community.network.nos_config – Manage Extreme Networks NOS configuration sections

Note

This plugin is part of the community.network collection (version 1.3.2).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.nos_config.

Synopsis

• Extreme NOS configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with NOS configuration sections in a deterministic way.

Note

This module has a corresponding action plugin.

Parameters

Parameter		Choices/Defaults	Comments
after string			The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with before this allows the playbook designer to append a set of commands to be executed after the command set.
backup boolean		Choices: no ← yes	This argument will cause the module to create a full backup of the current running-config from the remote device before any changes are made. If the backup_options value is not given, the backup file is written to the backup folder in the playbook root directory. If the directory does not exist, it is created.
backup_options dictionary			This is a dict object containing configurable options related to backup file path. The value of this option is read only when backup is set to yes, if backup is set to no this option will be silently ignored.
	dir_path path		This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of filename or default filename as described in filename options description. If the path value is not given in that case a backup directory will be created in the current working directory and backup configuration will be copied in filename within backup directory.
	filename string		The filename to be used to store the backup configuration. If the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time>
before string			The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system.
diff_against string		Choices: running intended	When using the ansible-playbook --diff command line argument the module can generate diffs against different sources. When this option is configured as intended, the module will return the diff of the running-config against the configuration provided in the intended_config argument. When this option is configured as running, the module will return the before and after diff of the running-config with respect to any changes made to the device configuration.
diff_ignore_lines string			Use this argument to specify one or more lines that should be ignored during the diff. This is used for lines in the configuration that are automatically updated by the system. This argument takes a list of regular expressions or exact line matches.
intended_config string			The intended_config provides the master configuration that the node should conform to and is used to check the final running-config against. This argument will not modify any settings on the remote device and is strictly used to check the compliance of the current device's configuration against. When specifying this argument, the task should also modify the diff_against value and set it to intended.
lines string			The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. aliases: commands
match string		Choices: line ← strict exact none	Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to line, commands are matched line by line. If match is set to strict, command lines are matched with respect to position. If match is set to exact, command lines must be an equal match. Finally, if match is set to none, the module will not attempt to compare the source configuration with the running configuration on the remote device.
multiline_delimiter string		Default: "@"	This argument is used when pushing a multiline configuration element to the NOS device. It specifies the character to use as the delimiting character. This only applies to the configuration action.
parents string			The ordered set of parents that uniquely identify the section or hierarchy the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands.
replace string		Choices: line ← block	Instructs the module on the way to perform the configuration on the device. If the replace argument is set to line then the modified lines are pushed to the device in configuration mode. If the replace argument is set to block then the entire command block is pushed to the device in configuration mode if any line is not correct.
running_config string			The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. aliases: config
src string			Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with lines, parents.

Notes

Note

• Tested against NOS 7.2.0

Examples

- name: Configure top level configuration
  community.network.nos_config:
    lines: logging raslog console INFO

- name: Configure interface settings
  community.network.nos_config:
    lines:
      - description test interface
      - ip address 172.31.1.1/24
    parents:
      - interface TenGigabitEthernet 104/0/1

- name: Configure multiple interfaces
  community.network.nos_config:
    lines:
      - lacp timeout long
    parents: "{{ item }}"
  with_items:
    - interface TenGigabitEthernet 104/0/1
    - interface TenGigabitEthernet 104/0/2

- name: Load new acl into device
  community.network.nos_config:
    lines:
      - seq 10 permit ip host 1.1.1.1 any log
      - seq 20 permit ip host 2.2.2.2 any log
      - seq 30 permit ip host 3.3.3.3 any log
      - seq 40 permit ip host 4.4.4.4 any log
      - seq 50 permit ip host 5.5.5.5 any log
    parents: ip access-list extended test
    before: no ip access-list extended test
    match: exact

- name: Check the running-config against master config
  community.network.nos_config:
    diff_against: intended
    intended_config: "{{ lookup('file', 'master.cfg') }}"

- name: Configurable backup path
  community.network.nos_config:
    lines: logging raslog console INFO
    backup: yes
    backup_options:
      filename: backup.cfg
      dir_path: /home/user

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
backup_path string	when backup is yes	The full path to the backup file Sample: /playbooks/ansible/backup/nos_config.2018-02-12@18:26:34
commands list / elements=string	always	The set of commands that will be pushed to the remote device Sample: ['switch-attributes hostname foo', 'router ospf', 'area 0']
updates list / elements=string	always	The set of commands that will be pushed to the remote device Sample: ['switch-attributes hostname foo', 'router ospf', 'area 0']

Authors

• Lindsay Hill (@LindsayHill)