: "{{ cli }}"
  - name: Config a ipv4 static route, next hop is an interface and that it has the proper description
    community.network.ce_static_route:
      prefix: fc00:0:0:2001::1
      mask: 64
      next_hop: 10GE1/0/1
      description: 'Configured by Ansible'
      aftype: v6
      provider: "{{ cli }}"
  - name: Config a VRF and set ipv4 static route, next hop is an address and that it has the proper description
    community.network.ce_static_route:
      vrf: vpna
      prefix: 2.1.1.2
      mask: 24
      next_hop: 3.1.1.2
      description: 'Configured by Ansible'
      aftype: v4
      provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state dictionary	always	k/v pairs of switchport after module execution Sample: {'description': 'testing', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.0', 'tag': 'null'}
existing dictionary	always	k/v pairs of existing switchport
proposed dictionary	always	k/v pairs of parameters passed into module Sample: {'description': 'testing', 'mask': '24', 'next_hop': '3.3.3.3', 'pref': '100', 'prefix': '192.168.20.642', 'vrf': '_public_'}
updates list / elements=string	always	command list sent to the device Sample: ['ip route-static 192.168.20.0 255.255.255.0 3.3.3.3 preference 100 description testing']

Authors

• Yang yang (@QijunPan)